Rough Country 1.25 Body Lift - RC614
Wrangler JL, 2 & 4 Door;Increased ground clearance;Provides 1.25 of lift opposed to the standard 1;Includes rear bumper brackets;Pucks are made from fiberglass reinforced nylon for superior strength and durability;Does NOT fit manual transmission models;Rear bumper brackets ONLY work with standard factory bumper; California Residents: WARNING Give your JL a boost with Rough Country's 1.25in Body Lift Kit! This all-inclusive kit comes with everything you need for additional ground clearance while providing your vehicle with a more interesting look. The included 1.25 spacers nest with the factory body mounts, keeping the body properly aligned with the frame. This design provides lift while retaining the noise and vibration canceling characteristics of the factory mounts. A set of driver and passenger side rear bumper brackets allow you to relocate the rear bumper upwards, keeping a flush, consistent look even after lifting. Rough Country's 1.25in Body Lift Kit includes a Lifetime Replacement Guarantee.
89.95 USD
Mountain Off Road Enterprises 1 Inch Body Lift - BLTJ97S
97-06 Wrangler TJ/LJ;6061 T-6 aluminum;All transmissions;Body mounts included;Includes hardware; California Residents: WARNING Do you have BIG tires that just barely rub the fenders of your Jeep? Lift the body away just a little (one inch) with these solid Pucks. Made from aircraft quality 6061 T-6 aluminum, they will not crush, break or move around once bolted in place. No plastic parts to look cheap or break under load. Natural aluminum color looks great under your rig, or you can paint or anodized them, if you desire. Dimensions: 2-1/4 in diameter, 1 tall, and have a 1/2 hole size. Includes polyurethane body mounts.
306.75 USD
Daystar 1 Inch Body Lift Kit - KJ04508BK
97-06 Wrangler TJ/LJ;Black bushings;Everything you need to lift the body 1 inch;Improves fit of oversized tires;Maintains proper frame body alignment;Increases performance and handling characteristics;All necessary hardware included;Limited lifetime warranty;Made in the USA; California Residents: WARNING Daystars Body Lift Kits are more than just spacer blocks placed on top of factory mounts! Instead, these are complete replacement body mounts with an additional 1 inch of height, which raises the body 1 inch. Daystars body lift kits use a special blend of Polyurethane that is resistant to vehicle fluids and road grime while keeping the body isolated from chassis noise and vibration. These mounts keep the body properly aligned with the frame and include all the necessary hardware for installation. Daystar Body Lifts are perfect for modifications such as high-clearance skid plates (belly-up kits), engine conversions, and applications that need a little more room for larger tires and wheels. Since the body is relocated 1 inch, no other modifications are needed to items such as fuel filler necks, wiring, and the steering sector shaft. Transfer case linkage brackets are included on some applications. Depending on vehicle age it is a good idea to inspect these and other components and replace any items that show evidence of wear or cracking.
170.00 USD
Mountain Off Road Enterprises 1 Inch Body Lift - BLTJ97
97-06 Wrangler TJ/LJ;6061 T-6 aluminum;All transmissions;Includes hardware; California Residents: WARNING Do you have BIG tires that just barely rub the fenders of your Jeep? Lift the body away just a little (one inch) with these solid Pucks. Made from aircraft quality 6061 T-6 aluminum, they will not crush, break or move around once bolted in place. No plastic parts to look cheap or break under load. Natural aluminum color looks great under your rig, or you can paint or anodized them, if you desire. Dimensions: 2-1/4 in diameter, 1 tall, and have a 1/2 hole size.
196.33 USD
Rough Country 2 Jeep Body Lift Kit - RC612
For models with manual transmission;Easy bolt-on installation;Increased ground clearance;No exhaust modifications required;Includes Grade 8 hardware;Body lift pucks are made from fiberglass reinforced nylon for superior strength and durability;Does NOT fit automatic transmission models; California Residents: WARNING Body lifts such as these are perfect for belly-up kits, engine conversions, or any other application that needs a little more room. These TJ Body Lift Kits include Grill Support Brackets, Radiator Support Brackets, Steering Spacer and Strap, Overflow Extension, and Fuel Filler Extensions and Shift Control Brackets for automatic transmissions. Manual versions include Shifter Extensions. These kits fit both manual and automatic equipped Jeep TJ's and requires no cutting or modification to the exhaust. Durable Grade 8 Hardware included.
139.95 USD
Mountain Off Road Enterprises 1 Inch Body Lift - BLYJ8795
87-95 Wrangler YJ;6061 T-6 aluminum;5 speed transmission;Includes hardware; California Residents: WARNING Do you have BIG tires that just barely rub the fenders of your Jeep? Lift the body away just a little (one inch) with these solid Pucks. Made from aircraft quality 6061 T-6 aluminum, they will not crush, break or move around once bolted in place. No plastic parts to look cheap or break under load. Natural aluminum color looks great under your rig, or you can paint or anodized them, if you desire. Dimensions: 2-1/4 in diameter, 1 tall, and have a 1/2 hole size.
160.80 USD
Daystar 1 Inch Body Lift Kit - PA951
97-06 Wrangler TJ/LJ;4WD model;1 inch body lift;No bumper brackets included;Allows use of larger diameter tires and factory rims;Fiberglass reinforced nylon body blocks;High strength hardware included;Made in the U.S.A.; California Residents: WARNING Performance Accessories one inch Body Lift Kit PN-951 is one of the most popular ways to regain the ride height and tire clearance on Jeeps with the added weight of upgraded bumpers, winch and spare tire carriers. The body-lift is easy to install and raises the vehicle without altering the factory or aftermarket suspension systems. The kit includes high pressure fiberglass reinforced nylon lift blocks, and high strength hardware.
152.00 USD
Rough Country 1 Jeep Body Lift Kit - RC607
Easy bolt-on installation;Increased ground clearance;No exhaust modifications required;Includes grade 8 hardware;Body lift pucks are made from fiberglass reinforced nylon for superior strength and durability; California Residents: WARNING Rough Country's innovative new 1 Polyurethane Body Lift reduces chassis noise and vibration, featuring specially blended Polyurethane bushings that are resistant to fluids and road grime. Kit includes Grill Support Brackets, Shift Control Bracket for automatic transmissions and durable Grade 8 Hardware. Notes: Does NOT fit 05-06 6-speed manual transmission models.
159.95 USD
Daystar 1 Inch Body Lift Kit - KJ04505BK
87-95 Wrangler YJ;Black bushings;Everything you need to lift the body 1;Improves fit of oversized tires;Maintains proper frame body alignment;Increases performance and handling characteristics;All necessary hardware included;Limited lifetime warranty;Made in the USA; California Residents: WARNING Daystars Body Lift Kits are more than just spacer blocks placed on top of factory mounts! Instead, these are complete replacement body mounts with an additional 1 inch of height, which raises the body 1 inch. Daystars body lift kits use a special blend of Polyurethane that is resistant to vehicle fluids and road grime while keeping the body isolated from chassis noise and vibration. These mounts keep the body properly aligned with the frame and include all the necessary hardware for installation. Daystar Body Lifts are perfect for modifications such as high-clearance skid plates (belly-up kits), engine conversions, and applications that need a little more room for larger tires and wheels. Since the body is relocated 1 inch, no other modifications are needed to items such as fuel filler necks, wiring, and the steering sector shaft. Transfer case linkage brackets are included on some applications. Depending on vehicle age it is a good idea to inspect these and other components and replace any items that show evidence of wear or cracking.
170.00 USD
Daystar 2 Inch Body Lift Kit - PA992
07-11 Wrangler JK, 2 & 4 Door;Auto transmission;2 inch body lift;No bumper brackets included;Allows use of 33-inch diameter tires and factory rims;Fiberglass reinforced nylon body blocks;CNC Machined steering extension;High strength hardware included;Made in USA; California Residents: WARNING The Performance Accessories 992 Body Lift Kit is a popular method to raise Jeep Wrangler JK by providing two-inches of additional lift and allowing the use of up to 33-inch diameter tires. This kit includes all the necessary components to raise the vehicle in 3 to 4 hours. This kit includes high pressure fiberglass reinforced nylon lift blocks, steering extension and all the necessary hardware.
152.00 USD
Daystar 2 Inch Body Lift Kit - PA994
12-18 Wrangler JK, 2 & 4 Door;Auto transmission;2 inch body lift;Allows use of 33-inch diameter tires and factory rims;Fiberglass reinforced nylon body blocks;Steering Extension;Ground strap brackets;High strength hardware included;Made in the USA; California Residents: WARNING The Performance Accessories 994 Body Lift Kit is a popular method to raise Jeep Wrangler JK by providing two-inches of additional lift and allowing the use of up to 33-inch diameter tires. This kit includes all the necessary components to raise the vehicle in 3 to 4 hours. This kit includes high pressure fiberglass reinforced nylon lift blocks, steering extension, ground strap brackets and all the necessary hardware.
141.00 USD
Daystar 1 Inch Body Lift Kit - PA993
12-18 Wrangler JK, 2 & 4 Door;1 inch body lift;Allows use of 33-inch diameter tires and factory rims;Fiberglass reinforced nylon body blocks;Ground strap bracket;High strength hardware included;Made in the USA; California Residents: WARNING The Performance Accessories 993 Body Lift Kit is a popular method to raise Jeep Wrangler JK by providing one-inches of additional lift and allowing the use of up to 33-inch diameter tires. This kit includes all the necessary components to raise the vehicle in 3 to 4 hours. This kit includes high pressure fiberglass reinforced nylon lift blocks, ground strap bracket and all the necessary hardware.
97.99 USD
Daystar 3 Inch Body Lift Kit - PA913
72-86 CJ5 and Scrambler CJ8;4WD models;3 inch body lift;No bumper brackets included;Allows use of 33-inch diameter tires and factory rims;Fiberglass reinforced nylon body blocks;Laser cut and zinc plated brackets;High strength hardware included;Made in USA; California Residents: WARNING The Performance Accessories 913 Body Lift Kit is a popular method to raise CJ-5/CJ-7 Scrambler by providing 3-inches of additional lift and allowing the use of up to 33-inch diameter tires. This kit includes all the necessary components to raise the vehicle in 3 to 4 hours. This kit includes high pressure fiberglass reinforced nylon lift blocks, Clutch pivot bracket.
152.00 USD
Rough Country 3 Jeep Body Lift Kit - RC606
For models with auto transmission;Easy bolt-on installation;Increased ground clearance;No exhaust modifications required;Includes grade 8 hardware;Body lift pucks are made from fiberglass reinforced nylon for superior strength and durability; California Residents: WARNING Body lifts such as these are perfect for belly-up kits, engine conversions, or any other application that needs a little more room. These TJ Body Lift Kits include Grill Support Brackets, Radiator Support Brackets, Steering Spacer and Strap, Overflow Extension, and Fuel Filler Extensions and Shift Control Brackets for automatic transmissions. Manual versions include Shifter Extensions. These kits fit both manual and automatic equipped Jeep TJ's and requires no cutting or modification to the exhaust. Durable Grade 8 Hardware included. Notes: Does NOT fit manual transmission models.
159.95 USD
Rugged Ridge 3 Inch Body Lift Kit - 18303.10
Black;Manual or automatic transmission;Will allow you to fit up to 33 inch tires; California Residents: WARNING 3-inch body lift kit fits 97-04 Jeep Wrangler TJ with a manual transmission and 97-06 Jeep Wrangler TJ with an automatic transmission.
184.99 USD
Rough Country 1.25 Jeep Body Lift Kit - RC601
07-18 Wrangler JK, 4-Door;For models with auto transmission;Increased ground clearance;Most complete JK body lift kit on the market!;Provides 1.25 of lift opposed to the standard 1;Includes rear bumper brackets;Body lift pucks are made from fiberglass reinforced nylon for superior strength and durability; California Residents: WARNING This Rough Country Body Lift provides a full 1.25 of additional tire clearance, as opposed to the standard 1 provided by most other manufacturers. The 1.25 spacers nest with the factory body mounts keeping the body properly aligned with the frame. This design provides lift while retaining the noise and vibration canceling characteristics of the factory mounts. The new shifter adapter allows you to run any 1 or 1.25 body lift on a JK with a manual transmission without having to cut the inner shift boot. It also gives you back the lost shifter length due to the body being raised away from the frame. Notes: Does NOT fit 2-door models. Does NOT fit manual transmission models. Does NOT fit Moab Edition models. Rear bumper brackets ONLY work with standard factory bumper.
109.95 USD