VIAIR Stainless Steel Leader Hose - 92801
Length: 18 inch;1/8 inch Male NPT to 1/4 inch Female NPT Swivel; California Residents: WARNING Leader hoses allow hot air from compressors to cool while being delivered to a tire or air tank. Hoses with check valves help to protect the head of the compressor from damaging high pressure starting.
16.95 USD
VIAIR 30 Feet Extension Coil Hose - 00030
Max PSI: 200;Close ended;Quick Connect Coupler w/ Heat Shield; California Residents: WARNING Get the freedom you've been looking for with this 30 ft. extension hose from Viair. You'll no longer be limited to the range of your factory compressor hose once you replace it with this.
32.95 USD
VIAIR Onboard Air Hookup Kit - 20052
Kit includes a pressure switch, illuminated dash panel gauge with on/off switch, 20 ft. of air line and all necessary fittings; California Residents: WARNING Specially designed to work with VIAIR Air Compressors, these kits include a pressure switch, illuminated dash panel gauge with on/off switch, 20 ft. of air line, and all necessary fittings.
121.50 USD
VIAIR Stainless Steel Braided Leader Hose - 92805
1/4 inch Fitting with Check Valve;1/4 inch male to 1/4 inch male swivel; California Residents: WARNING To compliment their high quality compressors Viair has a full line of Stainless steel braided leader hoses to suit your needs. Not only do these hoses look good but the also protect you hoses offering longer service life.
35.99 USD
VIAIR 5-in-1 Inline Inflation/Deflation Coil Hose - 00025
25 ft. hose;PSI rating: 200 PSI;Construction: Polyurethane;100 PSI gauge;1/4 inch NPT male quick connect stud;Continuous inflation/deflation; California Residents: WARNING Open-ended air lines are meant for use with H model compressors, as well as portable compressors. They are not to be used with air tanks since they will allow air to flow freely from the air chuck as needed to fill tires and other inflatables while the
49.50 USD
VIAIR Air Source Relocation Kit - 90007
Contains:15ft of air line tubing;1/4 NPT Female Coupler;1/4 NPT Male Stud;Two 1/4 NPT male compression fittings;3 air line clips;4 continuous grommets; California Residents: WARNING Place your air source just about anywhere you want it with this relocation kit from VIAIR.
28.99 USD
VIAIR Stainless Steel Leader Hose - 92804
Length: 18 inch;1/4 inch Male NPT to 1/4 inch Male NPT Swivel; California Residents: WARNING Leader hoses allow hot air from compressors to cool while being delivered to a tire or air tank. Hoses with check valves help to protect the head of the compressor from damaging high pressure starting.
17.99 USD
VIAIR 2 Gallon Tank - 91022
Dimensions: 19 inch L x 6 inch W x 7.5 inch H;150 PSI Rated; California Residents: WARNING Dimensions: 19.00L x 6.00W x 7.50H, Six 1/8 NPT Ports
88.99 USD
Smittybilt 2.5 Gallon Air Tank - 99210-2
Push in fittings (male and female);Quick connect studs;90 degree elbows;Drain cock;Nylon hose;Pressure gauge;Dimensions: L 17 x W 6-1/2 x H 9;Includes 10mm & 4mm hoses;All necessary hardware; California Residents: WARNING The 2.5 Gallon Air Tank includes: Push In fittings (male and female), Quick connect studs, 90 deg. elbows, Drain cock, Nylon hose, Pressure gauge and all necessary hardware.
88.99 USD
VIAIR 1 Gallon Tank - 91014
Max Pressure: 150 PSI;Four 1/4 inch NPT Ports;Dimensions: 10.25 inch L x 6 inch W x 7.5 inch H;Rust resistant coating;Mounting Hardware Included; California Residents: WARNING VIAIR tanks are internally coated for corrosion resistance. All VIAIR tanks are SAE J-10 self-compliant.
59.99 USD