RockJock Antirock Front Sway Bar Kit - CE-9900JKFSA
07-18 Wrangler JK, 2 & 4 Door;Includes Aluminum Arms;Provides balanced performance of front and rear suspension;Bar is made of SAE 4130 heat treated steel for ultimate strength;Includes all components for installation;Includes steel frame brackets; California Residents: WARNING The RockJock Antirock Sway Bar Kit provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight over all four tires. The Anitrock Off Road Sway Bar is designed to replace the stock Jeep sway bar. The Sway Bar is made of SAE 4130 Heat-treated steel for ultimate strength. This is the same quality used in professional off-road competition.
628.00 USD
RockJock Antirock Rear Sway Bar Kit - CE-9900JKR
07-18 Wrangler JK, 2-Door;Provides balanced performance of front and rear suspension;Designed to directly replace the stock Jeep sway bar;Bar is made of SAE 4130 heat treated steel;Kit includes all components for installation;Semi-gloss black powder coat bolt-on steel frame brackets;Bolts into existing holes in the bottom of the frame rail and attaches to the stock mounts; California Residents: WARNING The RockJock Antirock rear sway bar kit, when used in conjunction with a front Antirock sway bar kit, provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, semi-gloss black powder coated bolt-on steel frame brackets, delron bushings, semi-gloss black powder coated arms, adjustable length heim jointed sway bar links, long travel stainless braided brake lines that relocate the brake line inboard of the frame for sway bar arm clearance, necessary hardware, and step-by-step instructions. Unit bolts into existing holes in the bottom of the frame rail and attaches to the stock mounts on the vehicles axle housing. The RockJock Antirock sway bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street, however, it will not provide the same handling characteristics as the stock setup.
641.00 USD
RockJock Antirock Front Sway Bar Kit - CE-9900JKFA
07-18 Wrangler JK, 2 & 4 Door;Billet aluminum frame brackets;Increases traction and balance;Sway bar is made of SAE 4130 heat treated steel for ultimate strength;Provides balanced performance of front and rear suspension;Includes all components for installation; California Residents: WARNING For all models of the 07 and up Jeep JK Wranglers - 2 or 4 door. The RockJock Antirock sway bar kit provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, bolt-on billet aluminum frame brackets which feature the RJ logo milled into the sides of them and semi-gloss black powder coat finish, delron bushings, semi-gloss black powder coated arms, adjustable length heim jointed sway bar links, necessary hardware, and step-by-step instructions. Unit bolts into existing holes in the bottom of the frame rail and attaches to the stock mounts on the vehicles axle housing. The RockJock Antirock sway bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street, however, it will not provide the same handling characteristics as the stock setup.
596.00 USD
RockJock Universal Antirock Sway Bar Kit, 45 Inch Bar with 24 Inch Aluminum Arms - CE-9902A-24
Universal Antirock sway bar kit;Features 45 inch torsion bar length;24 inch long aluminum arms;24 inch long, 1/2 x .20 LH/RH threaded rods that can be cut down to desired length;1/2 x 20 threaded heim joint rod ends and jam nuts;Fabrication required; California Residents: WARNING RockJock's Antirock sway bar kits are available in a universal fit configurationfor those building their own custom rigs and rock buggies. This universal kit features a 45 torsion bar length and 20 long billet aluminum arms. Vertical links use a 24 long 1/2 x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2 x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75 x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the delrin bushings to support the bar in the tube. The 45 bar is a .800 diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
650.00 USD
RockJock Front Antirock Sway Bar Kit (Steel Arms) - CE-9900JLF
Complete bolt-on installation;4130 heat treated chromoly sway bar;Billet aluminum bolt-on frame brackets (Semi-gloss black powder coat);Steel offset sway bar arms (Semi-gloss black powder coat);Delrin sway bar bushings;Adjustable length heim jointed sway bar links;All necessary hardware, and step-by-step instructions; California Residents: WARNING Fits all models of 2018 and newer Jeep JL Wranglers - 2 or 4 door. The RockJock Antirock sway bar helps free up suspension articulation to increase off-road traction. The Antirock sway bar is designed to directly replace the vehicles stock front sway bar and does not require disconnecting for off-road use. Sway bar is made of 4130 heat treated chromoly for ultimate strength, which is the same quality used in professional off-road competition sway bars.
567.00 USD
RockJock 4x4 Rear Antirock Sway Bar Kit - 256200-101
Fits JT Gladiator;Rear sway bar kit;Bolt on design;Kit includes: 4130 heat treated chromoly sway bar;Laser cut and fabricated bolt-on frame brackets (Semi-gloss black powder coat);Heavy duty adjustable length heim jointed sway bar links;Laser cut and fabricated bolt-on differential brackets (Semi-gloss black powder coat);Forged chromoly offset sway bar arms (Semi-gloss black powder coat);UHMW sway bar bushings;Adjustable length heim jointed sway bar links;All necessary hardware, and step-by-step instructions;Sway bar mounts bolt into existing holes in the sides of the frame rails and links attach to the new bolt-on differential mounts supplied in the kit;Notes: Antirock sway bar equipped vehicles will exhibit more body roll than vehicles equipped with the stock sway bar. Antirock sway bars may be used on the street, however, they do not provide the same handling characteristics as the stock sway bar;This kit will fit on all models of the Jeep JT Gladiator. Minor inner fender liner trimming is necessary.; California Residents: WARNING The Antirock sway bar helps free up suspension articulation to increase off-road traction. The Antirock sway bar is designed to directly replace the vehicle's stock rear sway bar and does not require disconnecting for off-road use. The sway bar is made of 4130 heat treated chromoly for ultimate strength, which is the same quality used in professional off-road competition sway bars
1190.00 USD
RockJock Antirock Front Sway Bar Kit (Aluminum Arms) - CE-9900JLFA
Front sway bar system;4130 heat treated chromoly sway bar;Billet aluminum bolt-on frame brackets (Semi-gloss black powder coat);Aluminum offset sway bar arms (Brushed finish);Delrin sway bar bushings;Adjustable length heim jointed sway bar links;All necessary hardware, and step-by-step instructions;Sway bar mounts bolt into existing holes in the bottom of the frame rail and links attach to the stock mounts on the vehicle's axle housing;Notes: Body Roll - Antirock sway bar equipped vehicles will exhibit more body roll than vehicles equipped with the stock sway bar. Antirock sway bars may be used on the street, however, they do not provide the same handling characteristics as the stock sway bar;Rubicon Models - Jeep JL Rubicon models equipped with the electronic sway bar, will require the use of a tuner (AEV ProCal or equivalent) to turn off the sway bar dash light when the factory sway bar is removed; California Residents: WARNING RockJock's Antirock front sway bar kit for 2018 and Up Jeep JL Wranglers and JT Gladiators provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, steel arms, bushings, hardware, and step-by-step instructions. The billet aluminum sway bar mounting brackets bolt into the factory sway bar mounting holes under the front frame rails and the sway bar links attach to the stock mounts on the differential housing. The RockJock Antirock sway bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock sway bar.
629.00 USD
RockJock Universal Antirock Kit - CE-9902-18
45 torsion bar length;18 long fabricated steel arms;Vertical links use a 14 long 1/2 x .20 RH/LH threaded rod ;1/2 x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied;Universal weld-in 1.75 x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length is included;Delron bushings to support the bar in the tube also included;45 bar is a .800 diameter;Requires fabricating for installation -- these are NOT bolt-on kits; California Residents: WARNING RockJock Antirock sway bar kits are available in a universal form, for those building their own custom rigs and rock buggys. This universal kit features a 45 torsion bar length and 18 long fabricated steel arms. Vertical links use a 14 long 1/2 x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2 x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75 x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to support the bar in the tube. The 45 bar is a .800 diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
550.00 USD
RockJock Antirock Front Sway Bar System - CE-9900JKF
07-18 Wrangler JK, 2 & 4 Door;Front sway bar;Includes steel frame brackets;Increases traction and balance;SAE 4130 heat treated steel;Includes all components for installation;Does not need to be disconnected for off-road use; California Residents: WARNING The RockJock Enterprises Antirock sway bar kit provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, semi-gloss black powder coated bolt-on steel frame brackets, delron bushings, semi-gloss black powder coated arms, adjustable length heim jointed sway bar links, necessary hardware, and step-by-step instructions. Unit bolts into existing holes in the bottom of the frame rail and attaches to the stock mounts on the vehicles axle housing. The RockJock Enterprises Antirock sway bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street, however, it will not provide the same performance as the stock setup.
553.00 USD
RockJock Universal Antirock Sway Bar Kit - CE-9907-20
Universal Antirock sway bar kit;Features 39.5 torsion bar length;20 long steel arms;14 long, 1/2 x .20 LH/RH threaded rods that can be cut down to desired length;1/2 x 20 threaded heim joint rod ends and jam nuts;Fabrication required; California Residents: WARNING RockJock's Antirock sway bar kits are available in a universal fit configurationfor those building their own custom rigs and rock buggies. This universal kit features a 39 1/2 torsion bar length and 20 long steel arms. Vertical links use a 14 long 1/2 x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2 x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75 x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the delrin bushings to support the bar in the tube. The 39 1/2 bar is a 1 diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
550.00 USD
RockJock Antirock Rear Sway Bar Kit - CE-9900JKRA
07-18 Wrangler JK, 2-Door;Includes Aluminum Arms;Semi-gloss black powder coat bolt-on steel frame brackets;Bar is made of SAE 4130 heat treated steel for ultimate strength;Includes all components for installation; California Residents: WARNING The RockJock Antirock Sway Bar Kit provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight over all four tires. The Anitrock Off Road Sway Bar is designed to replace the stock Jeep sway bar. The Sway Bar is made of SAE 4130 Heat-treated steel for ultimate strength. This is the same quality used in professional off-road competition.
693.00 USD
RockJock Universal Antirock Sway Bar Kit, 42 Inch Bar with 20 Inch Bent Aluminum Arms - CE-9903A-20B
Universal Antirock sway bar kit;Features 42 inch torsion bar length;20 inch long bent aluminum arms;14 inch long, 1/2 x .20 LH/RH threaded rods that can be cut down to desired length;1/2 x 20 threaded heim joint rod ends and jam nuts;Fabrication required; California Residents: WARNING RockJock's Antirock sway bar kits are available in a universal fit configurationfor those building their own custom rigs and rock buggies. This universal kit features a 32 torsion bar length and bent 20 long billet aluminum arms. Vertical links use a 14 long 1/2 x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2 x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75 x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the delrin bushings to support the bar in the tube. The 32 bar is a .700 diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
639.00 USD
RockJock Antirock Front Aluminum Sway Bar System - CE-9900A
97-06 Wrangler TJ/LJ;Front sway bar;Provides balanced performance of front and rear suspension;Light weight aluminum arms;Increases traction and balance;SAE 4130 heat treated steel; California Residents: WARNING The RockJock Antirock Sway Bar Kit with aluminum arm option provides balanced performance of front and rear suspension for rugged off-road conditions as well as a light weight, trick looking aluminum arms. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock Off Road Sway Bar is designed to directly replace the stock Jeep sway bar and is an easy bolt on installation. The sway bar is made of SAE 4130 Heat-treated steel for ultimate strength. This is the same quality used in professional off-road competition sway bars. The RockJock Antirock Sway Bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock setup.
563.00 USD
Dorman Rear Sway Bar Kit - 927-164
97-06 Wrangler TJ/LJ;Rear;15.3mm diameter;Includes sway bar, bushings and brackets; California Residents: WARNING Re-engineered with a solid forged design that eliminates the possibility of the ends breaking due to corrosion, Dormans Suspension Stabilizer Bar offers top- notch durability. it is also a great value.
155.99 USD
RockJock Antirock Arm Hardware Pack - CE-99005A
Antirock sway bar arm hardware kit;Includes tapered aluminum washers and flat head allen bolts;For all styles of Antirock arms; California Residents: WARNING Hardware pack for Antirock sway bar arms includes the tapered aluminum washers and the flat head allen bolts that thread into the end of the bar to retain the arms onto the sway bar as well as the 3/8 grade 8 bolts and nylock nuts that clamp the side arms to the sway bar. This hardware kit works for all styles of Antirock arms that are included in any Antirock kit.
19.95 USD
RockJock 4x4 Antirock Double Shear End Link Bracket Kit - 201000-101
Used with any Antirock sway bar arms that have multiple mounting holes;Allows an additional 1.5 inch length to arms and 1.25 inch offset;Hardware included; California Residents: WARNING The RockJock Double Shear End Link Bracket Kit can be used in conjunction with any of our Antirock sway bar arms that have multiple holes or have room for at least 2 holes at the end. On arms that only have one hole, you can drill the addtional hole to allow for installation. This kit allows you to add 1.5 in. in length to your Antirock arms, as well as allowing you the ability to vary the offset of the Antirock end link up to 1.25 inches inboard or outboard of the Antirock arm.
150.00 USD
RockJock Universal Antirock Sway Bar Kit, 50 x 1 Inch Bar with 18 Inch Aluminum Arms - CE-9906A-18
Universal Antirock sway bar kit;Features 50 inch torsion bar length;18 inch long aluminum arms;14 inch long, 1/2 x .20 LH/RH threaded rods that can be cut down to desired length;1/2 x 20 threaded heim joint rod ends and jam nuts;Fabrication required; California Residents: WARNING RockJock's Antirock sway bar kits are available in a universal fit configurationfor those building their own custom rigs and rock buggies. This universal kit features a 50 torsion bar length and 18 long billet aluminum arms. Vertical links use a 14 long 1/2 x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2 x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75 x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the delrin bushings to support the bar in the tube. The 50 bar is a 1 diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
650.00 USD
RockJock Antirock Sway Bar Kit - CE-9905-21
Antirock Sway Bar Kit;Universal; California Residents: WARNING RockJock now offers Antirock sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 50 torsion bar length and 21 long steel arms as used in our 2-door JK rear applications. Vertical links use a 14 long 1/2 x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2 x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75 x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to support the bar in the tube. The 50 bar is a .900 diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
550.00 USD
RockJock Antirock Front Sway Bar Kit - CE-9900
97-06 Wrangler TJ/LJ;Front sway bar kit;SAE 4130 heat treated steel;Includes all necessary components;Bushings and hardware included;Step by step installation instructions;CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock setup; California Residents: WARNING The RockJock Antirock Sway Bar Kit provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight over all four tires. The Antirock Off Road Sway Bar is designed to replace the stock Jeep sway bar. The Sway Bar is made of SAE 4130 Heat-treated steel for ultimate strength. This is the same quality used in professional off-road competition. This kit includes all components, bushings, hardware and step-by-step instructions. It is positioned through the front cross member and attaches to the stock mounts on the axle housing on Jeep TJs. The RockJock Antirock Sway Bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This Sway Bar may be used on the street however, it will not provide the same performance as the stock setup.
471.00 USD
ARB Sway Bar Kit - OMESTAB1
Sway Bar Kit;Front; California Residents: WARNING ARB 4x4 Accessories Coil Spring, Set of 2 OMESTAB1
333.00 USD
RockJock Antirock Front Sway Bar System - CE-9900XJF
84-01 XJ Cherokee;86-92 MJ Comanche;Splined torsion style sway bar;Semi-gloss black powdercoated billet aluminum brackets;Powder coated 4140 forged chromoly arms;Adjustable length heim jointed links;Mounting hardware; California Residents: WARNING RockJock's Antirock front sway bar kit for 1987-2001 Jeep XJ Cherokees and 1986-1992 Jeep MJ Comanches provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, steel arms, billet aluminum sway bar mounting brackets, bushings, hardware, and step-by-step instructions. The billet aluminum sway bar mounting brackets bolt into the factory sway bar mounting holes under the front frame rails and the sway bar links attach to the stock mounts on the differential housing. The RockJock Antirock sway bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock sway bar.
616.00 USD
RockJock Front Antirock Sway Bar Kit - CE-9900JKFAA
07-18 Wrangler JK, 2 & 4 Door;Includes Aluminum Arms and Aluminum frame brackets;Provides balanced performance of front and rear suspension;Bar is made of SAE 4130 heat treated steel for ultimate strength;Includes all components for installation; California Residents: WARNING The RockJock Antirock Sway Bar Kit provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight over all four tires. The Anitrock Off Road Sway Bar is designed to replace the stock Jeep sway bar. The Sway Bar is made of SAE 4130 Heat-treated steel for ultimate strength. This is the same quality used in professional off-road competition.
683.00 USD
Fabtech Sway Bar Kit - FTS95003
Nissan Titan;Sway Bar Kit;6 in. Lift; California Residents: WARNING Factory style replacement part.
87.74 USD
RockJock Antirock Rear Sway Bar Kit with Aluminum Arms - CE-9900JLR4A
Wrangler JL, 2 & 4 Door;Rear sway bar system;4130 heat treated chromoly sway bar;Aluminum sway bar arms (Brushed finish);Delrin sway bar bushings (Frame inserts);Adjustable length heim jointed sway bar links;All necessary hardware, and step-by-step instructions;Sway bar mounts into existing hole in the side of the frame rail and links attach to the stock mounts on the vehicle's axle housing;Note: The vehicle will have more body roll than stock. This sway bar may be used on the street, however, it will not provide the same handling characteristics as the stock sway bar; California Residents: WARNING RockJock's Antirock rear sway bar kit for 2018 and Up Jeep JL Wranglers, when used in conjunction with a front Antirock sway bar kit, provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, semi-gloss black powder coated bolt-on steel frame brackets, delron frame bushings, billet aluminum arms, adjustable length heim jointed sway bar links, long travel stainless braided brake lines that relocate the brake line inboard of the frame for sway bar arm clearance, necessary hardware, and step-by-step instructions. Unit mounts into frame crossmember in front of the axle and attaches to the stock mounts on the vehicle's axle housing. TheRockJock Antirock sway bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street, however, it will not provide the same handling characteristics as the stock setup.
629.00 USD
RockJock Antirock Front Sway Bar Kit - CE-9900YJF
87-95 Wrangler YJ;Provides balanced performance of front and rear suspension;Designed to directly replace the stock Jeep sway bar;Bar is made of SAE 4130 heat treated steel for ultimate strength;Includes all components for installation; California Residents: WARNING The RockJock Antirock Sway Bar Kit provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight over all four tires. The Anitrock Off Road Sway Bar is designed to replace the stock Jeep sway bar. The Sway Bar is made of SAE 4130 Heat-treated steel for ultimate strength. This is the same quality used in professional off-road competition.
488.00 USD
RockJock Antirock Rear Sway Bar Kit - CE-9900JKR4A
07-18 Wrangler JK, 4-Door;Includes Aluminum Arms;Provides balanced performance of front and rear suspension;Designed to directly replace the stock Jeep sway bar;Bar is made of SAE 4130 heat treated steel;Kit includes all components for installation;Semi-gloss black powder coat bolt-on steel frame brackets;Bolts into existing holes in the bottom of the frame rail and attaches to the stock mounts; California Residents: WARNING For all 4 door models of the '07 and up Jeep JK Wranglers. The RockJock Antirock rear sway bar kit, when used in conjunction with a front Antirock sway bar kit, provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, semi-gloss black powder coated bolt-on steel frame brackets, delron bushings, billet aluminum arms, adjustable length heim jointed sway bar links, long travel stainless braided brake lines that relocate the brake line inboard of the frame for sway bar arm clearance, necessary hardware, and step-by-step instructions. Unit bolts into existing holes in the bottom of the frame rail and attaches to the stock mounts on the vehicle's axle housing. The RockJock Antirock sway bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street, however, it will not provide the same handling characteristics as the stock setup.
693.00 USD
RockJock Antirock Rear Sway Bar System - CE-9900TJR
97-06 Wrangler TJ/LJ;Black powder coat;Bolt on frame bracket;Requires the minor welding of the housing tabs;Adjustable heim joints;45 sway bar;Semi-gloss black powder coat bolt on frame brackets; California Residents: WARNING This is the complete TJ/LJ bolt on rear Antirock sway bar kit. Kit is completely bolt on and includes all necessary hardware with the exception of the housing tabs which require welding to affix them to the housing. Kit includes the 44 sway bar, semi-gloss black powder coated bolt on frame brackets, sway bar bushings, adjustable heim jointed sway bar links, weld on housing tabs, and all necessary hardware. Detailed instructions included. Requires the minor welding of the housing tabs, and trimming of the rear inner wheel wells for sway bar arm travel. Sold as a kit.
563.00 USD
Rubicon Express Heavy-Duty Rear Sway Bar - RE1700
07-18 Wrangler JK, 2 & 4 Door;Rear sway bar;3 point adjustable featuring 25-55% stiffer than OE sway bar;Less body roll and improved safety for lifted vehicles;Manufactured from high tensile cold formed steel;22MM (rear) fits all models;Tempered and shot peened, finished in powder coat for a long-lasting corrosion resistance;Mounting brackets and bushings included;Bolt-on installation; California Residents: WARNING The new JK HD Sway Bar increases the rate of suspension to more evenly distribute weight to all four wheels, reducing body roll while increasing cornering grip to give bettering handling, making for a safer ride on heavily equipped and lifted JKs. This is a 3 point adjustable sway bar for Jeep JK to allow for 25-55% stiffer settings than OE sway bar setting.
199.99 USD
RockJock Antirock Rear Sway Bar Kit - RJ-256200-101
20-Current Gladiator JT;4130 heat treated chromoly sway bar;Laser cut and fabricated bolt-on frame brackets (Semi-gloss black powder coat); Heavy duty adjustable length heim jointed sway bar links;Laser cut and fabricated bolt-on differential brackets (Semi-gloss black powder coat);Forged chromoly offset sway bar arms (Semi-gloss black powder coat);UHMW sway bar bushings;Adjustable length heim jointed sway bar links;All necessary hardware, and step-by-step instructions; California Residents: WARNING The Antirock sway bar helps free up suspension articulation to increase off-road traction. The Antirock sway bar is designed to directly replace the vehicle's stock rear sway bar and does not require disconnecting for off-road use. The sway bar is made of 4130 heat treated chromoly for ultimate strength, which is the same quality used in professional off-road competition sway bars. Notes: Body Roll - Antirock sway bar equipped vehicles will exhibit more body roll than vehicles equipped with the stock sway bar. Antirock sway bars may be used on the street, however, they do not provide the same handling characteristics as the stock sway bar. Models - This kit will fit on all models of the Jeep JT Gladiator. Minor inner fender liner trimming is necessary.
1190.00 USD
RockJock Antirock Rear Sway Bar Kit - CE-9900JKR4
07-18 Wrangler JK, 4-Door;Rear sway bar;Increases traction and balance;SAE 4130 heat treated steel;Includes Aluminum Arms;Provides balanced performance of front and rear suspension;Includes all components for installation; California Residents: WARNING For all 4 door models of the 07 and up Jeep JK Wranglers. The RockJock Enterprises Antirock rear sway bar kit, when used in conjunction with a front Antirock sway bar kit, provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, semi-gloss black powder coated bolt-on steel frame brackets, delron bushings, semi-gloss black powder coated arms, adjustable length heim jointed sway bar links, necessary hardware, and step-by-step instructions. Unit bolts into existing holes in the bottom of the frame rail and attaches to the stock mounts on the vehicles axle housing. The RockJock Enterprises Antirock sway bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street, however, it will not provide the same performance as the stock setup.
641.00 USD
RockJock Universal Antirock Sway Bar Kit, 50 x 1 Inch Bar with 20 Inch Steel Arms - CE-9906-20
Universal Antirock sway bar kit;Features 50 inch torsion bar length;20 inch long steel arms;14 inch long, 1/2 x .20 LH/RH threaded rods that can be cut down to desired length;1/2 x 20 threaded heim joint rod ends and jam nuts;Fabrication required; California Residents: WARNING RockJock's Antirock sway bar kits are available in a universal fit configurationfor those building their own custom rigs and rock buggies. This universal kit features a 50 torsion bar length and 20 long steel arms. Vertical links use a 14 long 1/2 x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2 x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75 x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the delrin bushings to support the bar in the tube. The 50 bar is a 1 diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
550.00 USD