Advance Adapters GM SM420 Transmission To Dana 18/20 Transfer Case Adapter - 50-2400
Fits Jeep dana 18/20 transfer case;6 spine drive gear;GM SM420;4 speed;Maunal;New SM420 main shaft design; California Residents: WARNING This adapter kit includes a new SM420 output shaft!! Our GM SM420 adapter to the Dana 18 / 20 is 4.50 in length. The adapter material is 356 T-6 heat treated aluminum alloy, and the adapter has a provision for a transmission mount. Our kit will include a adapter housing, new transmission main shaft, mount block, gaskets, seal, nylon lock nut, and adapter instructions. This adapter assembly will fit any Dana Spicer 18 / 20, Scout version with a 6 tooth female drive gear. The transfer case index to the new adapter will require an index retainer & sealed bearing. Please I.D. the transfer case bore size (3-1/8) small hole or (4) large hole for proper retainer. Additional information can be obtained in our on-line catalog, Jeep & Scout Vehicle Section: Transfer Case Information, Jeeps 1941-79. The kit is designed for exclusive use with the GM SM420 4 speed transmission. The SM420 was used in GM trucks 1947 to 1968 and has a 10 spline output shaft and was used in both 2wd and divorced 4wd applications. Required Options ADV716001 Large Hole Retainer or ADV716002 Small Hole Retainer, ADV716302 Sealed Bearing
540.99 USD
Advance Adapters Atlas Control Module - 300377
07-18 Wrangler JK, 2 & 4 Door;Works with Atlas 2-speed transfer case;Can be used on a 4-speed case but there is no provision to connect an additional low range switch in the planetary housing;For cases built prior to August 2014; California Residents: WARNING The JK control module is the only way of keeping all the stock functions operational when upgrading to an Atlas transfer case. This Module lights the dash lights in both high and low range as well as the settings on the ESP when in 4WD and lockers and swaybar disconnect on the Rubicon models. This kit is designed for the Atlas 2 speed but can be used on a 4 speed, However, the is no provision to connect an additional low range switch in the planetary housing.
441.99 USD
Advance Adapters GM 4L60E Transmission To NP231 23 Spline Transfer Case Adapter - 50-0402
Transfer Case: Jeep NP231 (23 spline) [AX-15]Jeep NP231 (23 spline) [NV3550 and TF999];Transmission:GM 4L60, GM 4L60E Early Model (1992-1997) and GM 700R4; California Residents: WARNING The GM 4L60E adapter to the Jeep 23 spline NP231 is 3.600 inch in length. And the overall length of the transmission and adapter is 26.975 inch. Adapter material is 356 T-6 heat treated aluminum alloy. The adapter has a provision for a transmission mount. The adapter kit includes an adapter housing, 4L60E 23 spline output shaft, GM VSS sensor, reluctor ring, O-ring, gasket, fastening hardware, and adapter instructions. This adapter assembly will fit any Jeep New Process transfer case with a 23 spline input shaft. New Process transfer cases with a long 23 spline input (2.120 inch), will need to be shortened so that it protrudes (1.5 inch) from the front of the transfer case. The adapter kit is designed for exclusive use with any GM 4L60E with a non-removable bellhousing. The GM 4L60E adapter to the Jeep 23 spline NP231 is 3.600 inch in length. And the overall length of the transmission and adapter is 26.975 inch. Adapter material is 356 T-6 heat treated aluminum alloy. The adapter has a provision for a transmission mount. The adapter kit includes an adapter housing, 4L60E 23 spline output shaft, GM VSS sensor, reluctor ring, O-ring, gasket, fastening hardware, and adapter instructions.
523.99 USD