Synergy Manufacturing HD Metal on Metal Tie Rod End (7/8-18 LH) - 4131-L
07-18 Wrangler JK, 2 & 4 Door;Left hand thread;4131-L are designed specifically to be used in the following Synergy products: 8000-01 Drag Link (knuckle side only), 8001 Drag Link (knuckle side only), 8002 Tie Rod;Fully greasable sintered metal-on-metal bushing design has high wear resistance;Specially designed grease grooves in the OD of the ball to allow for maximum lubrication;Spring loaded bearing design keeps pressure on bearings and keeps the joint tight as it wears;Forged bearing housing made from 1018 steel for a strong, smooth, bearing surface;Tie Rod End stud made from 4140 steel with an induction heat treated bearing surface for smooth operation and maximum life;Single Plane tie rod ends offer misalignment in one direction of movement only. This eliminates drag link flop on the products they are designed for;Outperforms the factory and all other aftermarket style tie rod ends by offering a larger shank with no stress riser (doesn't neck down at base) and elimination of the nylon ball race;Boots are made from tear/wear resistant black NBR and come with retaining springs;Includes all necessary hardware for installation;Synergy High Performance Grease (4119) is the recommended grease for this product; California Residents: WARNING Synergy Manufacturing is an industry innovator and manufacturer of high-end automotive performance components. These components are predominantly made in the USA and are primarily for the off road aftermarket. Synergy has specialized in the manufacturing and distribution of premium suspension products and systems since 2005. In addition to suspension systems, Synergy also manufactures a complete line of heavy duty steering components, axle upgrades, skid plates, and other related products that dramatically improve vehicle on and off road capability, performance, and appearance. Recent research and development projects have also brought about several new cutting edge products for not just the off road aftermarket but for other motorsports, marine, and transportation applications
50.99 USD
Crown Automotive Tie Rod End - 52088461
99-04 Grand Cherokee WJ;Right knuckle; California Residents: WARNING For over 50 years, Crown Automotive has been the leading manufacturer and distributor of replacement parts for Jeep vehicles. With over 8,000 different part numbers, including many factory-discontinued items, we offer you exceptional quality that is only matched by an exceptional warranty.
31.99 USD
Blue Torch Fabworks XML10-12 Rod End, 5/8 in. - BTFBTF13066
5/8 inch x 3/4 inch;Left hand thread;Kevlar liner;Static load rating of 40,572 lbs.;Sold individually; California Residents: WARNING 5/8 x 3/4 Left Hand Thread Rod End with Kevlar liner. Static Load rating of 40,572 LBS.
17.99 USD
PSC Steering Rod End 3/4-16 X 3/4 Left Hand Male - REXML12
Rod End Style: Spherical bearing;Rod End Attachment: Male threads, eyelet;Thread Pitch: 3/4-16;Thread Type: LH male;Material Type: 4130 chromoly steel;Finish: Anodized;Color: Clear;Hole Diameter: 0.750;Grease Fitting: No; California Residents: WARNING PSC Rod Ends featuring 4130 Chromoly steel bodies with 52100 Spherical Bearings that are precision ground, heat treated, and hard chrome plated. Self-Lubricated by a injection molded Nylafiber matrix extends service life and reduces required maintenance. WARNING: Do Not Lubricate! The rod ends listed above are self-lubricating. Additional lubricants may attract dirt and/or interfere with the self-lubricating properties of the component and may cause accelerated wear. Safety First! Do Not Operate A Vehicle With Worn or Contaminated Rod Ends
25.99 USD
Rubicon Express Low Carbon Rod End - KMX-12
Low Carbon Rod End;Right Hand Thread;Sold individually; California Residents: WARNING 3/4 x 3/4 Right hand thread heim joint. Features a precision ground, heat treated and hard chrome plated ball surrounded by a Teflon/kevlar self lubricating race all encased in a low carbon steel body that is zinc plated for corrosion resistance. Jam nut not included.
25.99 USD
Rugged Ridge Replacement HD Steering Tie Rod - 18050.58
97-06 Wrangler TJ/LJ;84-01 Cherokee XJ;93-98 Grand Cherokee ZJ;Models with 4.0L 6 cylinder engine;Measures 44 inches long;Fits Rugged Ridge HD steering conversion kit, part number 18050.82;Features M22 1.5 2B threads;True DOM tubing with NO seams OR welds;1-1/4 inch OD SAE 1018 steel that is cold rolled to produce a brawny 1/4-inch wall thickness; California Residents: WARNING Beef up your ride with Rugged Ridge HD steering components. This is a bolt-on solution for preventing bent tie rods from wheeling with larger tires. The tubes are 1-1/4 inch OD SAE 1018 steel that is cold rolled to produce a brawny 1/4-inch wall thickness. This is true DOM tubing with NO seams OR welds to potentially fail. The tie rod tube is 44-inches in length and features M22 1.5 2B threads. This is a replacement component for HD Steering Kit 18050.82.
112.99 USD
Crown Tie Rod End Kit - TRK1
Tie Rod End Kit; California Residents: WARNING Tie Rod End Kit; Incl. 1 Inner And 1 Outer Tie Rod End/Jam Nut/Bellows Boot/Clamps/Tie Rod End Nut; Left;
69.99 USD
Rugged Ridge Heavy-Duty Tie Rod - 18050.51
Includes two tie rod ends;Knuckle to knuckle; California Residents: WARNING Beef up your ride with Rugged Ridge steering components. This is a bolt-on solution for preventing bent tie rods from wheeling with larger tires. The tubes are 1-1/4 inch dia. steel that is cold rolled, pierced, and drawn through dies to produce a 1/4 in. wall thickness. This is true DOM tubing with NO seams OR welds to fail. Heavy duty 7/8 inch rod ends feature standard tapered ends to fit stock knuckle applications. You get one ton strength without any modifications to your steering knuckles.
169.99 USD
Rubicon Express Tie Rod End - RM13220
07-18 Wrangler JK, 2 & 4 Door;Left hand drive;For use with part number RE2610; California Residents: WARNING Replace inferior factory tie rod ends with these trail ready units from Rubicon Express.
49.99 USD
Synergy Manufacturing Heavy Duty Metal-on-Metal Tie Rod End - 4131-R
Fully greasable sintered metal on metal bushing design;Tie Rod end boot is made from silicone and polyurethane;7/8-18 UNF RH Thread;Spring loaded bearing design keeps pressure on bearings;Made in the U.S.A; California Residents: WARNING Outperforms the factory and all other aftermarket style tie rod ends by offering a larger shank with no stress riser (doesn't neck down at base) and elimination of the nylon ball race.
50.00 USD
Rugged Ridge Heavy Duty Tie Rod End with Drag Link Connection - 18043.27
7/8 inch shaft;Left hand thread; California Residents: WARNING This spare tie rod end is designed for use with Rugged Ridge's heavy duty tie rods and drag links.
69.99 USD
Rubicon Express Tie Rod End - RM13215
07-18 Wrangler JK, 2 & 4 Door;Right hand thread;For use with part number RE2610; California Residents: WARNING Replace inferior factory tie rod ends with these trail ready units from Rubicon Express.
49.99 USD
Rugged Ridge Heavy-Duty Tie Rods - 18050.54
With narrow track axles;Includes 2 tie rod ends; California Residents: WARNING Beef up your ride with Rugged Ridge steering components. This is a bolt-on solution for preventing bent tie rods from wheeling with larger tires. The tubes are 1-1/4 inch ID steel that is cold rolled, pierced, and drawn through dies to produce a 1/4 in. wall thickness. This is true DOM tubing with NO seams OR welds to fail. Heavy duty 7/8 inch rod ends feature standard tapered ends to fit stock knuckle applications. You get one ton strength without any modifications to your steering knuckles.
173.99 USD
Crown Automotive Tie Rod to Pitman Arm - 52060049AE
07-18 Wrangler JK, 2 & 4 Door;Black;Short tie rod to pitman arm;Sold individually; California Residents: WARNING For over 50 years, Crown Automotive has been the leading manufacturer and distributor of replacement parts for Jeep vehicles. With over 8,000 different part numbers, including many factory-discontinued items, we offer you exceptional quality that is only matched by an exceptional warranty.
41.99 USD
Crown Automotive Steering Tie Rod End - J0932191
71-73 SJ and J-Series;Left tie rod on tie rod tube;3-7/8 inch long;Left hand threads; California Residents: WARNING For over 50 years, Crown Automotive has been the leading manufacturer and distributor of replacement parts for Jeep vehicles. With over 8,000 different part numbers, including many factory-discontinued items, we offer you exceptional quality that is only matched by an exceptional warranty.
23.99 USD
Omix-Ada Tie Rod End - 18043.10
Thread diameter is 7/8 inch;Left hand thread;At pitman arm; California Residents: WARNING Has your tie rod end worn out over time? Tie rod ends are important for correct steering alignment, and a bad tie rod end can cause premature tire wear. Replace it with this7/8-inch diameter tie rod end with left hand threads for better steering.
27.99 USD
PSC Steering Extreme Duty Tie Rod/Drag Link Kit 1.50 - TR110XD
(4) Heavy duty 1 ton tie rod ends;(4) 7/8-18 tube adapters;(7) foot 1-3/8 x 0.150 wall DOM tubing;Jam nuts; California Residents: WARNING This a complete DIY Tie Rod Kit that allows for conversion to Heavy Duty 1 Ton Tie Rod Ends on most Full Hydraulic Steering Kit installations with Dana 60 Axles.
449.99 USD
Omix-ADA Tie Rod End - 18043.11
84-90 Cherokee XJ;86-90 Comanche MJ;Driver side at pitman arm; California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty.
19.99 USD
Crown Automotive Tie Rod End - J0809190
50-68 M38 and M38A1;Left hand; California Residents: WARNING For over 50 years, Crown Automotive has been the leading manufacturer and distributor of replacement parts for Jeep vehicles. With over 8,000 different part numbers, including many factory-discontinued items, we offer you exceptional quality that is only matched by an exceptional warranty.
13.99 USD
Crown Automotive Tie Rod End - 52000599
87-90 Wrangler YJ;84-90 Cherokee XJ;86-90 Comanche MJ;Right hand thread;Passenger side; California Residents: WARNING For over 50 years, Crown Automotive has been the leading manufacturer and distributor of replacement parts for Jeep vehicles. With over 8,000 different part numbers, including many factory-discontinued items, we offer you exceptional quality that is only matched by an exceptional warranty.
15.99 USD
Rubicon Express Low Carbon Rod End - KMX-L12
Low Carbon Rod End;Left Hand Thread;Sold individually; California Residents: WARNING 3/4 x 3/4 Left hand thread heim joint. This heim joint is used in Rubicon Express Track Bars, RE1600 and RE1620. Features a precision ground, heat treated and hard chrome plated ball surrounded by a Teflon/kevlar self lubricating race all encased in a low carbon steel body that is zinc plated for corrosion resistance. Jam nut not included.
21.79 USD
Synergy Heavy Duty Metal-on-Metal Tie Rod End (Left Hand Thread) - 4139-L
Synergy Jeep Heavy Duty Metal-on-Metal Tie Rod Ends;Fully greasable sintered metal-on-metal bushing design has high wear resistance;Specially designed grease grooves in the OD of the ball to allow for maximum lubrication;Spring loaded bearing design keeps pressure on bearings and keeps the joint tight as it wears;Forged bearing housing made from 1018 steel for a strong, smooth, bearing surface;Tie Rod End stud made from 4140 steel with an induction heat treated bearing surface for smooth operation and maximum life;Single Plane tie rod ends offer misalignment in one direction of movement only. This eliminates drag link flop on the products they are designed for;Outperforms the factory and all other aftermarket style tie rod ends by offering a larger shank with no stress riser (doesn't neck down at base) and elimination of the nylon ball race;Boots are made from tear/wear resistant black NBR and come with retaining springs;Includes all necessary hardware for installation; California Residents: WARNING Synergy Manufacturing is an industry innovator and manufacturer of high-end automotive performance components. These components are predominantly made in the USA and are primarily for the off road aftermarket. Synergy has specialized in the manufacturing and distribution of premium suspension products and systems since 2005. In addition to suspension systems, Synergy also manufactures a complete line of heavy duty steering components, axle upgrades, skid plates, and other related products that dramatically improve vehicle on and off road capability, performance, and appearance. Recent research and development projects have also brought about several new cutting edge products for not just the off road aftermarket but for other motorsports, marine, and transportation applications
50.99 USD
Rugged Ridge Heavy Duty Tie Rod End - 18043.26
7/8 inch shaft;Right hand thread; California Residents: WARNING This spare tie rod end is designed for use with Rugged Ridge's heavy duty tie rods and drag links.
69.99 USD
Crown Automotive Tie Rod End - 5072444AA
02-07 Liberty KJ;Passenger side; California Residents: WARNING For over 50 years, Crown Automotive has been the leading manufacturer and distributor of replacement parts for Jeep vehicles. With over 8,000 different part numbers, including many factory-discontinued items, we offer you exceptional quality that is only matched by an exceptional warranty.
31.99 USD
Synergy Manufacturing Heavy Duty Metal on Metal Tie Rod End - 4135-L
97-06 Wrangler TJ/LJ;84-01 Cherokee XJ;93-96 Grand Cherokee;Left hand thread;Fully greasable sintered metal on metal bushing design has high wear resistance;Specially designed grease grooves in the OD of the ball to allow for maximum lubrication;Forged bearing housing made from 1018 steel for a strong, smooth, bearing surface;Tie Rod end boot is made from tear/wear resistant material made from silicone & polyurethane; California Residents: WARNING Outperforms the factory and all other aftermarket style tie rod ends by offering a larger shank with no stress riser (doesn't neck down at base) and elimination of the nylon ball race.
50.00 USD
Synergy Manufacturing Tie Rod End Adapter - 8000-02
JK models;Adapter is designed to flip the taper on the steering knuckle;Eliminates the need for reaming the knuckle to the correct taper;CNC machined from 303 stainless steel;Designed only to be used with 4131-L tie rod end;Sold Individually; California Residents: WARNING Jeep JK TRE Flip Adapter 7/8 Inch hole Synergy MFG. Synergy Steering Correction Kit (8011) requires the drag link to be flipped to the top of the steering knuckle for increased ground clearance and to correct steering geometry on lifted Jeep JKs
20.00 USD
Crown Automotive Drag Link Tie Rod to Right Knuckle - 52006592
91-01 Cherokee XJ;Does not include adjuster sleeve or pitman arm tie rod end; California Residents: WARNING For over 50 years, Crown Automotive has been the leading manufacturer and distributor of replacement parts for Jeep vehicles. With over 8,000 different part numbers, including many factory-discontinued items, we offer you exceptional quality that is only matched by an exceptional warranty.
74.99 USD
Crown Automotive Steering Tie Rod End - J5350570
72-86 CJ;Tie rod end at pitman arm;Drag link;20.83 inches long; California Residents: WARNING For over 50 years, Crown Automotive has been the leading manufacturer and distributor of replacement parts for Jeep vehicles. With over 8,000 different part numbers, including many factory-discontinued items, we offer you exceptional quality that is only matched by an exceptional warranty.
48.99 USD
Omix-ADA Tie Rod End - 18044.02
07-18 Wrangler JK, 2 & 4 Door;Passenger side knuckle to tie rod; California Residents: WARNING Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty.
76.99 USD
Crown Automotive Tie Rod End - J8136674
41-86 CJ;With left hand thread;Passenger side; California Residents: WARNING For over 50 years, Crown Automotive has been the leading manufacturer and distributor of replacement parts for Jeep vehicles. With over 8,000 different part numbers, including many factory-discontinued items, we offer you exceptional quality that is only matched by an exceptional warranty.
12.99 USD