Phillips Industries 8-7133 - Terminal Protector Right Elbow, 1/0 And 3/0 Gauge, Black
Terminal Protectors Protects alternator and electrical system from shorts Reduces the risk or battery explosion caused by sparks High temperature PVC construction rated at 90C (190F) Color-coded for easy polarity identification.
12.73 USD
Phillips Industries 8-7143 - Terminal Protector Flag Clamp, 1/0 And 2/0 Gauge, Black
Terminal Protectors Protects alternator and electrical system from shorts Reduces the risk or battery explosion caused by sparks High temperature PVC construction rated at 90C (190F) Color-coded for easy polarity identification.
9.41 USD
Phillips Industries 12-4546 - Swinger Gladhands 45 With Cast Iron Service Gladhand, Blue, 3/8 Female Pipe Thread, Bottom Port
Swinger Gladhands GLADHAND SWIVELS 180WITHOUT KINKING AIR LINE! When not in use, gladhand is automatically returned to seal, protecting the air lines Designed for intermodal and piggy-back trailers where straight or angled gladhands are exposed Anodized for increased protecting against magnesium chloride, road salt and chemicals Inner seal prevents dirt and insects from entering the air brake system Stainless steel return spring for long life.
76.58 USD
Phillips Industries 11-3110 - Air Brake Coil Power Grip, 12 Ft., Blue, Service Coil Only
POWER GRIP POWER GRIP gladhand extension provides superior coupling/uncoupling leverage Includes thread seal for secure connection to gladhand and chassis Single piece trailer side and three-piece swivel tractor side fittings Remains flexible at -40F (-40C) Meets SAE J844 and J1131 specifications Meets DOT 49 CFR FMVSS 571.106 specifications Meets DOT 49 CFR FMVSS 393.45 specifications As a recommended practice, use a tracker bar spring kit or pogo stick to support cable assemblies with longer leads * Working length - As measured by pull force per SAE J2222. Length of actual cable is significantly longer.
57.74 USD
Phillips Industries 1-2265 - Butt Connector Nylon, 8 Ga., Red, Polybag
Butt Connector - Insulated Nylon, 8 ga.,, Polybag.
52.00 USD
Phillips Industries 1-1921 - Sta Dry Crimp & Seal Ring Terminals 16 14 Ga., #6 Stud Size, 25 Pcs., Bag, Blue
STA-DRY CRIMP & SEAL RING TERMINALS Crimp provides mechanical reliability for excellent conductivity Seal prevents wire corrosion ... Keeps out moisture and road salts RoHS compliant *Heat Required.
0.85 USD
Phillips Industries 8-4175 - Starter / Ground Lug 3/0 Ga., 1/2
Starter / Ground Lug Wider and thicker pad for better electrical conductivity and greater strength than standard lugs Copper battery lugs are tin plated for added conductivity and corrosion resistance Exceeds SAE standards and conforms to TMC and ATA recommended practices Meets UL standard (UL Std. 486A) Lugs for every application.
9.95 USD
Phillips Industries 8-7132 - Terminal Protector Right Elbow, 1/0 And 3/0 Gauge, Red
Terminal Protectors Protects alternator and electrical system from shorts Reduces the risk or battery explosion caused by sparks High temperature PVC construction rated at 90C (190F) Color-coded for easy polarity identification.
12.73 USD
Phillips Industries 1-1957 - Sta Dry Crimp & Seal Slip On Terminal 12 10 Ga., Male, 0.250, 25 Pcs., Bag, Yellow
STA-DRY CRIMP & SEAL SLIP-ON TERMINALS Crimp provides mechanical reliability for excellent conductivity Seal prevents wire corrosion ... Keeps out moisture and road salts RoHS compliant *Heat Required.
1.17 USD
Phillips Industries 8-4365 - 45 Tin Plated Battery Lug 2/0 Ga., 1/2
45 Lugs 45 Lugs 1/2" Wider and thicker for better electrical conductivity and greater strength than standard lugs Copper battery lugs are tin plated for added conductivity and corrosion resistance Exceeds SAE standards and conforms to TMC and ATA recommended practices MEETS UL standard (UL Std. 486A) Lugs for every application.
8.82 USD
Phillips Industries 11-3100 - Air Brake Coil Power Grip, 12 Ft., Red, Emergency Coil Only
POWER GRIP POWER GRIP gladhand extension provides superior coupling/uncoupling leverage Includes thread seal for secure connection to gladhand and chassis Single piece trailer side and three-piece swivel tractor side fittings Remains flexible at -40F (-40C) Meets SAE J844 and J1131 specifications Meets DOT 49 CFR FMVSS 571.106 specifications Meets DOT 49 CFR FMVSS 393.45 specifications As a recommended practice, use a tracker bar spring kit or pogo stick to support cable assemblies with longer leads * Working length - As measured by pull force per SAE J2222. Length of actual cable is significantly longer.
57.74 USD
Phillips Industries 8-2065 - Non Insulated Brazed Seam Lugs 2/0 Ga., 1/2
Brazed Seam Lugs - Non-Insulated Serrated barrel increases pull-out strength 100% copper, tin plated Cost effective solution.
6.05 USD