Rubicon Express Front Long Arm Crossmember Kit - RE9920
84-01 Cherokee XJ;Black powder coat;For use with long arm suspension;RE9922 kit is required to complete;Welding required; California Residents: WARNING This is the front control arm mount used in our RE6300 Long Arm kit. Designed to take a beating, but still allows the XJLA unibody to flex as designed. Welding required.
309.99 USD
Rugged Ridge Heavy Duty Transfer Case Crossmember - 12035.60
Heavy Duty Transfer Case Crossmember;Black powdercoated;Bolt on; California Residents: WARNING The Rugged Ridge Heavy Duty Transfer Case Crossmember is made of 3/16-inch steel, welded, reinforced and powdercoated black to protect the underbelly of your XJ from the elements.
195.99 USD
Rubicon Express Crossmember Front Long Arm JK - RE4521
07-18 Wrangler JK, 2 & 4 Door;With long arm suspension;For use with long arm suspension;Welding required; California Residents: WARNING The Rubicon Express Extreme-Duty Long Arm System was the first radius long arm suspension available for the Jeep Wrangler JK. This system has been engineered to work WITH your Jeeps Electronic Stability Controls and Rubicon edition electronic sway bar WITHOUT compromising safety. Featuring our world-class Chromoly Radius Long Arms, the geometry has been meticulously designed to keep pinion and driveshaft angles in phase, while elimination suspension jacking and unwanted suspension squat. Our Extreme-Duty Long Arm system coupled with properly valved Rubicon Express shocks allows the JK Wrangler to transmit throttle input to the wheels over varied terrain, providing sure-footed traction and positive suspension feedback. The result is superior on road handling and unrivaled off road performance, without the need to disable factory safety features.
459.99 USD
Rubicon Express Extreme-Duty Crossmember - RE4202
03-06 Wrangler TJ with long arm suspension;Requires the R/ERE4200 for installation; California Residents: WARNING Upgrade your Jeeps Suspension with this Jeep XD Suspension X-Member by Rubicon Express.
186.99 USD
Rubicon Express Extreme Duty Crossmember Hardware Kit - HWC10075
97-02 Wrangler TJ;For use with PN[RE4100] and [RE4102]; California Residents: WARNING This is the Extreme Duty Crossmember Hardware Kit Fits 1997 to 2002 Jeep TJ Wrangler
54.99 USD
Rubicon Express Main Assembly Rear Long Arm ZJ - RE9960
Black powder coat;For use with long arm suspension; California Residents: WARNING The key component to the rear of the ZJ Long Arm system. Provides mounting point for the rear control arms. Designed to conquer the trail, but not hinder the flex of the ZJ unibody.
1099.99 USD
Rubicon Express Crossmember Extreme-Duty TJ 97-02/ 2 Of 2 - RE4102
97-02 Wrangler TJ;This is part of a 2 box kit - you must also order RE4100 to complete; California Residents: WARNING Upgrade your Jeeps Suspension with this X-Member from Rubicon Express.
201.99 USD
Rubicon Express Extreme-Duty Crossmember - RE4200
03-06 Wrangler TJ/LJ;Black powder coat;Crossmember for long arm suspension;Does NOT require welding;Does require the R/ERE4202 for installation; California Residents: WARNING Long arm conversion pan for TJ Wrangler 03-06. The long arm conversion pan is the heart of the RE7200 series lift kits. This is the new mounting point for all of the control arms, as well as the transmission and transfer case. The brackets are designed to strengthen the frame, while the convenient drop out center section allows for easy transfer case and transmission service without having to remove suspension components. The pan increases ground clearance by nearly an inch. Mounting this pan requires modification of the exhaust hanger bracket on some vehicles.
507.99 USD
Rubicon Express Crossmember Extreme-Duty TJ 97-02/ 1 Of 2 - RE4100
97-02 Wrangler TJ;Black powder coat;For use with Rubicon Express long arm control arms;This is part of a 2 box kit - you must also order RE4102 to complete; California Residents: WARNING Long arm conversion pan for TJ Wrangler 97-02. The long arm conversion pan is the heart of the RE7200 series lift kits. This is the new mounting point for all of the control arms, as well as the transmission and transfer case. The brackets are designed to strengthen the frame, while the convenient drop out center section allows for easy transfer case and transmission service without having to remove suspension components. The pan increases ground clearance by nearly an inch. Mounting this pan requires modification of the exhaust hanger bracket on some vehicles.
515.99 USD