Chelsea 280GMFJP-B8SD - 280 Series Powershift Hydraulic 10 Bolt Power Take Off
Representative Image - The product image above applies to all Chelsea Series 280 PTOs and is not part specific. Please verify the product using the part number. Chelsea 280 Series is a hydraulically shifted hot shift PTO designed for automatic transmissions with a 10-Bolt aperture, commonly found on Allison and Caterpiller transmissions. The 280 Series replaces the 277/278 Series. Chelsea's 280 Series is a new PTO that delivers high continuous-duty torque in a range of speeds where power and durability are required. It is capable of up to 390 ft-lbs in continuous duty applications. With nine ratios, rotatable output flanges, remote hydraulic valve options, wet-spline technology, and Chelsea Smart Start options, it is perfect for Vacuum, Refuse, and Fire and Rescue applications in the Mobile market. Markets: Aerial Oil and Gas Defense On-Highway Products Features: Rotatable Flanges to improve clearance Continuous-Duty Torque Rating up to 390 ft-lbs Wet-Spline Option to extend PTO/Pump shaft life Smart Start Option for High-Torque Start-up Two Year Warranty Applications: Fire and Rescue Trucks Pumper Cleaner Truck Cranes Refuse Trucks Performance Characteristics: Mounting Style: 10-Bolt Shift Type: Powershift Hydraulic Standard Output Shaft Size: 1-1/4" Round w/key Continuous Torque Rating (Lbs-ft): 390 Continuous Torque Rating (Nm): 529 Hosepower Rating for Continuous Service: At 500 R.P.M. of Output Shaft (HP): 37 At 500 R.P.M. of Output Shaft (Kw): 28 At 1000 R.P.M. of Output Shaft (HP): 74 At 1000 R.P.M. of Output Shaft (Kw): 56 Approximate Weight: 49 lbs. [22 kg] * Check Application Pages for Actual Torque Ratings Specifications: Mounting Type: Standard Mount 10-Bolt with Metric Studs Gear Ratio: 31/41 Input Type: Allison (Automatically Pressured Lube) Lube Type: Pressure Lube Shift Type: 12V Electric / Hydraulic Assembly Arrangement: Left Side: Bulge Down, Right Side: Bulge Up Output Type: Round Standard Shaft (1.25"-5/16" Key).
3324.94 USD
Chelsea 489XLAHX-V3SQ - 489 Series Mechanical Shift 8 Bolt Power Take Off
Representative Image - The product image above applies to all Chelsea Series 489 PTOs and is not part specific. Please verify the product using the part number. Chelsea 489 Series Power Take-Off fits most manual transmissions with an 8-Bolt PTO mounting aperture. The Chelsea 489 Series Power Take-Off (PTO) is another example of why Chelsea PTO technology is the best in the business. Its specifically designed to reduce mounting time. The one-piece, cast iron PTO housing bolts on to the 8-Bolt transmission opening, but gives the same torque capacity as the 442 Series. That means one less part to buy, one less surface to leak, and faster installation. The 489 has strong tapered bearings instead of needle bearings for greater load bearing capability. Thirty six output options including Chelseas popular 360 rotatable flange. Eleven internal speed ratios and ten shift options plus a self-lube option for transmissions that have problems getting lubrication to the PTO make this one versatile PTO. Take advantage of over 65 years of Chelsea PTO technology to increase performance and lower costs. Product Features: 442 Series family, but with an 8-Bolt mounting flange Less installation time, less expense and less chance of leakage Wide range of shifters options and pump flanges Two Year Warranty Markets: Aerial Snow and Ice Removal Fire and Rescue Dump Truck and Trailer Service Trucks Refuse Performance Characteristics: Mounting Style: 8-Bolt Intermittent Torque Rating (Lbs-ft) 250 Intermittent Torque Rating (Nm) 339 Hosepower Rating for Intermittent Service At 500 R.P.M. of Output Shaft (HP) 24 At 500 R.P.M. of Output Shaft (Kw) 18 At 1000 R.P.M. of Output Shaft (HP) 48 At 1000 R.P.M. of Output Shaft (Kw) 36 Approximate Weight: 30 lbs. [13.6 kg] Specifications: Mounting Type: Standard Mount Gear Ratio: 25/34 Input Gear Designator: Universal, Part No. 5-P-1004 Lube Type: without Pressure Lube Shift Type: Air Shift (without installation Kit) Assembly Arrangement: 3 Output Type: SAE B 4-Bolt Flange, SAE B Shaft (7/8" - 13T).
1315.07 USD
Chelsea 280GDFJP-B8RK - 280 Series Powershift Hydraulic 10 Bolt Power Take Off
Representative Image - The product image above applies to all Chelsea Series 280 PTOs and is not part specific. Please verify the product using the part number. Chelsea 280 Series is a hydraulically shifted hot shift PTO designed for automatic transmissions with a 10-Bolt aperture, commonly found on Allison and Caterpiller transmissions. The 280 Series replaces the 277/278 Series. Chelsea's 280 Series is a new PTO that delivers high continuous-duty torque in a range of speeds where power and durability are required. It is capable of up to 390 ft-lbs in continuous duty applications. With nine ratios, rotatable output flanges, remote hydraulic valve options, wet-spline technology, and Chelsea Smart Start options, it is perfect for Vacuum, Refuse, and Fire and Rescue applications in the Mobile market. Markets: Aerial Oil and Gas Defense On-Highway Products Features: Rotatable Flanges to improve clearance Continuous-Duty Torque Rating up to 390 ft-lbs Wet-Spline Option to extend PTO/Pump shaft life Smart Start Option for High-Torque Start-up Two Year Warranty Applications: Fire and Rescue Trucks Pumper Cleaner Truck Cranes Refuse Trucks Performance Characteristics: Mounting Style: 10-Bolt Shift Type: Powershift Hydraulic Standard Output Shaft Size: 1-1/4" Round w/key Continuous Torque Rating (Lbs-ft): 390 Continuous Torque Rating (Nm): 529 Hosepower Rating for Continuous Service: At 500 R.P.M. of Output Shaft (HP): 37 At 500 R.P.M. of Output Shaft (Kw): 28 At 1000 R.P.M. of Output Shaft (HP): 74 At 1000 R.P.M. of Output Shaft (Kw): 56 Approximate Weight: 49 lbs. [22 kg] * Check Application Pages for Actual Torque Ratings Specifications: Mounting Type: Standard Mount 10-Bolt with Metric Studs Gear Ratio: 31/41 Input Type: Allison (Automatically Pressured Lube) Lube Type: Pressure Lube Shift Type: 12V Electric / Hydraulic Assembly Arrangement: Left Side: Bulge Down, Right Side: Bulge Up Output Type: Round Standard Shaft (1.25"-5/16" Key).
3160.96 USD
Chelsea 280GPFJP-B5RK - 280 Series Powershift Hydraulic 10 Bolt Power Take Off
Representative Image - The product image above applies to all Chelsea Series 280 PTOs and is not part specific. Please verify the product using the part number. Chelsea 280 Series is a hydraulically shifted hot shift PTO designed for automatic transmissions with a 10-Bolt aperture, commonly found on Allison and Caterpiller transmissions. The 280 Series replaces the 277/278 Series. Chelsea's 280 Series is a new PTO that delivers high continuous-duty torque in a range of speeds where power and durability are required. It is capable of up to 390 ft-lbs in continuous duty applications. With nine ratios, rotatable output flanges, remote hydraulic valve options, wet-spline technology, and Chelsea Smart Start options, it is perfect for Vacuum, Refuse, and Fire and Rescue applications in the Mobile market. Markets: Aerial Oil and Gas Defense On-Highway Products Features: Rotatable Flanges to improve clearance Continuous-Duty Torque Rating up to 390 ft-lbs Wet-Spline Option to extend PTO/Pump shaft life Smart Start Option for High-Torque Start-up Two Year Warranty Applications: Fire and Rescue Trucks Pumper Cleaner Truck Cranes Refuse Trucks Performance Characteristics: Mounting Style: 10-Bolt Shift Type: Powershift Hydraulic Standard Output Shaft Size: 1-1/4" Round w/key Continuous Torque Rating (Lbs-ft): 390 Continuous Torque Rating (Nm): 529 Hosepower Rating for Continuous Service: At 500 R.P.M. of Output Shaft (HP): 37 At 500 R.P.M. of Output Shaft (Kw): 28 At 1000 R.P.M. of Output Shaft (HP): 74 At 1000 R.P.M. of Output Shaft (Kw): 56 Approximate Weight: 49 lbs. [22 kg] * Check Application Pages for Actual Torque Ratings Specifications: Mounting Type: Standard Mount 10-Bolt with Metric Studs Gear Ratio: 31/41 Input Type: Allison (Automatically Pressured Lube) Lube Type: Pressure Lube Shift Type: 12V Electric / Hydraulic Assembly Arrangement: Left Side: Bulge Down, Right Side: Bulge Up Output Type: Round Standard Shaft (1.25"-5/16" Key).
3160.96 USD
Chelsea 238XAAHX-A5BD - 238 Series Power Shift Pneumatic 8 Bolt Power Take Off
Chelsea 238 Series Powershift Power Take-Off is designed for medium and heavy duty transmissions. It is a part of the 236 Series family with an 8-Bolt mounting flange. In the past when you wanted to mount a Chelsea PowerShift (Air) Power Take-Off ( PTO ) to an eight bolt opening on a manual transmission, you have had to use our 236 Series with an adapter. Now Chelsea has eliminated the need for the use of an adapter in these applications with the release of the Chelsea 238 Series Power Take-Off ( PTO ) The 238 Series now gives you the ability to mount directly to the 8-Bolt openings just as you have done for years with the 489 Series. Using the same popular design as our 236 Series, the 238 Series will become standard for applications requiring an Air Shifted 8-Bolt Powershift PTO . Coverage will be on transmissions (Fuller, Mack, Spicer/TTC, Chelsea). Products Features: Comes as a KIT PTO same input gears as 236 & 442 Series Inspection Cover Set backlash accurately Slip Fit Idler Pin Ease of Servicing Two Year Warranty Markets: LP Gas Trucks Water Trucks Fire and Rescue Technical Specifications Performance Characteristics Mounting Style 8-Bolt Shift Type PowerShift Pneumatic Standard Output Shaft Size 1-1/4" Round w/key Intermittent Torque Rating (Lbs-ft) 250 Intermittent Torque Rating (Nm) 339 Hosepower Rating for Intermittent Service At 500 R.P.M. of Output Shaft (HP) 24 At 500 R.P.M. of Output Shaft (Kw) 18 At 1000 R.P.M. of Output Shaft (HP) 48 At 1000 R.P.M. of Output Shaft (Kw) 36 Approximate Weight: 49 Lbs. [22 kg] * Check Application Pages for Actual Torque Ratings.
2229.12 USD
Chelsea 880GMAHX-P3AF - 880 Series Mechanical Shift 8 Bolt Power Take Off
Representative Image - The product image above applies to all Chelsea Series 880 PTOs and is not part specific. Please verify the product using the part number. Chelsea 880 Series Power Take-Off fit most manual transmissions. Ideal for Product blowers, oil rigs, fire trucks, large-capacity tow vehicles and other tough challenges. Not every PTO is as tough as a Chelsea 880 Series Power Take-Off (PTO). That's because many dont need to be. But if youre using bulk haulers, fire trucks, oil rigs, utility and generator applications, large truck recovery or other tough challenges, the Chelsea 8-Bolt 880 Series PTO is designed for high and low speed, high torque applications with constant mesh input gears. It features a standard lever control shift, or an optional air control shift. Pressure lubrication is available to ensure longer bearing life. Tapered cone bearing offer excellent load bearing capability. And the rugged cast-iron housing is extremely durable. The shift cover is removable, making backlash adjustment easier and more accurate. Specifically, the 880 is an 8-Bolt, 10 spline, 1-1/2" output shaft PTO, rated for up to 500 Lbs-ft torque for intermittent service. Product Features: Speed ratios for high and low speed applications Removable shift cover for adjusting backlash Dual-Pump output for mounting a pump on each end of the PTO Two Year Warranty Markets: Bulk Haulers Fire Trucks Oil Field Aerial Large Truck Recovery Performance Characteristics: Mounting Style: 8-Bolt Shift Type: Mechanical Standard Output Shaft Size: 1-1/2" 10 Spline with 1410 Flange Intermittent Torque Rating (Lbs-ft): 500 Intermittent Torque Rating (Nm): 678 Hosepower Rating for Intermittent Service At 500 R.P.M. of Output Shaft (HP): 48 At 500 R.P.M. of Output Shaft (Kw): 36 At 1000 R.P.M. of Output Shaft (HP): 95 At 1000 R.P.M. of Output Shaft (Kw): 71 Approximate Weight: 63 lbs. [28.6 kg] * Check Application Pages for Actual Torque Ratings Specifications: Mounting Type: Standard Mount with Metric Studs Gear Ratio: 25/25 Input Type: 32-Teeth Input Gear, 25-Teeth Spur Gear, 25-Teeth Output Gear Lube Type: without Pressure Lube Shift Type: 12V Electrical / Air Shift (with mounting Parts) Assembly Arrangement: Right Side: Bulge Down, Left Side: Bulge Up Output Type: Pump Mount, SAE "B" 2- or 4-Bolt Flange, SAE "BB" Shaft (1"-15T).
4965.92 USD
Chelsea 280GDFJP-G5RK - 280 Series Powershift Hydraulic 10 Bolt Power Take Off
Representative Image - The product image above applies to all Chelsea Series 280 PTOs and is not part specific. Please verify the product using the part number. Chelsea 280 Series is a hydraulically shifted hot shift PTO designed for automatic transmissions with a 10-Bolt aperture, commonly found on Allison and Caterpiller transmissions. The 280 Series replaces the 277/278 Series. Chelsea's 280 Series is a new PTO that delivers high continuous-duty torque in a range of speeds where power and durability are required. It is capable of up to 390 ft-lbs in continuous duty applications. With nine ratios, rotatable output flanges, remote hydraulic valve options, wet-spline technology, and Chelsea Smart Start options, it is perfect for Vacuum, Refuse, and Fire and Rescue applications in the Mobile market. Markets: Aerial Oil and Gas Defense On-Highway Products Features: Rotatable Flanges to improve clearance Continuous-Duty Torque Rating up to 390 ft-lbs Wet-Spline Option to extend PTO/Pump shaft life Smart Start Option for High-Torque Start-up Two Year Warranty Applications: Fire and Rescue Trucks Pumper Cleaner Truck Cranes Refuse Trucks Performance Characteristics: Mounting Style: 10-Bolt Shift Type: Powershift Hydraulic Standard Output Shaft Size: 1-1/4" Round w/key Continuous Torque Rating (Lbs-ft): 390 Continuous Torque Rating (Nm): 529 Hosepower Rating for Continuous Service: At 500 R.P.M. of Output Shaft (HP): 37 At 500 R.P.M. of Output Shaft (Kw): 28 At 1000 R.P.M. of Output Shaft (HP): 74 At 1000 R.P.M. of Output Shaft (Kw): 56 Approximate Weight: 49 lbs. [22 kg] * Check Application Pages for Actual Torque Ratings Specifications: Mounting Type: Standard Mount 10-Bolt with Metric Studs Gear Ratio: 31/41 Input Type: Allison (Automatically Pressured Lube) Lube Type: Pressure Lube Shift Type: 12V Electric / Hydraulic Assembly Arrangement: Left Side: Bulge Down, Right Side: Bulge Up Output Type: Round Standard Shaft (1.25"-5/16" Key).
3160.96 USD
Chelsea 524XVASX-V-XV - 524 Series Mechanical Shift Rear Mount Power Take Off (Pto)
Chelsea 524 Series Rear Mount Power Take-Off (PTO) two gear design provides a compact housing which helps eliminate clearance issues along with three speed ratios to meet your application requirements. The superior design of this PTO provides all the power you will need so there was no need to de-rate the PTO for continuous applications. This PTO features a quick assembly sealed bayonet connector for the indicator switch. Six shift options are integrated into the PTO housing for a space saving design as well two direct mount pump output flanges. Input adapters are available for ZF, Mack mDrive, Volvo I-Shift, and Eaton Endurant transmissions. With versatility, power, ease of maintenance and installation made the 524 Series a great choice for your vocational truck requirement. Markets: Aerial On-Highway Oil & Gas Other Mobile Features/Benefits: Global Transmission Coverage High Capacity Bearings Ease of Installation Two Year Warranty Applications: Fire Aerial Refuse Tippers Sewer and Sanitation.
1852.80 USD
Chelsea 442ZHDAX-A3XK - 442 Series Mechanical Shift 6 Bolt Power Take Off
Representative Image - The product image above applies to all Chelsea Series 442 PTOs and is not part specific. Please verify the product using the part number. The Chelsea 442 Series PTO is engineered to work with virtually all existing 6-Bolt transmission applications today. It has a cast iron housing and tapered cone bearings to give it the best in class torque rating and longest service life. The Chelsea 442 Series Power Take-Off (PTO) is another example of why Chelsea PTO technology is the best in the business. This economical workhorse features a cast iron housing and tapered cone bearings on the output shaft, giving it a robust torque rating and long service life. It is perfect for light-to-medium duty applications where dependability is important. Thirty-six output options, including Chelsea's popular 360 rotatable flange, eleven internal speed ratios, and ten shift options make this one versatile PTO. The 442 is ideal for tow trucks, service trucks, dump trucks, and small aerial trucks. Take advantage of over 65 years of Chelsea PTO technology to increase performance and lower costs. Markets: Aerial Fire and Rescue Construction Equipment Forestry Equipment Vocational and Municipal Equipment Product Features: Cast iron housing for long service life Low-profile shift cover Rotatable output flanges for improved clearance Greaseable output shafts for extended life Two-year Warranty Applications: Snow and Ice Trucks Service Trucks Dump Truck Towing and Recovery Trucks Performance Characteristics: Mounting Style: 6-Bolt Shift Type: Wire/Cable Mechanical Standard Output Shaft Size: 1-1/4" Round with / without Key Intermittent Torque Rating (Lbs-ft): 250 Intermittent Torque Rating (Nm): 339 Hosepower Rating for Intermittent Service: At 500 R.P.M. of Output Shaft (HP): 24 At 500 R.P.M. of Output Shaft (Kw): 18 At 1000 R.P.M. of Output Shaft (HP): 48 At 1000 R.P.M. of Output Shaft (Kw): 36 Approximate Weight: 21 lbs. [9.5Kg] * Check Application Pages for Actual Torque Ratings Specifications: Mounting Type: Deep Mount Gear Ratio: 23/35 Input Gear: 23-Teeth Spur Gear Lube Type: without Pressure Lube Shift Type: Air Shift Assembly Arrangement: 3 Output Type: SAE "B" 2 or 4-Bolt Flange, (7/8"-13T).
1415.28 USD
Chelsea 442ZFDAX-V4RB - 442 Series Mechanical Shift 6 Bolt Power Take Off
Representative Image - The product image above applies to all Chelsea Series 442 PTOs and is not part specific. Please verify the product using the part number. The Chelsea 442 Series PTO is engineered to work with virtually all existing 6-Bolt transmission applications today. It has a cast iron housing and tapered cone bearings to give it the best in class torque rating and longest service life. The Chelsea 442 Series Power Take-Off (PTO) is another example of why Chelsea PTO technology is the best in the business. This economical workhorse features a cast iron housing and tapered cone bearings on the output shaft, giving it a robust torque rating and long service life. It is perfect for light-to-medium duty applications where dependability is important. Thirty-six output options, including Chelsea's popular 360 rotatable flange, eleven internal speed ratios, and ten shift options make this one versatile PTO. The 442 is ideal for tow trucks, service trucks, dump trucks, and small aerial trucks. Take advantage of over 65 years of Chelsea PTO technology to increase performance and lower costs. Markets: Aerial Fire and Rescue Construction Equipment Forestry Equipment Vocational and Municipal Equipment Product Features: Cast iron housing for long service life Low-profile shift cover Rotatable output flanges for improved clearance Greaseable output shafts for extended life Two-year Warranty Applications: Snow and Ice Trucks Service Trucks Dump Truck Towing and Recovery Trucks Performance Characteristics: Mounting Style: 6-Bolt Shift Type: Wire/Cable Mechanical Standard Output Shaft Size: 1-1/4" Round with / without Key Intermittent Torque Rating (Lbs-ft): 250 Intermittent Torque Rating (Nm): 339 Hosepower Rating for Intermittent Service: At 500 R.P.M. of Output Shaft (HP): 24 At 500 R.P.M. of Output Shaft (Kw): 18 At 1000 R.P.M. of Output Shaft (HP): 48 At 1000 R.P.M. of Output Shaft (Kw): 36 Approximate Weight: 21 lbs. [9.5Kg] * Check Application Pages for Actual Torque Ratings Specifications: Mounting Type: Deep Mount Gear Ratio: 21/37 Input Gear: 23-Teeth Spur Gear Lube Type: without Pressure Lube Shift Type: Air Shift (without Installation Kit) Assembly Arrangement: 4 Output Type: Rotatable SAE "B" 4-Bolt Flange, (7/8"-13T).
1316.86 USD
Chelsea 280GGFJP-B5SD - 280 Series Powershift Hydraulic 10 Bolt Power Take Off
Representative Image - The product image above applies to all Chelsea Series 280 PTOs and is not part specific. Please verify the product using the part number. Chelsea 280 Series is a hydraulically shifted hot shift PTO designed for automatic transmissions with a 10-Bolt aperture, commonly found on Allison and Caterpiller transmissions. The 280 Series replaces the 277/278 Series. Chelsea's 280 Series is a new PTO that delivers high continuous-duty torque in a range of speeds where power and durability are required. It is capable of up to 390 ft-lbs in continuous duty applications. With nine ratios, rotatable output flanges, remote hydraulic valve options, wet-spline technology, and Chelsea Smart Start options, it is perfect for Vacuum, Refuse, and Fire and Rescue applications in the Mobile market. Markets: Aerial Oil and Gas Defense On-Highway Products Features: Rotatable Flanges to improve clearance Continuous-Duty Torque Rating up to 390 ft-lbs Wet-Spline Option to extend PTO/Pump shaft life Smart Start Option for High-Torque Start-up Two Year Warranty Applications: Fire and Rescue Trucks Pumper Cleaner Truck Cranes Refuse Trucks Performance Characteristics: Mounting Style: 10-Bolt Shift Type: Powershift Hydraulic Standard Output Shaft Size: 1-1/4" Round w/key Continuous Torque Rating (Lbs-ft): 390 Continuous Torque Rating (Nm): 529 Hosepower Rating for Continuous Service: At 500 R.P.M. of Output Shaft (HP): 37 At 500 R.P.M. of Output Shaft (Kw): 28 At 1000 R.P.M. of Output Shaft (HP): 74 At 1000 R.P.M. of Output Shaft (Kw): 56 Approximate Weight: 49 lbs. [22 kg] * Check Application Pages for Actual Torque Ratings Specifications: Mounting Type: Standard Mount 10-Bolt with Metric Studs Gear Ratio: 31/41 Input Type: Allison (Automatically Pressured Lube) Lube Type: Pressure Lube Shift Type: 12V Electric / Hydraulic Assembly Arrangement: Left Side: Bulge Down, Right Side: Bulge Up Output Type: Round Standard Shaft (1.25"-5/16" Key).
3324.94 USD
Chelsea 880XMDAX-A5AF - 880 Series Mechanical Shift 8 Bolt Power Take Off
Representative Image - The product image above applies to all Chelsea Series 880 PTOs and is not part specific. Please verify the product using the part number. Chelsea 880 Series Power Take-Off fit most manual transmissions. Ideal for Product blowers, oil rigs, fire trucks, large-capacity tow vehicles and other tough challenges. Not every PTO is as tough as a Chelsea 880 Series Power Take-Off (PTO). That's because many dont need to be. But if youre using bulk haulers, fire trucks, oil rigs, utility and generator applications, large truck recovery or other tough challenges, the Chelsea 8-Bolt 880 Series PTO is designed for high and low speed, high torque applications with constant mesh input gears. It features a standard lever control shift, or an optional air control shift. Pressure lubrication is available to ensure longer bearing life. Tapered cone bearing offer excellent load bearing capability. And the rugged cast-iron housing is extremely durable. The shift cover is removable, making backlash adjustment easier and more accurate. Specifically, the 880 is an 8-Bolt, 10 spline, 1-1/2" output shaft PTO, rated for up to 500 Lbs-ft torque for intermittent service. Product Features: Speed ratios for high and low speed applications Removable shift cover for adjusting backlash Dual-Pump output for mounting a pump on each end of the PTO Two Year Warranty Markets: Bulk Haulers Fire Trucks Oil Field Aerial Large Truck Recovery Performance Characteristics: Mounting Style: 8-Bolt Shift Type: Mechanical Standard Output Shaft Size: 1-1/2" 10 Spline with 1410 Flange Intermittent Torque Rating (Lbs-ft): 500 Intermittent Torque Rating (Nm): 678 Hosepower Rating for Intermittent Service At 500 R.P.M. of Output Shaft (HP): 48 At 500 R.P.M. of Output Shaft (Kw): 36 At 1000 R.P.M. of Output Shaft (HP): 95 At 1000 R.P.M. of Output Shaft (Kw): 71 Approximate Weight: 63 lbs. [28.6 kg] * Check Application Pages for Actual Torque Ratings Specifications: Mounting Type: Standard Mount Gear Ratio: 25/25 Input Type: 35-Teeth Input Gear, 25-Teeth Spur Gear, 25-Teeth Output Gear Lube Type: without Pressure Lube Shift Type: Air Shift (with mounting parts) Assembly Arrangement: Left Side: Bulge Down, Right Side: Bulge Up Output Type: Pump Mount, SAE "B" 2- or 4-Bolt Flange, SAE "BB" Shaft (1"-15T).
4934.02 USD
Chelsea 280GPFJP-B8SD - 280 Series Powershift Hydraulic 10 Bolt Power Take Off
Representative Image - The product image above applies to all Chelsea Series 280 PTOs and is not part specific. Please verify the product using the part number. Chelsea 280 Series is a hydraulically shifted hot shift PTO designed for automatic transmissions with a 10-Bolt aperture, commonly found on Allison and Caterpiller transmissions. The 280 Series replaces the 277/278 Series. Chelsea's 280 Series is a new PTO that delivers high continuous-duty torque in a range of speeds where power and durability are required. It is capable of up to 390 ft-lbs in continuous duty applications. With nine ratios, rotatable output flanges, remote hydraulic valve options, wet-spline technology, and Chelsea Smart Start options, it is perfect for Vacuum, Refuse, and Fire and Rescue applications in the Mobile market. Markets: Aerial Oil and Gas Defense On-Highway Products Features: Rotatable Flanges to improve clearance Continuous-Duty Torque Rating up to 390 ft-lbs Wet-Spline Option to extend PTO/Pump shaft life Smart Start Option for High-Torque Start-up Two Year Warranty Applications: Fire and Rescue Trucks Pumper Cleaner Truck Cranes Refuse Trucks Performance Characteristics: Mounting Style: 10-Bolt Shift Type: Powershift Hydraulic Standard Output Shaft Size: 1-1/4" Round w/key Continuous Torque Rating (Lbs-ft): 390 Continuous Torque Rating (Nm): 529 Hosepower Rating for Continuous Service: At 500 R.P.M. of Output Shaft (HP): 37 At 500 R.P.M. of Output Shaft (Kw): 28 At 1000 R.P.M. of Output Shaft (HP): 74 At 1000 R.P.M. of Output Shaft (Kw): 56 Approximate Weight: 49 lbs. [22 kg] * Check Application Pages for Actual Torque Ratings Specifications: Mounting Type: Standard Mount 10-Bolt with Metric Studs Gear Ratio: 31/41 Input Type: Allison (Automatically Pressured Lube) Lube Type: Pressure Lube Shift Type: 12V Electric / Hydraulic Assembly Arrangement: Left Side: Bulge Down, Right Side: Bulge Up Output Type: Round Standard Shaft (1.25"-5/16" Key).
3324.94 USD
Chelsea 280GGFJP-B5SV - 280 Series Powershift Hydraulic 10 Bolt Power Take Off
Representative Image - The product image above applies to all Chelsea Series 280 PTOs and is not part specific. Please verify the product using the part number. Chelsea 280 Series is a hydraulically shifted hot shift PTO designed for automatic transmissions with a 10-Bolt aperture, commonly found on Allison and Caterpiller transmissions. The 280 Series replaces the 277/278 Series. Chelsea's 280 Series is a new PTO that delivers high continuous-duty torque in a range of speeds where power and durability are required. It is capable of up to 390 ft-lbs in continuous duty applications. With nine ratios, rotatable output flanges, remote hydraulic valve options, wet-spline technology, and Chelsea Smart Start options, it is perfect for Vacuum, Refuse, and Fire and Rescue applications in the Mobile market. Markets: Aerial Oil and Gas Defense On-Highway Products Features: Rotatable Flanges to improve clearance Continuous-Duty Torque Rating up to 390 ft-lbs Wet-Spline Option to extend PTO/Pump shaft life Smart Start Option for High-Torque Start-up Two Year Warranty Applications: Fire and Rescue Trucks Pumper Cleaner Truck Cranes Refuse Trucks Performance Characteristics: Mounting Style: 10-Bolt Shift Type: Powershift Hydraulic Standard Output Shaft Size: 1-1/4" Round w/key Continuous Torque Rating (Lbs-ft): 390 Continuous Torque Rating (Nm): 529 Hosepower Rating for Continuous Service: At 500 R.P.M. of Output Shaft (HP): 37 At 500 R.P.M. of Output Shaft (Kw): 28 At 1000 R.P.M. of Output Shaft (HP): 74 At 1000 R.P.M. of Output Shaft (Kw): 56 Approximate Weight: 49 lbs. [22 kg] * Check Application Pages for Actual Torque Ratings Specifications: Mounting Type: Standard Mount 10-Bolt with Metric Studs Gear Ratio: 31/41 Input Type: Allison (Automatically Pressured Lube) Lube Type: Pressure Lube Shift Type: 12V Electric / Hydraulic Assembly Arrangement: Left Side: Bulge Down, Right Side: Bulge Up Output Type: Round Standard Shaft (1.25"-5/16" Key).
3593.79 USD
Chelsea 280GDFJW-B8RY - 280 Series Powershift Hydraulic 10 Bolt Power Take Off
Representative Image - The product image above applies to all Chelsea Series 280 PTOs and is not part specific. Please verify the product using the part number. Chelsea 280 Series is a hydraulically shifted hot shift PTO designed for automatic transmissions with a 10-Bolt aperture, commonly found on Allison and Caterpiller transmissions. The 280 Series replaces the 277/278 Series. Chelsea's 280 Series is a new PTO that delivers high continuous-duty torque in a range of speeds where power and durability are required. It is capable of up to 390 ft-lbs in continuous duty applications. With nine ratios, rotatable output flanges, remote hydraulic valve options, wet-spline technology, and Chelsea Smart Start options, it is perfect for Vacuum, Refuse, and Fire and Rescue applications in the Mobile market. Markets: Aerial Oil and Gas Defense On-Highway Products Features: Rotatable Flanges to improve clearance Continuous-Duty Torque Rating up to 390 ft-lbs Wet-Spline Option to extend PTO/Pump shaft life Smart Start Option for High-Torque Start-up Two Year Warranty Applications: Fire and Rescue Trucks Pumper Cleaner Truck Cranes Refuse Trucks Performance Characteristics: Mounting Style: 10-Bolt Shift Type: Powershift Hydraulic Standard Output Shaft Size: 1-1/4" Round w/key Continuous Torque Rating (Lbs-ft): 390 Continuous Torque Rating (Nm): 529 Hosepower Rating for Continuous Service: At 500 R.P.M. of Output Shaft (HP): 37 At 500 R.P.M. of Output Shaft (Kw): 28 At 1000 R.P.M. of Output Shaft (HP): 74 At 1000 R.P.M. of Output Shaft (Kw): 56 Approximate Weight: 49 lbs. [22 kg] * Check Application Pages for Actual Torque Ratings Specifications: Mounting Type: Standard Mount 10-Bolt with Metric Studs Gear Ratio: 31/41 Input Type: Allison (Automatically Pressured Lube) Lube Type: Pressure Lube Shift Type: 12V Electric / Hydraulic Assembly Arrangement: Left Side: Bulge Down, Right Side: Bulge Up Output Type: Round Standard Shaft (1.25"-5/16" Key).
3627.07 USD
Chelsea 280GGFJW-B5RK - 280 Series Powershift Hydraulic 10 Bolt Power Take Off
Representative Image - The product image above applies to all Chelsea Series 280 PTOs and is not part specific. Please verify the product using the part number. Chelsea 280 Series is a hydraulically shifted hot shift PTO designed for automatic transmissions with a 10-Bolt aperture, commonly found on Allison and Caterpiller transmissions. The 280 Series replaces the 277/278 Series. Chelsea's 280 Series is a new PTO that delivers high continuous-duty torque in a range of speeds where power and durability are required. It is capable of up to 390 ft-lbs in continuous duty applications. With nine ratios, rotatable output flanges, remote hydraulic valve options, wet-spline technology, and Chelsea Smart Start options, it is perfect for Vacuum, Refuse, and Fire and Rescue applications in the Mobile market. Markets: Aerial Oil and Gas Defense On-Highway Products Features: Rotatable Flanges to improve clearance Continuous-Duty Torque Rating up to 390 ft-lbs Wet-Spline Option to extend PTO/Pump shaft life Smart Start Option for High-Torque Start-up Two Year Warranty Applications: Fire and Rescue Trucks Pumper Cleaner Truck Cranes Refuse Trucks Performance Characteristics: Mounting Style: 10-Bolt Shift Type: Powershift Hydraulic Standard Output Shaft Size: 1-1/4" Round w/key Continuous Torque Rating (Lbs-ft): 390 Continuous Torque Rating (Nm): 529 Hosepower Rating for Continuous Service: At 500 R.P.M. of Output Shaft (HP): 37 At 500 R.P.M. of Output Shaft (Kw): 28 At 1000 R.P.M. of Output Shaft (HP): 74 At 1000 R.P.M. of Output Shaft (Kw): 56 Approximate Weight: 49 lbs. [22 kg] * Check Application Pages for Actual Torque Ratings Specifications: Mounting Type: Standard Mount 10-Bolt with Metric Studs Gear Ratio: 31/41 Input Type: Allison (Automatically Pressured Lube) Lube Type: Pressure Lube Shift Type: 12V Electric / Hydraulic Assembly Arrangement: Left Side: Bulge Down, Right Side: Bulge Up Output Type: Round Standard Shaft (1.25"-5/16" Key).
3330.27 USD
Chelsea 280GSFJPB3XD - 280 Series Powershift Hydraulic 10 Bolt Power Take Off
Representative Image - The product image above applies to all Chelsea Series 280 PTOs and is not part specific. Please verify the product using the part number. Chelsea 280 Series is a hydraulically shifted hot shift PTO designed for automatic transmissions with a 10-Bolt aperture, commonly found on Allison and Caterpiller transmissions. The 280 Series replaces the 277/278 Series. Chelsea's 280 Series is a new PTO that delivers high continuous-duty torque in a range of speeds where power and durability are required. It is capable of up to 390 ft-lbs in continuous duty applications. With nine ratios, rotatable output flanges, remote hydraulic valve options, wet-spline technology, and Chelsea Smart Start options, it is perfect for Vacuum, Refuse, and Fire and Rescue applications in the Mobile market. Markets: Aerial Oil and Gas Defense On-Highway Products Features: Rotatable Flanges to improve clearance Continuous-Duty Torque Rating up to 390 ft-lbs Wet-Spline Option to extend PTO/Pump shaft life Smart Start Option for High-Torque Start-up Two Year Warranty Applications: Fire and Rescue Trucks Pumper Cleaner Truck Cranes Refuse Trucks Performance Characteristics: Mounting Style: 10-Bolt Shift Type: Powershift Hydraulic Standard Output Shaft Size: 1-1/4" Round w/key Continuous Torque Rating (Lbs-ft): 390 Continuous Torque Rating (Nm): 529 Hosepower Rating for Continuous Service: At 500 R.P.M. of Output Shaft (HP): 37 At 500 R.P.M. of Output Shaft (Kw): 28 At 1000 R.P.M. of Output Shaft (HP): 74 At 1000 R.P.M. of Output Shaft (Kw): 56 Approximate Weight: 49 lbs. [22 kg] * Check Application Pages for Actual Torque Ratings Specifications: Mounting Type: Standard Mount 10-Bolt with Metric Studs Gear Ratio: 31/41 Input Type: Allison (Automatically Pressured Lube) Lube Type: Pressure Lube Shift Type: 12V Electric / Hydraulic Assembly Arrangement: Left Side: Bulge Down, Right Side: Bulge Up Output Type: Round Standard Shaft (1.25"-5/16" Key).
2921.38 USD
Chelsea 280GCFJW-B5RK - 280 Series Powershift Hydraulic 10 Bolt Power Take Off
Representative Image - The product image above applies to all Chelsea Series 280 PTOs and is not part specific. Please verify the product using the part number. Chelsea 280 Series is a hydraulically shifted hot shift PTO designed for automatic transmissions with a 10-Bolt aperture, commonly found on Allison and Caterpiller transmissions. The 280 Series replaces the 277/278 Series. Chelsea's 280 Series is a new PTO that delivers high continuous-duty torque in a range of speeds where power and durability are required. It is capable of up to 390 ft-lbs in continuous duty applications. With nine ratios, rotatable output flanges, remote hydraulic valve options, wet-spline technology, and Chelsea Smart Start options, it is perfect for Vacuum, Refuse, and Fire and Rescue applications in the Mobile market. Markets: Aerial Oil and Gas Defense On-Highway Products Features: Rotatable Flanges to improve clearance Continuous-Duty Torque Rating up to 390 ft-lbs Wet-Spline Option to extend PTO/Pump shaft life Smart Start Option for High-Torque Start-up Two Year Warranty Applications: Fire and Rescue Trucks Pumper Cleaner Truck Cranes Refuse Trucks Performance Characteristics: Mounting Style: 10-Bolt Shift Type: Powershift Hydraulic Standard Output Shaft Size: 1-1/4" Round w/key Continuous Torque Rating (Lbs-ft): 390 Continuous Torque Rating (Nm): 529 Hosepower Rating for Continuous Service: At 500 R.P.M. of Output Shaft (HP): 37 At 500 R.P.M. of Output Shaft (Kw): 28 At 1000 R.P.M. of Output Shaft (HP): 74 At 1000 R.P.M. of Output Shaft (Kw): 56 Approximate Weight: 49 lbs. [22 kg] * Check Application Pages for Actual Torque Ratings Specifications: Mounting Type: Standard Mount 10-Bolt with Metric Studs Gear Ratio: 31/41 Input Type: Allison (Automatically Pressured Lube) Lube Type: Pressure Lube Shift Type: 12V Electric / Hydraulic Assembly Arrangement: Left Side: Bulge Down, Right Side: Bulge Up Output Type: Round Standard Shaft (1.25"-5/16" Key).
3330.27 USD
Chelsea 280GMFJW-B5RF - 280 Series Powershift Hydraulic 10 Bolt Power Take Off
Representative Image - The product image above applies to all Chelsea Series 280 PTOs and is not part specific. Please verify the product using the part number. Chelsea 280 Series is a hydraulically shifted hot shift PTO designed for automatic transmissions with a 10-Bolt aperture, commonly found on Allison and Caterpiller transmissions. The 280 Series replaces the 277/278 Series. Chelsea's 280 Series is a new PTO that delivers high continuous-duty torque in a range of speeds where power and durability are required. It is capable of up to 390 ft-lbs in continuous duty applications. With nine ratios, rotatable output flanges, remote hydraulic valve options, wet-spline technology, and Chelsea Smart Start options, it is perfect for Vacuum, Refuse, and Fire and Rescue applications in the Mobile market. Markets: Aerial Oil and Gas Defense On-Highway Products Features: Rotatable Flanges to improve clearance Continuous-Duty Torque Rating up to 390 ft-lbs Wet-Spline Option to extend PTO/Pump shaft life Smart Start Option for High-Torque Start-up Two Year Warranty Applications: Fire and Rescue Trucks Pumper Cleaner Truck Cranes Refuse Trucks Performance Characteristics: Mounting Style: 10-Bolt Shift Type: Powershift Hydraulic Standard Output Shaft Size: 1-1/4" Round w/key Continuous Torque Rating (Lbs-ft): 390 Continuous Torque Rating (Nm): 529 Hosepower Rating for Continuous Service: At 500 R.P.M. of Output Shaft (HP): 37 At 500 R.P.M. of Output Shaft (Kw): 28 At 1000 R.P.M. of Output Shaft (HP): 74 At 1000 R.P.M. of Output Shaft (Kw): 56 Approximate Weight: 49 lbs. [22 kg] * Check Application Pages for Actual Torque Ratings Specifications: Mounting Type: Standard Mount 10-Bolt with Metric Studs Gear Ratio: 31/41 Input Type: Allison (Automatically Pressured Lube) Lube Type: Pressure Lube Shift Type: 12V Electric / Hydraulic Assembly Arrangement: Left Side: Bulge Down, Right Side: Bulge Up Output Type: Round Standard Shaft (1.25"-5/16" Key).
3411.65 USD
Chelsea 272GDHVP-B5RK - 272 Series Power Shift Pneumatic Or Hydraulic 6 Bolt Power Take Off
Representative Image - The product image above applies to all Chelsea Series 272 PTOs and is not part specific. Please verify the product using the part number. Chelsea 272 Series is the most versatile medium duty hot shift PTO on the market. It is available in hydraulic or pneumatic shift with CONTINUOUS torque capabilities up to 300 lbs ft! The 272 Series is a reinvention of our medium duty hot shift PTOs that consolidates the 230, 231, 236, 238, 270, and271 into one series. The moving parts have been upgraded to withstand 300 lbs ft intermittently or continuously. The 272 has (9) speed ratios, (18) shift options, and the most popular direct mount and driveshaft outputs. The direct mount options include Wet-Spline technology (optional) for longer PTO and pump shaft life, while the driveshaft outputs include Smart-Start for high torque start-up conditions. The 272 is the most flexible PTO on the market and it has raised the bar on medium duty hot shift PTOs that are used in the Towing and Recovery, Aerial, Construction Equipment, and Water Truck markets. Markets: Aerial Construction Equipment Defense Material Handling Water Drilling Other Mobile Product Features: Air or Hydraulic Shift Integral Air Valve Rotatable Flanges Continuous-Duty Torque Rating Wet-Spline Option Smart Start Option for High-Torque Start-up Two Year Warranty Applications: Aerial Construction Equipment Water Trucks Towing and Recovery Performance Characteristics: Mounting Style: 6-Bolt Shift Type: PowerShift (Pneumatic or Hydraulic) Standard Output Shaft Size: 1-1/4"" Round w/ 5/16"" Key Continuous Torque Rating (Lbs-ft): 300 Continuous Torque Rating (Nm): 407 Horsepower Rating for Continuous Service At 500 R.P.M. of Output Shaft (HP): 29 At 500 R.P.M. of Output Shaft (Kw): 21 At 1000 R.P.M. of Output Shaft (HP): 57 At 1000 R.P.M. of Output Shaft (Kw): 49 Approximate Weight: 49 lbs. [22 kg] * Check Application Pages for Actual Torque Ratings Specifications: Mounting Type: Metric Stud Kit Gear Ratio: 28/44 Input Gear: 27-Teeth Input Gear, 28-Teeth Ratio Gear, 44-Teeth Output Gear Lube Type: with Pressure Lube Shift Type: 12V Electric / Hydraulic Assembly Arrangement: Left Side: Bulge Down, Right Side: Bulge Up Output Type: Pump Mount, Rotatable SAE "B" 2 or 4-Bolt Flange, SAE "B" Shaft (7/8"-13T).
3134.66 USD
Chelsea 280GGFJR-B3XD - 280 Series Powershift Hydraulic 10 Bolt Power Take Off
Representative Image - The product image above applies to all Chelsea Series 280 PTOs and is not part specific. Please verify the product using the part number. Chelsea 280 Series is a hydraulically shifted hot shift PTO designed for automatic transmissions with a 10-Bolt aperture, commonly found on Allison and Caterpiller transmissions. The 280 Series replaces the 277/278 Series. Chelsea's 280 Series is a new PTO that delivers high continuous-duty torque in a range of speeds where power and durability are required. It is capable of up to 390 ft-lbs in continuous duty applications. With nine ratios, rotatable output flanges, remote hydraulic valve options, wet-spline technology, and Chelsea Smart Start options, it is perfect for Vacuum, Refuse, and Fire and Rescue applications in the Mobile market. Markets: Aerial Oil and Gas Defense On-Highway Products Features: Rotatable Flanges to improve clearance Continuous-Duty Torque Rating up to 390 ft-lbs Wet-Spline Option to extend PTO/Pump shaft life Smart Start Option for High-Torque Start-up Two Year Warranty Applications: Fire and Rescue Trucks Pumper Cleaner Truck Cranes Refuse Trucks Performance Characteristics: Mounting Style: 10-Bolt Shift Type: Powershift Hydraulic Standard Output Shaft Size: 1-1/4" Round w/key Continuous Torque Rating (Lbs-ft): 390 Continuous Torque Rating (Nm): 529 Hosepower Rating for Continuous Service: At 500 R.P.M. of Output Shaft (HP): 37 At 500 R.P.M. of Output Shaft (Kw): 28 At 1000 R.P.M. of Output Shaft (HP): 74 At 1000 R.P.M. of Output Shaft (Kw): 56 Approximate Weight: 49 lbs. [22 kg] * Check Application Pages for Actual Torque Ratings Specifications: Mounting Type: Standard Mount 10-Bolt with Metric Studs Gear Ratio: 31/41 Input Type: Allison (Automatically Pressured Lube) Lube Type: Pressure Lube Shift Type: 12V Electric / Hydraulic Assembly Arrangement: Left Side: Bulge Down, Right Side: Bulge Up Output Type: Round Standard Shaft (1.25"-5/16" Key).
2921.38 USD