Alloy USA Dana 35 Rear Axle Shaft - 21108
84-90 Cherokee XJ;Alloy USA Chromoly Replacement Axle Shaft;Dana 35;30 Spline;5 on 4.5in. And 5 on 5.5in Dual Bolt Pattern;Passenger Side;28.840 Overall Length;Does NOT Include Bearings Seals Or Studs;For Use In 87-90 Non C Clip;Requires Use Of After Market 30 Spline Differential; California Residents: WARNING Do not just replace your axle shafts, upgrade them. For less than the cost or an original replacement axle shaft you can upgrade to an Alloy USA performance shaft. Our axles are made from 1541H or 4140 steel depending on the application. Each axle is heat-treated and induction hardened to have twice the tensile strength than stock and is up to 35% stronger.
149.99 USD
Alloy USA Dana 44 Front Inner Axle Shaft (Passenger Side) - 10114
03-06 Wrangler TJ/LJ;Dana 44;Front inner axle shaft;Passenger side;30 spline;31.88 inches long;CNC machined;Limited 10 year warranty; California Residents: WARNING High tensile strength 4340 Chromoly is heat-treated, tempered and induction hardened to produce these heavy-duty axles that are up to 40% stronger than stock 1040 axles. Each axle shaft is backed by Alloy-USA's exclusive ten-year warranty.
224.69 USD
Alloy USA Dana 44 Rear Axle Shaft - 21124
94-98 Grand Cherokee ZJ;Chromolly Replacement Axle Shaft;Dana 44;30 Spline;5 on 4.5in. Bolt Pattern;29.250in. Overall Length;Passenger Side;Does NOT Include Bearings Seals Or Studs; California Residents: WARNING Don't just replace your axle shafts, upgrade them. For less than the cost or an original replacement axle shaft you can upgrade to an Alloy USA performance shaft. Our axles are made from 1541H or 4140 steel depending on the application. Each axle is heat-treated and induction hardened to have twice the tensile strength than stock and is up to 35% stronger.
153.99 USD
Dana Spicer Drive Axle Shaft - 73898-2X
Front right inner Dana 30 axle;Non-ABS;27 spline;Inner shaft length (in): 32.38;U-joint not included;Takes 1310 series u-joint;Semi-floating design; California Residents: WARNING Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
112.32 USD
Yukon Gear & Axle Dana 44/ M220 32 Spline Left Rear Chromoly Axle (32.2 Long) - YAWD44JL-32-32.2
Dana 44/ 220mm Rear, Jeep JL & JT;32.2 long left rear axle kit;32 spline;Double drilled for improved performance and reliability;Provides the most confidence off-road, on the street or at the track;Yukon products are built to withstand the harshest conditions; California Residents: WARNING Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. High quality alloys and the latest in heat-treating technologies provide a strong axle for off-road, on the street or at the track.
235.08 USD
Alloy USA Dana 35 Rear Axle Shaft - 21137
84-89 Cherokee XJ;Replacement axle shaft;Dana 35;27 spline;5 on 4.5 inch bolt pattern;30.350 inches overall length;Driver side;Does NOT include bearings, seals or studs;Non c-clip;Non ABS; California Residents: WARNING Don't just replace your axle shafts, upgrade them. For less than the cost or an original replacement axle shaft you can upgrade to an Alloy USA performance shaft. Our axles are made from 1541H or 4140 steel depending on the application. Each axle is heat-treated and induction hardened to have twice the tensile strength than stock and is up to 35% stronger.
129.99 USD
Yukon Dana 30 4340 Chromoly Outer Stub - YAW39125
Fits Jeep Wrangler and Cherokee front with Dana Spicer 30;4340 Chromoly;Outer stub;27 spline;6.11 from end of splines to center of u-joint bore; California Residents: WARNING Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. High quality alloys and the latest in heat-treating technologies provide a strong axle for off-road, on the street or at the track.
185.80 USD
Alloy USA Dana 30 Front Inner Axle Shaft - 10124
97-06 Wrangler TJ/LJ;96-01 Cherokee XJ;Dana 30 Front;27 Spline; Driver Side;16.5in. Overall Length;For Use With 5-760X U Joint; California Residents: WARNING Don't just replace your axle shafts, upgrade them. For less than the cost or an original replacement axle shaft you can upgrade to an Alloy USA performance shaft. Our axles are made from 1541H or 4140 steel depending on the application. Each axle is heat-treated and induction hardened to have twice the tensile strength than stock and is up to 35% stronger.
159.99 USD
Ten Factory Dana 30 Front Axle Kit With ARB Locker - MG22132ARB
Ten Factory Jeep Front Axle Kit;Dana 30;30 Spline;For Use In 97-Up TJ;Includes ARB Air Locker;No Compressor Included; California Residents: WARNING Original equipment front axle shafts are designed for original equipment tire sizes and moderate off road use. When you upgrade your Jeep or 4x4, you need to upgrade your axle shafts. TEN Factory designs our front axle shafts to maximize strength and durability, and back them with an exclusive TEN-Year Replacement Warranty.
1805.99 USD
Alloy USA Dana 30 Front Inner Axle Shaft - 10113
87-06 Wrangler TJ/YJ;Dana 30 front;27 spline;Passenger side;32.31 inch overall length;For use with 5-760X u-joint; California Residents: WARNING Do not just replace your axle shafts, upgrade them. For less than the cost or an original replacement axle shaft you can upgrade to an Alloy USA performance shaft. Our axles are made from 1541H or 4140 steel depending on the application. Each axle is heat-treated and induction hardened to have twice the tensile strength than stock and is up to 35% stronger.
144.99 USD
Alloy USA Dana 30 Front Inner Axle Shaft - 10129
84-01 Cherokee XJ;87-06 Wrangler TJ/YJ;Dana 30 Front;30 Spline;Passenger Side;32.31in. Overall Length;For Use With 5-760X U Joint;Requires Aftermarket 30 Spline Differential; California Residents: WARNING Do not just replace your axle shafts, upgrade them. For less than the cost or an original replacement axle shaft you can upgrade to an Alloy USA performance shaft. Our axles are made from 1541H or 4140 steel depending on the application. Each axle is heat-treated and induction hardened to have twice the tensile strength than stock and is up to 35% stronger.
224.99 USD
Ten Factory Dana 30 Front Axle Kit - MG22142
Ten Factory Jeep Front Axle Kit;Dana 30;27 Spline;For Use In 82-86 CJ Wide Track;Uses 5-760X Joint; California Residents: WARNING Original equipment front axle shafts are designed for original equipment tire sizes and moderate off road use. When you upgrade your Jeep or 4x4, you need to upgrade your axle shafts. TEN Factory designs our front axle shafts to maximize strength and durability, and back them with an exclusive TEN-Year Replacement Warranty.
623.99 USD
Alloy USA Dana 44 Front Inner Axle Shaft - 10123
80-92 Jeep SJ Wagoneer;Dana 44 front axle;Right front inner axle;30 spline;32.12 inches long; California Residents: WARNING This 30 spline Dana 44 chromoly front right inner axle shaft from Alloy USA fits 80-92 Jeep SJ Wagoneer. 32.12 long.
202.99 USD
Yukon Gear & Axle Dana 30/44 Rubicon 4340 Chromoly Replacement Outer Stub Shaft - YAW39127
Fits Jeep JK Rubicon front;4340 Chromoly;Outer stub;32 spline;6.3 inch from end of splines to center of u-joint bore; California Residents: WARNING Yukon Gear & Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. High quality alloys and the latest in heat-treating technologies provide a strong axle for off-road, on the street or at the track.
186.53 USD
Alloy USA Dana 35 Rear Axle Shaft - 21148
Chromoly Replacement Axle Shaft;Dana 35;27 Spline;Passenger Side;Does NOT Include Bearings Seals Or Studs;For Use In 03-06 Jeep TJ With ABS Drum; California Residents: WARNING Don't just replace your axle shafts, upgrade them. For less than the cost or an original replacement axle shaft you can upgrade to an Alloy USA performance shaft. Our axles are made from 1541H or 4140 steel depending on the application. Each axle is heat-treated and induction hardened to have twice the tensile strength than stock and is up to 35% stronger.
149.99 USD
Yukon Dana 50/60 30 Spline 4340 Chromoly Outer Stub Axle - YAW46106
98-04 Ford F250/F350;Outer stub;9 3/8 long;30 spline; California Residents: WARNING Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. High quality alloys and the latest in heat-treating technologies provide a strong axle for off-road, on the street or at the track.
224.52 USD
Alloy USA Dana 44 Rear RH 30 Spline Replacement Axle Shaft - 21106
97-06 Wrangler TJ/LJ with a Dana 44 and without ABS;Passenger side;30 spline; California Residents: WARNING Do not just replace your axle shafts, upgrade them. For less than the cost or an original replacement axle shaft you can upgrade to an Alloy USA performance shaft. Our axles are made from 1541H or 4140 steel depending on the application. Each axle is heat-treated and induction hardened to have twice the tensile strength than stock and is up to 35% stronger.
171.19 USD
Ten Factory Chrysler 8.25 Inch Replacement Rear 29 Spline Axle Kit - MG31118
97-01 Cherokee XJ; 2 & 4WD;Ten Factory Replacement Jeep Rear Axle Shaft;Chrysler 8.25;29 Spline;5-Lug;29-3/4 Overall Length;Left or Right Hand Application;Kit includes: 1 axle, 1 bearing, 1 seal and 5 lug studs; California Residents: WARNING TEN Factory Replacement Axles are designed as direct replacements for original equipment axle shafts without modifications. OE axles are typically made from a low cost material and designed for average use. TEN Factory Replacement Axles are made from High Manganese 1541H material, allowing a deeper and harder heat treatment. This allows us to back them with a TEN-Year Replacement Warranty.
166.99 USD
Yukon Gear & Axle Chrysler 8.0 IFS Right Hand Inner Disconnect Axle, 29/16 Spline - YAC52114636AB
Chrysler 8.0 IFS, standard rotation; Right Hand; Chrysler 8.0IFS Inner Disconnect Stub Axle; For '06-'11 Ram 1500 Front; 16 Spline Outer, 29 Spline Inner; California Residents: WARNING Yukon Gear and Axle manufactures the highest quality and widest selection of performance axles in the market. Yukon uses the latest in heat treatment technology and high quality alloys to maintain our competitive edge. In-house engineering and quality labs ensure every axle is of the highest strength and standards for track racing, boulder climbing, desert racing, sled pulling, or whatever moves you forward. Yukon's 4340 chromoly axles are up to 37% stronger than other aftermarket axles and come with a lifetime warranty.
192.47 USD
Dana Spicer Front Axle Shaft - Dana 44 - 27902-65X
85-93 Dodge D500, D600 and D800;Dana 44;Passenger side;Front;Inner;30 spline;17.02 inches overall length;Accepts 5-760X U-Joint;Made in the USA; California Residents: WARNING These high quality O.E replacement axle shafts from Dana Spicer are available for most popular factory applications. These are the shafts that came in your vehicle from the factory so there is no question of poor fitment.
251.75 USD
Dana Spicer Front Axle Shaft - Dana 60 - 40955
77-90 GM 1 ton trucks;Passenger side;Outer;30 splines;12.00 inches overall length;Accepts 5-806X u-joint;Micro-alloy material improves strength of shaft;Statistically controlled heat treatment ensures proper hardness; California Residents: WARNING Dana Spicer Stub axles are available as an alternative to the high priced poor quality after market replacements. These shafts are available for most popular applications.
160.99 USD
Alloy USA Dana 35 Rear Axle Shaft - 21151
03-06 Wrangler TJ/LJ;Chromoly Replacement Axle Shaft;Dana 35;27 Spline;5 on 4.5in. Bolt Pattern;29.750in.Overall Length;Driver Side;Does NOT Include Bearings Seals Or Studs;With ABS Disc; California Residents: WARNING Don't just replace your axle shafts, upgrade them. For less than the cost or an original replacement axle shaft you can upgrade to an Alloy USA performance shaft. Our axles are made from 1541H or 4140 steel depending on the application. Each axle is heat-treated and induction hardened to have twice the tensile strength than stock and is up to 35% stronger.
149.99 USD
Yukon Ford 8.8 1541H Alloy Rear Axle (Right Hand Side) - YAF880007
87-96 Ford 8.8 in F150 ;87-05 Ford 8.8 in Vans ;Right hand side;31 spline;31 1/16 long;5 lug; California Residents: WARNING Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. High quality alloys and the latest in heat-treating technologies provide a strong axle for off-road, on the street or at the track.
241.11 USD
Crown Automotive AMC Model 20 J-10 Rear Passenger Side Axle Shaft - J3235808
80-86 J-10 Full Size;Passenger side shaft;32-1/8 long; California Residents: WARNING For over 50 years, Crown Automotive has been the leading manufacturer and distributor of replacement parts for Jeep vehicles. With over 8,000 different part numbers, including many factory-discontinued items, we offer you exceptional quality that is only matched by an exceptional warranty.
226.99 USD
G2 Dana 30 Chromalloy Inner Axle Shaft - 97-2032-008
82-86 CJ;G2 Axle and Gear Chromoly Inner Axle Shaft Dana 30;Dana 30;30 Spline;28.69 Overall Length;Accepts 5-760X U-Joint;Driver Side;Machined to Accept Full Circle Clips;For use in 82-86 Jeep CJ; California Residents: WARNING G2s high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
164.99 USD
Crown Automotive Dana 44 JK Rear Driver/Passenger Side Axle Shaft - 68003272AA
07-18 Wrangler JK, 2 & 4 Door;Driver or passenger side;With standard differential or Trac Loc;Anti-Spin Differential;Dana 44 Driver/Pass Axle Shaft;30 Spline;Includes retainer, bearing, seal & ring; 32 long from flange to end of shaft; California Residents: WARNING For over 50 years, Crown Automotive has been the leading manufacturer and distributor of replacement parts for Jeep vehicles. With over 8,000 different part numbers, including many factory-discontinued items, we offer you exceptional quality that is only matched by an exceptional warranty.
287.99 USD
Ten Factory Ford 8.8 InchReplacement Rear Axle - MG25114
Ten Factory Replacement Ford Rear Axle Shaft;Ford 8.8;31 Spline;5-Lug;27.62 Overall Length;Right Hand Application;For Use In 95-Up Explorer; California Residents: WARNING TEN Factory Replacement Axles are designed as direct replacements for original equipment axle shafts without modifications. OE axles are typically made from a low cost material and designed for average use. TEN Factory Replacement Axles are made from High Manganese 1541H material, allowing a deeper and harder heat treatment. This allows us to back them with a TEN-Year Replacement Warranty.
132.99 USD
RCV Axles Snap Ring for Dana 30 - 175-16RT
Internal snap ring for Dana 30 RCV axles; Standard round; Fits end of axle to engage into the CV race.; California Residents: WARNING RCV Performance Products specializes in industry leading quality parts for countless motorsports applications from Ultra4 race cars, desert cars, Pro4 trucks, to Jeeps, Toyotas, UTVs, and Rock Bouncers. At RCV, we use our engineering and manufacturing experience to develop and produce CV axles and other highperformance drive line components for the automotive, truck, and bus industries. Our main focus is on patented CV Axle conversions and replacement IFS axle shafts for the automotive off-road market. RCV provides off the shelf solutions as well as caters to custom application projects, and other large and small driveline projects as they come in the door.
5.95 USD
Alloy USA Dana 44 Rear Axle Shaft - 21147
72-75 CJ;Narrow Trac;Replacement Axle Shaft;Dana 44;30 Spline;5 on 5.5in. Bolt Pattern; 24.750in.Overall Length;Driver And Passenger Side;Does NOT Include Bearings Seals Or Studs; California Residents: WARNING Don't just replace your axle shafts, upgrade them. For less than the cost or an original replacement axle shaft you can upgrade to an Alloy USA performance shaft. Our axles are made from 1541H or 4140 steel depending on the application. Each axle is heat-treated and induction hardened to have twice the tensile strength than stock and is up to 35% stronger.
194.99 USD
Dana Spicer Rear Axle Shaft - Dana 80 - D/S45553-3
94-02 Dodge Ram 2500/3500;Driver or passenger side;Outer;35 splines;36.50 inches overall length;Accepts 5-806X u-joint;Micro-alloy material improves strength of shaft;Statistically controlled heat treatment ensures proper hardness; California Residents: WARNING These high quality O.E replacement axle shafts from Dana Spicer are available for most popular factory applications. These are the shafts that came in your vehicle from the factory so there is no question of poor fitment.
297.75 USD
Alloy USA Front Inner Axle Shaft - 10138
07-14 Wrangler JK, 2 & 4 Door;Rubicon models;30 Spline;Chromoly;Dana 44;Front left inner axle; California Residents: WARNING This 30 spline chromoly front left inner axle shaft from Alloy USA fits Dana 44 axles found in 08-18 Jeep Wrangler JK/JKU Rubicon
199.99 USD