Daystar Switch Panel with 4 Switches (Tan) - KJ71038TN
For the 2011 year model, Jeep significantly upgraded the Wrangler JKs interior. Unfortunately, this means that Daystars popular Switch Panel for the older Wrangler JK no longer works. So, the engineers at Daystar set out to design an all new switch panel that would work in the new Wrangler JKs interior. Daystars all NEW Switch Panel places up to 5 rockers switches for running compressors, winches, lights, etc. in the ideal location, right in front of the shifter. Plus, installation is simple and utilizes the factory clips. The all NEW Daystar Switch Panel matches the 11-12 JKs dash texture and is available in two colors, black (BK) and tan (TN). Twenty Amp marine-grade rocker switches are available separately. Kit Includes 1 red, 1 blue, 1 amber & 1 green switch. 07-18 Wrangler JK, 2 & 4 Door;Tan;Lower;Automatic transmission only;Made in the U.S.A; California Residents: WARNING
70.99 USD
Painless Wiring Trail Rocker Winch Control Add-On - 57150
This switch allows for in-cab operation of many name brand winches with your Painless Performance Trail Rocker. The switch features a momentary on/off/on operation along with custom engraved winch controls on it. Installation is as simple as removing one of your old switches and installing this one in its place. Your Trail Rocker kit comes with winch control wires preinstalled for you at the switch panel and coming out of the fuse/relay center. Connect these wires to your new switch and the other end to your winch for a painless wiring job. Winch control switch to add to your Trail Rocker;Momentary on/off/on operation;Custom engraved winch controls on it; California Residents: WARNING
25.99 USD
SPOD Modular BantamX with LED 8-Switch Panel and 84 Battery Cables (Red) - BX-MOD-84-R
The BantamX will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone. Features: BantamX Modular w/ Red LED with 84 Inch battery cables Fully programmable, digital controlled system 8 circuits rated at 30 amps at 12.5 VDC per circuit 16-position terminal block (easily attach accessories) 2 controller ports (RJ45) for Ethernet cables Integrated low voltage cutoff (LVCO) battery protection w/ optional override One ATM mini-style fuse for LVCO protection and reset Failsafe self-healing fault protection system (from 1.5 to 30amps) Current-sensing MOSFETs controlled by a microprocessor (no fuses and relays) 50amp auto-resetting circuit breaker Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket Operates on 12VDC or 24VDC 8-position input terminal block for controlling outputs Built-in Bluetooth capabilities for remote control Protection against: overheating, over-current, shorts, reverse polarity and field collapse Ignition control and safety lock-out for switches 1 and 2 (optional) Up to 4 BantamX units can be daisy chained and controlled by one Touchscreen On-demand wireless software updates/upgrades Hardware: Powder coated steel base w/ built in hardware Silicone gasket for weatherproofing Aluminum lid Vehicle specific mounting options Robust insulated ba Universal application;Red LEDs;Fully programmable, digital controlled system;8 circuits rated at 30 amps at 12.5 VDC per circuit;16-position terminal block (easily attach accessories);2 controller ports (RJ45) for Ethernet cables;Integrated low voltage cutoff (LVCO) battery protection with optional override;One ATM mini-style fuse for LVCO protection and reset;Failsafe self-healing fault protection system (from 1.5 to 30amps);Current-sensing MOSFETs controlled by a microprocessor (no fuses and relays);50amp auto-resetting circuit breaker;Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket;Operates on 12VDC or 24VDC;8-position input terminal block for controlling outputs;Built-in Bluetooth capabilities for remote control;Protection against: overheating, over-current, shorts, reverse polarity and field collapse;Ignition control and safety lock-out for switches 1 and 2 (optional);Up to 4 BantamX units can be daisy chained and controlled by one Touchscreen;On-demand wireless software updates/upgrades;1-year limited warranty; California Residents: WARNING
910.00 USD
Advanced Accessory Concepts 4 Channel Trigger Plus - 2100
While you love modding your Jeep or truck, what you may not love so much is the hassle of getting everything connected while still keeping your vehicle safe. The last thing you need is a safety hazard such as wires bristling everywhere when you're rocking and reeling over rough terrain, when the slightest snag could pull your accessories free and even kill your ride, or possibly cause danger from loose electrical components. With that in mind, Advanced Accessory Concepts has been making components to simplify your electrical connections, and effectively maintain vehicle safety. With AAC trigger accessory control systems and AAC switch pods, you no longer need to run wires under the dash or through a vehicle firewall to hook up your accessories. AAC's trigger control systems come with a universal mount battery-powered RF remote, phone and tablet Bluetooth control and manual on/off switches easily accessible from the top of the case. As an Advance Accessory Concepts retailer, we also carry a wide range of Y connector harnesses from 6 to 36, not to mention extension connectors, overhead switch panels and connector kits. Control up to 24 accessories;Eliminate the need to run wires under the dash or through the firewall of a vehicle when wiring accessories;4 channel 2x30 amp relays, 2x10 amp relays, All solid state, 12-24 volt;Battery powered RF remote with universal mount system;Bluetooth control from phone/tablet app, will allow to dim and strobe light, monitor battery level;Manual buttons for on/off on top of case;12 volt input, 3 wires, ground, switched positive, battery positive;12 volt out with waterproof connectors;Fuse's built in, waterproof cover (30 amp -1 and 2, 10 amp - 3 and 4);LED's to indicate relay on and if the fuse is blown;Waterproof case design, withstands temps to 250 degrees;Waterproof connectors included on both the control box and the harnesses;Can hard wire conventional switches via optional din port harness;External antennas for extended range and security;Comes with (4) 8' universal wiring harnesses; California Residents: WARNING
301.99 USD
SPOD SourceLT with Genesis Adapter LED 6-Switch Panel (Red) - SL-G0918-JK-R
The SourceLT will save hours of wiring and installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone. Features: SourceLT w/ Genesis Adapter and Red LED Switch Panel for JK 2009-2018 LED Color: Red 6 circuits rated at 30 amps at 12.5 VDC per circuit 12-position terminal block (easily attach accessories) Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller Integrated low voltage cutoff (LVCO) battery protection w/ optional override Self-healing fault protection circuits (from 1.5 to 30amps) Current-sensing MOSFETs controlled by a microprocessor (no fuses and no relays) 50amp auto-resetting circuit breaker Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket Operates on 12VDC Built-in Bluetooth capabilities for remote control Protection against: overheating, over-current, shorts, reverse polarity and field collapse On-demand wireless software updates/upgrades Hardware: Powder coated steel base w/ built in hardware Silicone gasket for weatherproofing Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends Universal and vehicle specific mounting options Robust insulated base and cover Features Available Through sPOD Mobile App (free): Each switch can be programmed for: Dimming Strobe California Residents: WARNING
605.00 USD
Daystar A-Pillar Switch Pod - KJ71044BK
Daystar A-Pillar Switch Pods make adding switches for electrical accessories easier than ever before! A direct replacement for factory a-pillar, installation is a simple remove-and-replace operation. There is simply no cleaner or easier way to add switches to your Jeep. 4 high-quality rocker switches are included. These 20-amp three-pole rocker switches come illuminated in four colors: red, green, blue, and amber. A-Pillar Switch Pod;Includes 4 Rocker Switches;20 Amp;3 Pole;Color: Black; California Residents: WARNING
75.99 USD
SPOD SourceLT with Genesis Adapter LED 6-Switch Panel (Blue) - SL-G0918-JK-B
The SourceLT will save hours of wiring and installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone. Features: SourceLT w/ Genesis Adapter and Blue LED Switch Panel for JK 2009-2018 LED Color: Blue 6 circuits rated at 30 amps at 12.5 VDC per circuit 12-position terminal block (easily attach accessories) Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller Integrated low voltage cutoff (LVCO) battery protection w/ optional override Self-healing fault protection circuits (from 1.5 to 30amps) Current-sensing MOSFETs controlled by a microprocessor (no fuses and no relays) 50amp auto-resetting circuit breaker Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket Operates on 12VDC Built-in Bluetooth capabilities for remote control Protection against: overheating, over-current, shorts, reverse polarity and field collapse On-demand wireless software updates/upgrades Hardware: Powder coated steel base w/ built in hardware Silicone gasket for weatherproofing Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends Universal and vehicle specific mounting options Robust insulated base and cover Features Available Through sPOD Mobile App (free): Each switch can be programmed for: Dimming Strobe California Residents: WARNING
605.00 USD
SPOD Modular SourceLT LED 6-Switch Panel with 36 Battery Cables (Red) - SL-MOD-84-R
The SourceLT will save hours of wiring and installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone. Features: SourceLT Modular w/ Red LED for Uni with 84 Inch battery cables 6 circuits rated at 30 amps at 12.5 VDC per circuit 12-position terminal block (easily attach accessories) Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller Integrated low voltage cutoff (LVCO) battery protection w/ optional override Self-healing fault protection circuits (from 1.5 to 30amps) Current-sensing MOSFETs controlled by a microprocessor (no fuses and no relays) 50amp auto-resetting circuit breaker Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket Operates on 12VDC Built-in Bluetooth capabilities for remote control Protection against: overheating, over-current, shorts, reverse polarity and field collapse On-demand wireless software updates/upgrades Hardware: Powder coated steel base w/ built in hardware Silicone gasket for weatherproofing Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends Universal and vehicle specific mounting options Robust insulated base and cover Features Available Through sPOD Mobile App (free): Each switch can be programmed for: Dimming Strobe Flash Momentar Universal application;Red LEDs;84 battery cables;6 circuits rated at 30 amps at 12.5 VDC per circuit;12-position terminal block (easily attach accessories);Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller;Integrated low voltage cutoff (LVCO) battery protection with optional override;Self-healing fault protection circuits (from 1.5 to 30amps);Current-sensing MOSFETs controlled by a microprocessor (no fuses and no relays);50amp auto-resetting circuit breaker;Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket;Operates on 12VDC;Built-in Bluetooth capabilities for remote control;Protection against: overheating, over-current, shorts, reverse polarity and field collapse;On-demand wireless software updates/upgrades;1-year limited warranty; California Residents: WARNING
543.00 USD
Painless Performance Trail Rocker Relay Center (Customizable) - 57100
Introducing the brand new Customizable Trail Rocker from Painless, allowing you to control up to eight accessories on your custom application! The heart of this kit is enclosed in the weatherproof housing that surrounds the power center with eight fuses and relays. The power center then provides you with all the necessary wiring to connect to any 12v accessory ranging from lights to air lockers. Easily installed with our detailed instructions and plug-n-play design. Also provided is a switch input harness for controlling all of your accessories. Simply wire these connections into your own switches. Winch Ready! The Trail Rocker system includes dedicated wires for controlling a winch. Purchase of our Winch Control Add-on Kit part number 57150 is required for operation. Universal application;Control up to 8 accessories, (8) 30 amp fuses and (8) 30 amp relays;Weatherproof housing around the power center;Allows for custom mounting;Allows for wiring in your own switches; California Residents: WARNING
339.99 USD
SPOD SourceLT LED 6-Switch Panel (Blue) - SL-03-TJ-B
The SourceLT will save hours of wiring and installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone. Features: SourceLT w/ Blue LED Switches for 2003-2006 TJ/LJ 6 circuits rated at 30 amps at 12.5 VDC per circuit 12-position terminal block (easily attach accessories) Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller Integrated low voltage cutoff (LVCO) battery protection w/ optional override Self-healing fault protection circuits (from 1.5 to 30amps) Current-sensing MOSFETs controlled by a microprocessor (no fuses and no relays) 50amp auto-resetting circuit breaker Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket Operates on 12VDC Built-in Bluetooth capabilities for remote control Protection against: overheating, over-current, shorts, reverse polarity and field collapse On-demand wireless software updates/upgrades Hardware: Powder coated steel base w/ built in hardware Silicone gasket for weatherproofing Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends Universal and vehicle specific mounting options Robust insulated base and cover Features Available Through sPOD Mobile App (free): Each switch can be programmed for: Dimming Strobe Flash Momentary Swit 03-06 Wrangler TJ/LJ;Blue LEDs;6 circuits rated at 30 amps at 12.5 VDC per circuit;12-position terminal block (easily attach accessories);Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller;Integrated low voltage cutoff (LVCO) battery protection with optional override;Self-healing fault protection circuits (from 1.5 to 30amps);Current-sensing MOSFETs controlled by a microprocessor (no fuses and no relays);50amp auto-resetting circuit breaker;Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket;Operates on 12VDC;Built-in Bluetooth capabilities for remote control;Protection against: overheating, over-current, shorts, reverse polarity and field collapse;On-demand wireless software updates/upgrades;1-year limited warranty; California Residents: WARNING
640.00 USD
SPOD SourceLT with Genesis Adapter LED 6-Switch Panel (Amber) - SL-G0708-JK-A
The SourceLT will save hours of wiring and installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone. Features: SourceLT w/ Genesis Adapter and Amber LED Switch Panel for JK 2007-2008 LED Color: Amber 6 circuits rated at 30 amps at 12.5 VDC per circuit 12-position terminal block (easily attach accessories) Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller Integrated low voltage cutoff (LVCO) battery protection w/ optional override Self-healing fault protection circuits (from 1.5 to 30amps) Current-sensing MOSFETs controlled by a microprocessor (no fuses and no relays) 50amp auto-resetting circuit breaker Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket Operates on 12VDC Built-in Bluetooth capabilities for remote control Protection against: overheating, over-current, shorts, reverse polarity and field collapse On-demand wireless software updates/upgrades Hardware: Powder coated steel base w/ built in hardware Silicone gasket for weatherproofing Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends Universal and vehicle specific mounting options Robust insulated base and cover Features Available Through sPOD Mobile App (free): Each switch can be programmed for: Dimming Strob 07-08 Wrangler JK, 2 & 4 Door;Amber LEDs;6 circuits rated at 30 amps at 12.5 VDC per circuit;12-position terminal block (easily attach accessories);Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller;Integrated low voltage cutoff (LVCO) battery protection with optional override;Self-healing fault protection circuits (from 1.5 to 30amps);Current-sensing MOSFETs controlled by a microprocessor (no fuses and no relays);50amp auto-resetting circuit breaker;Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket;Operates on 12VDC;Built-in Bluetooth capabilities for remote control;Protection against: overheating, over-current, shorts, reverse polarity and field collapse;On-demand wireless software updates/upgrades;1-year limited warranty; California Residents: WARNING
605.00 USD
ARB LINX Wiring Harness - SJBLINX
LINX is a unique modern controller that declutters the dashboard and centralizes the command of vehicle accessories by replacing classic switches, gauges and monitors with one sleek and smart driver interface. Built on an expandable platform, LINX will continue to evolve your on and off-road driving experience both now and into the future. Fitting out a modern 44 with a range of accessories such as driving lights, Air Lockers, dual batteries and air compressors can quickly lead to a dash full of out of place, hard to reach switches and a myriad of gauges and monitors either stuck to the windshield or drilled into the dashboard not to mention all the associated fuses and wiring. LINX offers a single point of control control via its user-friendly, Bluetooth enabled, mobile touch screen display. The LINX mobile display mounts conveniently and unobtrusively within reach of the driver while the main control hub lies neatly out of sight under the dash or seat - taking care of all accessory wiring. Patch wirng harness; Enables control with LINX accessory interface; California Residents: WARNING
12.73 USD
SPOD BantamX Touchscreen - BX-TSB-JK
The BantamX will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone. Features: Fully programmable, digital controlled system 8 circuits rated at 30 amps at 12.5 VDC per circuit 16-position terminal block (easily attach accessories) 2 controller ports (RJ45) for Ethernet cables Integrated low voltage cutoff (LVCO) battery protection w/ optional override One ATM mini-style fuse for LVCO protection and reset Failsafe self-healing fault protection system (from 1.5 to 30amps) Current-sensing MOSFETs controlled by a microprocessor (no fuses and relays) 50amp auto-resetting circuit breaker Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket Operates on 12VDC or 24VDC 8-position input terminal block for controlling outputs Built-in Bluetooth capabilities for remote control Protection against: overheating, over-current, shorts, reverse polarity and field collapse Ignition control and safety lock-out for switches 1 and 2 (optional) Up to 4 BantamX units can be daisy chained and controlled by one Touchscreen On-demand wireless software updates/upgrades Hardware: Powder coated steel base w/ built in hardware Silicone gasket for weatherproofing Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placement Universal and vehicle speci 07-18 Wrangler JK, 2 & 4 Door;Fully programmable, digital controlled system;8 circuits rated at 30 amps at 12.5 VDC per circuit;16-position terminal block (easily attach accessories);2 controller ports (RJ45) for Ethernet cables;Integrated low voltage cutoff (LVCO) battery protection with optional override;One ATM mini-style fuse for LVCO protection and reset;Failsafe self-healing fault protection system (from 1.5 to 30amps);Current-sensing MOSFETs controlled by a microprocessor (no fuses and relays);50amp auto-resetting circuit breaker;Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket;Operates on 12VDC or 24VDC;8-position input terminal block for controlling outputs;Built-in Bluetooth capabilities for remote control;Protection against: overheating, over-current, shorts, reverse polarity and field collapse;Ignition control and safety lock-out for switches 1 and 2 (optional);Up to 4 BantamX units can be daisy chained and controlled by one Touchscreen;On-demand wireless software updates/upgrades;1-year limited warranty; California Residents: WARNING
930.00 USD
Advanced Accessory Concepts Trigger 8' Extension Connectors - 2007
Extend the reach of your Trigger Accessory Control System with our 8' 12 gauge male/female extension harness! Featuring sealed wires, waterproof connectors, and shielded insulation. 8 foot extension;12-gauge male/female connectors;Features sealed wires, waterproof connectors and shielded insulation;Great for any long distance wiring;Use to wire additional accessories to the rear of the vehicle; California Residents: WARNING
14.37 USD
Rugged Ridge AC Vent Switch Pod - 17235.50
Rugged Ridge AC Vent Rocker Switch Pod. Snap in Switch Pod replaces your factory AC vent with mounting holes. Placement of these switches are extremely convenient and it looks great! 2-switch capacity pod; California Residents: WARNING
17.49 USD
ARB 4x4 Accessories LINX Terminal Kit - 7450105
ARB maintains its position as an innovator in the industry by utilizing the most modern, state of the art fabrication equipment and machinery. ARB has a very highly skilled and motivated workforce at our manufacturing plants. We have a stringent quality control system in place, ensuring our exceptionally high standards are maintained. These factors, combined with our level of automation, enable us to produce some of the finest 4WD accessories in the world. Terminal kit;Replacents/extras for ARB LINX Vehicle Accessory Interface; California Residents: WARNING
4.99 USD
SPOD BantamX Touchscreen - BX-TSB-JL
The BantamX will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone. Note: JL/JT with a diesel engine requires a special bracket. Features: Fully programmable, digital controlled system 8 circuits rated at 30 amps at 12.5 VDC per circuit 16-position terminal block (easily attach accessories) 2 controller ports (RJ45) for Ethernet cables Integrated low voltage cutoff (LVCO) battery protection w/ optional override One ATM mini-style fuse for LVCO protection and reset Failsafe self-healing fault protection system (from 1.5 to 30amps) Current-sensing MOSFETs controlled by a microprocessor (no fuses and relays) 50amp auto-resetting circuit breaker Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket Operates on 12VDC or 24VDC 8-position input terminal block for controlling outputs Built-in Bluetooth capabilities for remote control Protection against: overheating, over-current, shorts, reverse polarity and field collapse Ignition control and safety lock-out for switches 1 and 2 (optional) Up to 4 BantamX units can be daisy chained and controlled by one Touchscreen On-demand wireless software updates/upgrades Hardware: Powder coated steel base w/ built in hardware Silicone gasket for weatherproofing Simple thumb screw fastening aluminum lid with convenient sil Fully programmable, digital controlled system;8 circuits rated at 30 amps at 12.5 VDC per circuit;16-position terminal block (easily attach accessories);2 controller ports (RJ45) for Ethernet cables;Integrated low voltage cutoff (LVCO) battery protection with optional override;One ATM mini-style fuse for LVCO protection and reset;Failsafe self-healing fault protection system (from 1.5 to 30amps);Current-sensing MOSFETs controlled by a microprocessor (no fuses and relays);50amp auto-resetting circuit breaker;Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket;Operates on 12VDC or 24VDC;8-position input terminal block for controlling outputs;Built-in Bluetooth capabilities for remote control;Protection against: overheating, over-current, shorts, reverse polarity and field collapse;Ignition control and safety lock-out for switches 1 and 2 (optional);Up to 4 BantamX units can be daisy chained and controlled by one Touchscreen;On-demand wireless software updates/upgrades;1-year limited warranty; California Residents: WARNING
930.00 USD
SPOD SourceLT LED 6-Switch Panel (Red) - SL-03-TJ-R
The SourceLT will save hours of wiring and installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone. Features: SourceLT w/ Red LED Switches for 2003-2006 TJ/LJ 6 circuits rated at 30 amps at 12.5 VDC per circuit 12-position terminal block (easily attach accessories) Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller Integrated low voltage cutoff (LVCO) battery protection w/ optional override Self-healing fault protection circuits (from 1.5 to 30amps) Current-sensing MOSFETs controlled by a microprocessor (no fuses and no relays) 50amp auto-resetting circuit breaker Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket Operates on 12VDC Built-in Bluetooth capabilities for remote control Protection against: overheating, over-current, shorts, reverse polarity and field collapse On-demand wireless software updates/upgrades Hardware: Powder coated steel base w/ built in hardware Silicone gasket for weatherproofing Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends Universal and vehicle specific mounting options Robust insulated base and cover Features Available Through sPOD Mobile App (free): Each switch can be programmed for: Dimming Strobe Flash Momentary Switc 03-06 Wrangler TJ/LJ;Red LEDs;6 circuits rated at 30 amps at 12.5 VDC per circuit;12-position terminal block (easily attach accessories);Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller;Integrated low voltage cutoff (LVCO) battery protection with optional override;Self-healing fault protection circuits (from 1.5 to 30amps);Current-sensing MOSFETs controlled by a microprocessor (no fuses and no relays);50amp auto-resetting circuit breaker;Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket;Operates on 12VDC;Built-in Bluetooth capabilities for remote control;Protection against: overheating, over-current, shorts, reverse polarity and field collapse;On-demand wireless software updates/upgrades;1-year limited warranty; California Residents: WARNING
640.00 USD
Vivid Lumen 3 Port Rocker Switch - 13403
This rocker switch features 3 ports and a reliably built design. It fits universally, and is easy to install with the provided four screws. (1) 3 Port switch;1 year warranty;Universal fit;Hardware included; California Residents: WARNING
40.95 USD
SPOD SourceLT LED 6-Switch Panel with AeroForce Gauge Opening (Amber) - SL-AF0708-JK-A
The SourceLT will save hours of wiring and installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone. Features: SourceLT w/ Opening (2 1/16 Inch) for AeroForce Gauge and Amber LED Switch Panel for JK 2007-2008 LED Color: Amber 6 circuits rated at 30 amps at 12.5 VDC per circuit 12-position terminal block (easily attach accessories) Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller Integrated low voltage cutoff (LVCO) battery protection w/ optional override Self-healing fault protection circuits (from 1.5 to 30amps) Current-sensing MOSFETs controlled by a microprocessor (no fuses and no relays) 50amp auto-resetting circuit breaker Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket Operates on 12VDC Built-in Bluetooth capabilities for remote control Protection against: overheating, over-current, shorts, reverse polarity and field collapse On-demand wireless software updates/upgrades Hardware: Powder coated steel base w/ built in hardware Silicone gasket for weatherproofing Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends Universal and vehicle specific mounting options Robust insulated base and cover Features Available Through sPOD Mobile App (free): Each switch can be programmed for: D 07-08 Wrangler JK, 2 & 4 Door;Amber LEDs;2-1/16 opening for AeroForce Gauge;6 circuits rated at 30 amps at 12.5 VDC per circuit;12-position terminal block (easily attach accessories);Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller;Integrated low voltage cutoff (LVCO) battery protection with optional override;Self-healing fault protection circuits (from 1.5 to 30amps);Current-sensing MOSFETs controlled by a microprocessor (no fuses and no relays);50amp auto-resetting circuit breaker;Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket;Operates on 12VDC;Built-in Bluetooth capabilities for remote control;Protection against: overheating, over-current, shorts, reverse polarity and field collapse;On-demand wireless software updates/upgrades;1-year limited warranty; California Residents: WARNING
590.00 USD
Advanced Accessory Concepts Trigger 6 Connector Harness - 2004
Extend the reach of your Trigger Accessory Control System with our 6 12 gauge Y harness! Featuring sealed wires, waterproof connectors, and shielded insulation. Use when powering two individual accessories with one circuit. 6 inches;'Y' connector harness;12-gauge;Features sealed wires, waterproof connectors and shielded insulation;Use when powering two individual accessories with one circuit; California Residents: WARNING
10.17 USD
SPOD SourceLT with Ram Mount Ball LED 6-Switch Panel and 36 Battery Cables (Blue) - SL-RAM-36-B
Universal System for many vehicle types. This system includes a 6-switch panel with a 1 inch RAM Mount Ball. The SourceLT will save hours of wiring and installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone. Features: SourceLT on RAM Mount for Uni w/ Blue LED Switch Panel with 36 Inch battery cables LED Color: Blue 6 circuits rated at 30 amps at 12.5 VDC per circuit 12-position terminal block (easily attach accessories) Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller Integrated low voltage cutoff (LVCO) battery protection w/ optional override Self-healing fault protection circuits (from 1.5 to 30amps) Current-sensing MOSFETs controlled by a microprocessor (no fuses and no relays) 50amp auto-resetting circuit breaker Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket Operates on 12VDC Built-in Bluetooth capabilities for remote control Protection against: overheating, over-current, shorts, reverse polarity and field collapse On-demand wireless software updates/upgrades Hardware: Powder coated steel base w/ built in hardware Silicone gasket for weatherproofing Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends Universal and vehicle specific mounting options Robust insulated base and cover Features Available Through sPOD Universal application;Blue LEDs;6 circuits rated at 30 amps at 12.5 VDC per circuit;12-position terminal block (easily attach accessories);Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller;Integrated low voltage cutoff (LVCO) battery protection with optional override;Self-healing fault protection circuits (from 1.5 to 30amps);Current-sensing MOSFETs controlled by a microprocessor (no fuses and no relays);50amp auto-resetting circuit breaker;Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket;Operates on 12VDC;Built-in Bluetooth capabilities for remote control;Protection against: overheating, over-current, shorts, reverse polarity and field collapse;On-demand wireless software updates/upgrades;1-year limited warranty; California Residents: WARNING
665.00 USD