RockJock Narrow 2.5 Inch Weld-On Johnny Joint Rod End, 2.365 x 0.5625 Ball - CE-9110NP-14
Body type: weld-on;Body series: 2.5 inch OD, narrow body;Body width: 1.685 inches;Mount width: 2.365 inches;Hole diameter: .5625 inch (9/16, 14mm);Misalignment: 42 degress total;Lubrication method: external zerk fitting located on joint body;Sold individually; California Residents: WARNING RockJock's narrow style weld-on Johnny Joints for fabricators and suspension system builders offer up to 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The narrow style outer shell is weldable .180 wall machined DOM tubing that is fitted with a zerk fitting for greasing. This specific joint is a 2 1/2 o.d. and features a 2.365 mounting width and a .5625 thru bolt hole.
56.00 USD
RockJock Narrow 2.0 Inch Forged Johnny Joint with 1 Inch RH Threaded Stud - CE-9112N-13
Johnny Joint;Narrow Body;Externally Greased;w/o Bolt;Each; California Residents: WARNING The all new narrow 2 forged Johnny Joint rod end was designed originally for use in our JK front and rear trac bars, however, it is now available separately as a replacement part or for use in any type of universal application for custom builders. This joint is a male rod end style forging that accepts Johnny Joint internals that are unique to this narrow joint. This version features a 14mm thru bolt hole, a 1.600 mounting width, 2 1/4 of 1-14 right hand threads on the shank, and is greaseable through the outer shell. We also keep the jam nuts for these units on hand at all times as well - see CE-9113JN. Finished in gold zinc plating.
60.00 USD
RockJock Johnny Joint - CE-9110-15
Johnny Joint;Internally Greased;w/ 15 Ball Cross Drilled;0.570 Hole X 2.368 Oaw Offset; California Residents: WARNING RockJock Enterprises Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. Johnny Joint rod ends are made with a high density polyurethane bushing that encases a spherical ball and include a zerk for easy lubrication.
63.00 USD
RockJock 2 Inch Forged Johnny Joint with 3/4 Inch RH Threaded Stud - CE-9112S
Johnny Joint Rod End;Externally Greased;w/ Greasable Bolt;Each; California Residents: WARNING All new from RockJock, forged Johnny Joints!!! We have taken the Johnny Joint to the next level by making a male rod end style forging that accepts the Johnny Joint internals from our CE-9112 2 Johnny Joints. This version features a 7/16 thru bolt hole, a 2 mounting width, 2 1/4 of 3/4-16 right hand threads on the shank, and is greaseable through the outer shell. Units will also accept our 7/16 greaseable thru bolts as well (available separately). We also keep the jam nuts for these units on hand at all times as well. These can be used in any RockJock adjustable upper control arm, as well as in any type of universal application for those building their own arms. Finished in gold zinc plating, sold each.
73.00 USD
Rock Krawler Krawler Joint, 1.25 Inch Shank - RK05067
Corrosion resistant zinc coating;Fully machined Chromoly joint housing;12 TPI;Right hand thread;0.625 bolt bore;2.625 mounting width;Sold individually;Jam nuts sold separately;Made in the U.S.A; California Residents: WARNING The Pro Krawler Joint is a revolutionary joint manufactured with the tightest tolerances for ultimate consistency. The Chromoly joint housings are heat treated for increased strength and then zinc plated for corrosion resistance. The hard chrome plated inner ball is machined from billet 52100 steel for strength and durability. The inner raceway provides wear resistance, high frequency vibration isolation and durability. The body and clevis mounting width ratio of the Pro Krawler Joint is a key design feature which provides up to +/-30 degrees of misalignment. that is a total of 60 degrees of misalignment per side.
67.99 USD
Rubicon Express Heavy-Duty Super-Flex Joint Assembly - RE3794
Universal builder part;5/8 inch hardware;Welding required; California Residents: WARNING This kit features an extra thick threaded insert for adjustment and rebuilding. UHMW-PE races for superior impact resistance and anti-friction properties with a precision machined end right that eliminates the use of the snap-ring and washer found in the RE3791 and RE3792 Super Flex assemblies. Features 32 degrees of mis-alignment.
56.99 USD
Currie Narrow 2 Forged Johnny Joint (.5625 Bolt Hole) - CE-9112N75L-13
3/4 left hand thread;Gold zinc plating;.5625 thru bolt hole;1.600 mounting width;Greasable; California Residents: WARNING The all new narrow 2 forged Johnny Joint is a male rod end style forging that accepts Johnny Joint internals that are unique to this narrow joint and may be used in any type of universal application for custom builders. This version features a .5625 thru bolt hole, a 1.600 mounting width, 2-1/4 of 3/4-16 left hand threads on the shank, and is greasable through the outer shell. They also keep the jam nuts for these units on hand at all times as well - see part number CE-9112JN. Finished in gold zinc plating.
57.00 USD
RockJock Johnny Joint Rod End - CE-9110CP
Johnny Joint Rod End;w/ Chromoly Barrel-Externally Greased; California Residents: WARNING RockJock Enterprises Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. Johnny Joint rod ends are made with a high density polyurethane bushing that encases a spherical ball and include a zerk for easy lubrication.
63.00 USD
RockJock Narrow Johnny Joint Rebuild Kit - CE-9110NRK
Narrow Johnny Joint Rebuild Kit; California Residents: WARNING Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
16.00 USD
Rock Krawler Small Joint Retainer - RK04031
3/4 inch and 7/8 inch Krawler Joints;Corrosion resistant zinc coating;Steel construction;Fits 2 inch outside diameter joint housing;Sold As A Pair;Made in the U.S.A; California Residents: WARNING With Rock Krawler Suspensions Small Joint Retainer you can easily rebuild or repair your Krawler Joints. The removal and installation of the Small joint retainer requires the purchase of the RK04487 Small Joint Socket Tool.
9.73 USD
RockJock Narrow 2 Forged Johnny Joint - CE-9112NL-20
Body Type: Forged Steel (Threaded);Body Series: 2 OD, Narrow Body;Body Width: 1.2;Thread Size: 1 inch, 14 TPI;Thread Direction: Left hand;Shank Length: 2 1/4;Mount Width: 1.750;Hole Diameter: .500 (1/2);Misalignment: 30 degree total;Lubrication Method: External zerk fitting located on joint body;Body Finish: Yellow zinc plating; California Residents: WARNING This narrow 2 forged Johnny Joint rod end features a 1/2 thru bolt hole, a 1.750 mounting width, 2 1/4 of 1-14 left hand threads on the shank and is greasable through the outer shell. We also keep the jam nuts for these units on hand at all times as well. Finished in gold zinc plating.
60.00 USD
RockJock Forged Johnny Joint - CE-9113L-19
Forged Johnny Joint(R); California Residents: WARNING The forged Jonny Joint is available for the custom suspension builder that needs a high angle joint that does not transmit road noise and clunk. The Johnny Joint is 100% rebuildable and field serviceable.
60.00 USD
RockJock 2.5 Inch Forged Johnny Joint with 1 Inch RH Threaded Stud - CE-9113-14
Johnny Joint;1 in-14 RH Threaded Shank;Externally Greased;w/o Bolt;Each;For Use On JK Rear Upper Arm; California Residents: WARNING All new from RockJock, forged Johnny Joints!!! We have taken the Johnny Joint to the next level by making a male rod end style forging that accepts the Johnny Joint internals from our CE-9112 2 Johnny Joints. This version features a 7/16 thru bolt hole, a 2 mounting width, 2 1/4 of 3/4-16 right hand threads on the shank, and is greaseable through the outer shell. Units will also accept our 7/16 greaseable thru bolts as well (available separately). We also keep the jam nuts for these units on hand at all times as well. These can be used in any RockJock adjustable upper control arm, as well as in any type of universal application for those building their own arms. Finished in gold zinc plating, sold each.
60.00 USD
RockJock Forged Johnny Joint - CE-9114L-25
Forged Johnny Joint; 2 1/2 in.; 2.365 in. x 0.484 in. Ball; 1 1/4 in.-12 LH Threaded Shank; Externally greased;Sold individually; California Residents: WARNING RockJock's forged Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 1 1/4-12 left hand threads on the shank, and a 2.365 mounting width ball with a .484 thru bolt hole. Finished in gold zinc plating.
60.00 USD
RockJock 2 Serviceable Johnny Joint - CE-9112NC-12
Narrow 2 inch;5 inch of 1 inch right hand thread;2 inch x .50 ball;Forged; California Residents: WARNING The 2 narrow forged Johnny Joint rod end was designed originally for use in our JK front and rear trac bars, however, it is now available separately as a replacement part or for use in any type of universal application for custom builders. This joint is a male rod end style forging that accepts Johnny Joint internals that are unique to this narrow joint. This version features a 1/2 thru bolt hole, a 2 mounting width, 5 of 1-14 right hand threads on the shank, and is greaseable through the outer shell. We also keep the jam nuts for these units on hand at all times as well - see CE-9113JN. Finished in gold zinc plating.
65.00 USD
RockJock 2.5 Inch Johnny Joint - CE-9110
2 1/2 inch Johnny Joint Rod End - Internally Greased, W/ Hardware;Universal Fit;Urethane Bushings;Internally Greased Via Supplied Greasable Bolt;Must Be Welded On;Fully Rebuilda; California Residents: WARNING For fabricators and suspension system builders. RockJocks Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made with a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, and is impervious to weather. The special center ball is heat-treated steel for extra strength, cross-drilled for thru-bolt lubrication, features a 9/16 thru bolt hole, and a 2 5/8 mounting width. The outer shell is .180 DOM tubing, and the retaining washers are heat-treated steel. 9/16 greaseable bolt with nut and washers included. Sold each.
63.00 USD
RockJock Narrow Forged Johnny Joint - CE-9112N75-14
Narrow Forged Johnny Joint; California Residents: WARNING Narrow style forged Johnny Joint rod ends feature 40 degrees of overall articulation travel! A RockJock exclusive!
60.00 USD
Mountain Off Road Enterprises Rod End - XMR12
Universal application;3/4 inch-16 right-hand thread;3/4 inch ball diameter;Sold individually; California Residents: WARNING Want to build your own tie rods, track bars, radius arms or link bars, and need the rod ends to perform the task? M.O.R.E has the most popular sizes in right and left threads. All rod ends have the same diameter hole in the ball as the shank on the threads on the body. These are race-car quality, 52100 bearing steel ball, Teflon/Kevlar self-lubricating race, and have a alloy steel heat-treated body. They come with a jam nut.
45.99 USD
RockJock 2.5 Inch Weld-On Johnny Joint Rod End, 2.625 x 0.640 Ball - CE-9110P-26
Body type: weld-on;Body series: 2.5 inch OD, standard body;Body width: 2 inches;Mount width: 2.625 inches;Hole diameter: .640 inch (5/8 or 16mm);Misalignment: 31 degress total;Lubrication method: external zerk fitting located on joint body;Sold individually; California Residents: WARNING RockJock's weld-on Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 wall machined DOM tubing that is fitted with a zerk fitting for greasing. This specific joint is a 2 1/2 o.d. and features a 2.625 mounting width and a .640 thru bolt hole.
53.20 USD
Rock Krawler Krawler Joint, 3/4 Inch Shank - RK02602L
Universal fitment;Corrosion resistant zinc coating;Fully machined Chromoly joint housing;16 TPI;Left hand thread;10 MM bolt bore;1.95 mounting width;Sold individually;Jam nuts sold separately;Made in the U.S.A; California Residents: WARNING The Pro Krawler Joint is a revolutionary joint manufactured with the tightest tolerances for ultimate consistency. The Chromoly joint housings are heat treated for increased strength and then zinc plated for corrosion resistance. The hard chrome plated inner ball is machined from billet 52100 steel for strength and durability. The inner raceway provides wear resistance, high frequency vibration isolation and durability. The body and clevis mounting width ratio of the Pro Krawler Joint is a key design feature which provides up to +/-30 degrees of misalignment. that is a total of 60 degrees of misalignment per side.
46.44 USD
RockJock Johnny Joint Rod End - CE-9110P-20
Johnny Joint rod end; 2.5;With .718 x 2.590 ball externally greased; California Residents: WARNING RockJock's weld-on Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 wall machined DOM tubing that is fitted with a zerk fitting for greasing. This specific joint is a 2 1/2 o.d. and features a 2.590 mounting width and a .718 thru bolt hole.
56.00 USD
RockJock Narrow Forged Johnny Joint - CE-9112N75-24
Narrow Forged Johnny Joint; 2; 2.445 in. X 0.515 in. Ball; 3/4 in.-16 RH Threaded Shank; Externally greased;Sold individually; California Residents: WARNING RockJock's narrow forged Johnny Joints for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 3/4-16 right hand threads on the shank, and a 2.445 mounting width ball with a .515 thru bolt hole. Finished in gold zinc plating.
60.00 USD
Rock Krawler Krawler Joint, 3/4 Inch Shank - RK01226L
Universal fitment;Corrosion resistant zinc coating;Fully machined Chromoly joint housing;16 TPI;Left hand thread;14 MM bolt bore;2.375 mounting width;Sold individually;Jam nuts sold separately;Made in the U.S.A; California Residents: WARNING The Pro Krawler Joint is a revolutionary joint manufactured with the tightest tolerances for ultimate consistency. The Chromoly joint housings are heat treated for increased strength and then zinc plated for corrosion resistance. The hard chrome plated inner ball is machined from billet 52100 steel for strength and durability. The inner raceway provides wear resistance, high frequency vibration isolation and durability. The body and clevis mounting width ratio of the Pro Krawler Joint is a key design feature which provides up to +/-30 degrees of misalignment. that is a total of 60 degrees of misalignment per side.
46.44 USD
RockJock 3.0 Inch Johnny Joint - CE-9111
3 inch Johnny Joint Rod End - Externally Greased;Universal Fit;All Chrome Moly Construction;Urethane Bushings;Externally Greased Via Zerk Fitting;Must Be Welded On;Fully Rebuildable; California Residents: WARNING For fabricators and suspension system builders. RockJocks Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made with a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, and is impervious to weather. The special center ball is heat-treated steel for extra strength, cross-drilled for thru-bolt lubrication, features a 9/16 thru bolt hole, and a 2 5/8 mounting width. The outer shell is .180 DOM tubing, and the retaining washers are heat-treated steel. 9/16 greaseable bolt with nut and washers included. Sold each.
131.00 USD
RockJock Forged Johnny Joint - CE-9114-27
Forged Johnny Joint(R); California Residents: WARNING The forged Jonny Joint is available for the custom suspension builder that needs a high angle joint that does not transmit road noise and clunk. The Johnny Joint is 100% rebuildable and field serviceable.
60.00 USD
RockJock Johnny Joint Rebuild Kit - CE-9110RK
Johnny Joint Rebuild Kit; California Residents: WARNING
19.00 USD
Rubicon Express Super Flex Coupler Rod End - RE3766-1
Super-Flex Builders Coupler;Small; California Residents: WARNING These assemblies are welded, powder coated Rubicon Grey and fully assembled ready for immediate use! Features a small Super Flex housing and 1 threaded coupler used in Rubicon track bars and upper control arms.
52.99 USD
RockJock 2.5 Inch Forged Johnny Joint, 1-14 Left Hand Thread Shank, 2.368 x 0.625 Ball - CE-9113L-18
Body type: forged steel;Body series: 2.5 inch OD, standard body;Mount width: 2.368 inches;Thread size: 1 inch, 14 TPI;Left hand threads;2.25 inch shank length;Hole diameter: .625 inch;Lubrication method: external zerk fitting located on joint body;Clear zinc plating body finish;Sold individually; California Residents: WARNING RockJock's forged Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 1-14 left hand threads on the shank, and a 2.368 mounting width ball with a .625 thru bolt hole. Finished in gold zinc plating.
60.00 USD
RockJock 2 Narrow Forged Johnny Joint - CE-9112N75L-22
Narrow forged Johnny Joint; 2; 1.850 in. x 0.562 in. ball; 3/4 in.-16 LH threaded shank; Externally greased;Sold individually; California Residents: WARNING RockJock's narrow forged Johnny Joints for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 3/4-16 left hand threads on the shank, and a 1.850 mounting width ball with a .562 thru bolt hole. Finished in gold zinc plating.
60.00 USD
RockJock Narrow 2.0 Inch Forged Johnny Joint, 1-14 Right Hand Thread Shank, 2.320 x 0.562 Ball - CE-9112N-23
Body type: forged steel;Body series: 2.0 inch OD, narrow body;Body width: 1.2 inches;Mount width: 2.32 inches;Thread size: 1 inch, 14 TPI;Right hand threads;2.25 inch shank length;Hole diameter: .562 inch (9/16, 14mm);Misalignment: 30 degrees total;Lubrication method: external zerk fitting located on joint body;Sold individually; California Residents: WARNING RockJock's narrow forged Johnny Joints for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 1-14 right hand threads on the shank, and a 2.320 mounting width ball with a .565 thru bolt hole. Finished in gold zinc plating.
60.00 USD
RockJock Forged Johnny Joint - CE-9114-24
Forged Johnny Joint; 2 1/2; 2.585 x 0.562 Ball; 1 1/4 in.-12 RH Threaded shank; Externally greased;Sold indiividually; California Residents: WARNING RockJock's forged Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 1 1/4-12 right hand threads on the shank, and a 2.585 mounting width ball with a .562 thru bolt hole. Finished in gold zinc plating.
60.00 USD
Rock Krawler Large Joint Tool - RK04484
1 inch, 1-1/4 inch, and 1-3/8 inch Krawler Joints;All Pro Flex Series Joints;Bare steel;Steel construction;Universal application;Fits 2 inch OD Joint Housing;Made in the U.S.A; California Residents: WARNING With Rock Krawler Suspensions Large Joint Tool you can easily rebuild or repair your Krawler Joints. This sock assembly requires the use of a 3/8 drive ratchet.
34.07 USD
RockJock Johnny Joint Rod End - CE-9110P-12
Johnny Joint Rod End; California Residents: WARNING RockJock Enterprises Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. Johnny Joint rod ends are made with a high density polyurethane bushing that encases a spherical ball and include a zerk for easy lubrication.
56.00 USD
Trail Gear Misalignment Spacers - 186008-KIT
; California Residents: WARNING High misalignment spacers increase misalignment by continuing the spherical diameter of the ball and allowing the edge of the ball to rotate into the body of the rod end. This allows greater articulation, more suspension travel, and longer life of the rod end.
25.52 USD
RockJock 2.5 Forged Johnny Joint, 1.25-12 Left Hand Thread - CE-9114L-27
Body type: forged steel;Body series: 2.5 inch OD;Mount width: 2.375 inches;Thread size: 1.25 inch, 12 TPI;Left hand threads;2.25 inch shank length;Hole diameter: .718 inch;Lubrication method: external zerk fitting located on joint body;Sold individually; California Residents: WARNING RockJock's forged Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 1 1/4-12 left hand threads on the shank, and a 2.375 mounting width ball with a .718 thru bolt hole. Finished in gold zinc plating.
60.00 USD
Rock Krawler Small Joint Tool - RK04487
3/4 inch and 7/8 inch Krawler Joints;Bare steel;Steel construction;Universal application;Fits 2 inch OD Joint Housing;Made in the U.S.A; California Residents: WARNING With Rock Krawler Suspensions Small Joint Tool you can easily rebuild or repair your Krawler Joints. This sock assembly requires the use of a 3/8 drive ratchet.
29.99 USD
Rock Krawler Krawler Joint, 3/4 Inch Shank - RK01226
Universal fitment;Corrosion resistant zinc coating;Fully machined Chromoly joint housing;16 TPI;Right hand thread;14 MM bolt bore;2.375 mounting width;Sold individually;Jam nuts sold separately;Made in the U.S.A; California Residents: WARNING The Pro Krawler Joint is a revolutionary joint manufactured with the tightest tolerances for ultimate consistency. The Chromoly joint housings are heat treated for increased strength and then zinc plated for corrosion resistance. The hard chrome plated inner ball is machined from billet 52100 steel for strength and durability. The inner raceway provides wear resistance, high frequency vibration isolation and durability. The body and clevis mounting width ratio of the Pro Krawler Joint is a key design feature which provides up to +/-30 degrees of misalignment. that is a total of 60 degrees of misalignment per side.
47.99 USD
Rock Krawler Krawler Joint, 7/8 Inch Shank - RK03544
Universal fitment;Corrosion resistant zinc coating;Fully machined Chromoly joint housing;14 TPI;Right hand thread;10 MM bolt bore;1.95 mounting width;Sold individually;Jam nuts sold separately;Made in the U.S.A; California Residents: WARNING The Pro Krawler Joint is a revolutionary joint manufactured with the tightest tolerances for ultimate consistency. The Chromoly joint housings are heat treated for increased strength and then zinc plated for corrosion resistance. The hard chrome plated inner ball is machined from billet 52100 steel for strength and durability. The inner raceway provides wear resistance, high frequency vibration isolation and durability. The body and clevis mounting width ratio of the Pro Krawler Joint is a key design feature which provides up to +/-30 degrees of misalignment. that is a total of 60 degrees of misalignment per side.
49.99 USD
Rock Krawler Krawler Joint, 1 Inch Shank - RK02989
Universal fitment;Corrosion resistant zinc coating;Fully machined Chromoly joint housing;14 TPI;Right hand thread;0.75 bolt bore;2.625 mounting width;Sold individually;Jam nuts sold separately;Made in the U.S.A; California Residents: WARNING The Pro Krawler Joint is a revolutionary joint manufactured with the tightest tolerances for ultimate consistency. The Chromoly joint housings are heat treated for increased strength and then zinc plated for corrosion resistance. The hard chrome plated inner ball is machined from billet 52100 steel for strength and durability. The inner raceway provides wear resistance, high frequency vibration isolation and durability. The body and clevis mounting width ratio of the Pro Krawler Joint is a key design feature which provides up to +/-30 degrees of misalignment. that is a total of 60 degrees of misalignment per side.
63.64 USD