Dana Spicer Differential Carrier - Loaded Dana Super 35 - D/S708109
Dana 35 open loaded differential case;Complete assembly with spider gears and cross shaft;For use with 27 spline axle shafts;For use with 3.54 and up gears; California Residents: WARNING Leave nothing to chance replace your broken or worn carrier with this O.E. differential carrier assembly. All components and 100% brand new and built to factory specs.
385.40 USD
Crown Automotive Differential Case - J0947057
Differential Case; California Residents: WARNING Differential Case; w/3.92 And Higher Gear Ratio;
155.99 USD
ARB Differential Shim Driver Set - 0770004
Reduces the risk of damaging carrier bearing shims as they are installed;Comes with a size range to suit most common carrier bearing shim diameters (73mm , 77mm, 82mm, 89mm, 96mm, and 104mm);The set of drivers are joined together as a set for convenience;Zinc plated finish; California Residents: WARNING ARBs Air Locker Shim Driver is a professional automotive differential service tool for installing/servicing common shim pre-loaded differentials. Insufficient carrier bearing pre-load can result in premature bearing failure and ring and pinion failure in all differentials, and possible oil/air leakage issues in an Air Locker differential. Most common Salisbury style axle assemblies (e.g., Dana Spicer model 44) require the pre-load shims to be tapped into place in order to achieve the required pre-load during set-up. Tapping shims into a tight space from a single point on the outside edge of the shim can cause damage to the shim and render it useless, resulting in extra cost and labor to the installation. As part of ARBs new Air Locker Tools range of differential service/installation equipment, ARBs Air Locker Shim Driver is comprised of 6 different sized steel profiles designed to evenly distribute the installation force (from tapping) around the outside edge of a differential shim as it is tapped into place in the assembly. This allows thinner shims to be inserted into tighter places than would be possible without the Shim Driver
74.00 USD
G2 Ford 9 3.062 Bore Aluminum 3rd Member Case - 66-2011BA
3.062 inch bearing journal diameter;28/31 splines;Light weight heat treated T6 Aluminum;Heavy duty support ribbing;Billet steel spanner nuts;Improved pilot bearing support; California Residents: WARNING G2 3rd Member Cases are designed to handle the abuse from ultra high horsepower engines and large tires. Choose from Nodular iron for maximum strength of Aluminum for maximum weight savings.
319.99 USD
G2 Ford 9 3.250 Bore Nodular Iron 3rd Member Case - 66-2011CN
36.25 inch bearing journal diameter;35/40 splines;Heavy duty Noldular Casting;T6 aluminum;Heavy duty support ribbing;Billet steel spanner nuts;Improved pilot bearing support; California Residents: WARNING G2 3rd Member Cases are designed to handle the abuse from ultra high horsepower engines and large tires. Choose from Nodular iron for maximum strength of Aluminum for maximum weight savings.
329.99 USD
Yukon Gear & Axle Model 35 Standard Open Carrier Case - YCD44590
Standard open carrier case;Fits AMC Model 35;3.54 ratio and up only;Does not include spider gears;1.560 side gear bore; California Residents: WARNING Yukon Gear & Axle manufactures a full line of standard open and positraction carrier cases for a variety of applications. The castings and machining are kept to the highest of standards to produce a carrier which provides both high strength and tight tolerances for long life.
237.75 USD
Dana Spicer Dana 30 Open Differential Assembly - 706003X
Dana 30 front;Complete assembly with spider gears and cross shaft;For use with 27 spline axle shafts;For use with 3.54 and down gears; California Residents: WARNING Leave nothing to chance replace your broken or worn carrier with this O.E. differential carrier assembly. All components and 100% brand new and built to factory specs.
176.87 USD
Dana Spicer Dana 44 Track Lok - 708218
Loaded assembly;Front limited slipWith non-rubicon Dana 44 models;For use with 3.73 and down gears;For use in rear applications only;For use with 30 spline axles; California Residents: WARNING Leave nothing to chance replace your broken or worn carrier with this O.E. differential carrier assembly. All components and 100% brand new and built to factory specs.
671.93 USD
Yukon AMC Model 35 3.54-Up Ratio Standard Open Carrier Case with Spider Gears - YCD74054
Standard open carrier case and spiders;Fits AMC Model 35;3.54 and up ratio only; California Residents: WARNING Yukon Gear and Axle manufactures a full line of standard open and Positraction carrier cases for a variety of applications. The castings and machining are kept to the highest of standards to produce a carrier which provides both high strength and tight tolerances for long life.
506.39 USD
Dana Spicer Dana 35 Open Differential Assembly - 75054X
Dana 35;Rear;Complete assembly with spider gears and cross shaft;For use with 1.18 - 27 spline c-clip ABS axle shafts;For use with 3.54 and up gears; California Residents: WARNING Leave nothing to chance replace your broken or worn carrier with this O.E. differential carrier assembly. All components and 100% brand new and built to Dana Spicers demanding specs.
332.12 USD
Dana Spicer Differential Carrier - Unloaded Dana 44 Std. Diff - D/S51256
Dana 44 empty open differential case;For use with 3.92 and down gear ratios;For use with 30 spline axles;Does not include spider gears, cross pins, bearings, washers or shims; California Residents: WARNING Leave nothing to chance replace your broken or worn carrier with this O.E. differential carrier assembly. All components and 100% brand new and built to factory specs.
125.52 USD
Omix-ADA Dana 30 Differential Case Assembly - 16503.05
87-06 Wrangler TJ/YJ;90-01 Cherokee XJ;93-04 Grand Cherokee;76-86 CJ;Dana 30 axle;3.73 and up ratios; California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty.
186.99 USD
Dana Spicer Ford 9Inch Iron 3.250Inch Bore Third Member Case - 10007698
Cast from high strength Nodular Iron;Massive 3.250 bearing bore for aftermarket 35 and 40 Spline axle shafts;Fits Standard pinion support;Billet Spanner nuts for strength;Double rib design for strength; California Residents: WARNING Wherever limits are tested, Dana Spicer is there with products engineered to meet or exceed the needs of off-roaders, racers, and performance enthusiasts. Spicer parts are designed to deliver the strength, and endurance that give performance vehicle drivers a competitive edge. The Spicer third member is one more fine example of this commitment to excellence.
349.99 USD
Jeep Dana 30 JK Standard Differential Case Kit - 68004074AB
2007-11 JK Wrangler and Unlimited;Dana 30;Right hand drive; California Residents: WARNING Factory style replacement part.
888.99 USD
Omix-ADA Dana 44 Differential Case Assembly - 16503.50
03-06 Wrangler TJ/LJ;Dana 44;Track loc; California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty.
872.19 USD
Dana Spicer Differential Carrier - Loaded Dana Super 30 - D/S2002913
Dana 30 open loaded differential case;Complete assembly with spider gears and cross shaft;For use with 27 spline axle shafts;For use with 3.55 and down gears; California Residents: WARNING Leave nothing to chance replace your broken or worn carrier with this O.E. differential carrier assembly. All components and 100% brand new and built to factory specs.
566.99 USD
Crown Automotive Differential Case Assembly - 4741098
Differential Case Assembly; w/3.92 And Higher Gear Ratio; California Residents: WARNING For over 50 years, Crown Automotive has been the leading manufacturer and distributor of replacement parts for Jeep vehicles. With over 8,000 different part numbers, including many factory-discontinued items, we offer you exceptional quality that is only matched by an exceptional warranty.
617.99 USD
Dana Spicer Dana 44 Open Differential Carrier Case - 706024X
Dana 44;Rear;1.31 - 30 axle splines;For use with 3.73 and down gears;Case only no internals; California Residents: WARNING Doing a gear change and need to change to a carrier with a different ring gear landing? Need to replace a broken or worn carrier? Dan Spicer has their O.E. differential carrier cases when replacement of spider gears is not necessary.
131.99 USD
Yukon Ford 9 Nodular Iron Dropout Differential Carrier Case - YPDOF9-2-325
Fits Ford 9;3.250 carrier race diameter;Manufactured from high strength nodular iron; California Residents: WARNING Yukon heavy duty dropouts feature upgraded materials and a larger design than OEM to provide heavy duty strength in racing and off-road applications
543.17 USD
Crown Automotive Dana 44 4.09 Up Differential Case - J8129245
70-75 CJ with 4.09 or higher gear ratio;1986 CJ7 with 4.09 or 4.56 gear ratio;74-79 SJ and J-Series with 4.09 or 4.88 gear ratio;67-73 J-Series Wagoneer and Gladiator with 3.92 or 4.88 gear ratio;Dana 44 rear axle;Standard differential;Includes shims, gasket and ring gear bolts; California Residents: WARNING For over 50 years, Crown Automotive has been the leading manufacturer and distributor of replacement parts for Jeep vehicles. With over 8,000 different part numbers, including many factory-discontinued items, we offer you exceptional quality that is only matched by an exceptional warranty.
155.99 USD
Dana Spicer Dana 60 Track Lok - 707427X
Dana 60;For Use With 4.10 And Down Gears;For Use In Rear Applications Only;For Use With 35 Spline Axles; California Residents: WARNING Leave nothing to chance replace your broken or worn carrier with this O.E. differential carrier assembly. All components and 100% brand new and built to factory specs.
548.27 USD
Yukon Dana 80 4.10-Up Ratio Replacement Standard Open Carrier Case - YCD707230
Standard open carrier case;Fits Dana Spicer 80;4.10 and up ratio only;Does not include spider gears; California Residents: WARNING Yukon Gear and Axle manufactures a full line of standard open and Positraction carrier cases for a variety of applications. The castings and machining are kept to the highest of standards to produce a carrier which provides both high strength and tight tolerances for long life.
458.20 USD
Yukon GM 11.5 Standard Open Carrier Case with Spider Gears - YCG40000278
Standard open carrier case and spiders;Fits GM and Chrysler 11.5; California Residents: WARNING Yukon Gear and Axle manufactures a full line of standard open and Positraction carrier cases for a variety of applications. The castings and machining are kept to the highest of standards to produce a carrier which provides both high strength and tight tolerances for long life.
636.72 USD