J.E. Reel 1310 CV Heavy-Duty Front Drive Shaft - 3112JK-24F
07-18 Wrangler JK, 2 & 4 Door;Automatic Transmission; California Residents: WARNING The J.E. 1310 series heavy-duty front drive shaft upgrades your driveline to accommodate the stress of larger tires. Designed to be used on JKs running tires up to 35 for mild use.
612.99 USD
Front Drive Shaft
1980 to 1986 CJ;29-1/2 collapsed and 31-1/4 running length; California Residents: WARNING Collapsed length 29-1/2. Running length 31-1/4. Fits 4, 6 or 8 cylinder engines and T-4, T-5 and T-170 transmissions.
545.99 USD
Rubicon Express Drive Shaft Package - JK1804
12-18 Wrangler JK, 2-Door;Automatic transmission;Includes front and rear drive shafts and yoke flanges;1310 U-joints;Dynamically balanced to eliminate vibration;Available from 15.5 to 38.5 inches long;Recommended in vehicles with 3.5 inches or more of lift;Billet aluminum flange; California Residents: WARNING Prevent driveline vibration after you lift your Jeep JK with our Dana Spicer 1310 CV style JK driveshafts. Designed to replace the factory shafts and to be ran with our replacement yoke and flange for the transfer case. Built for daily driving and the demands of off-roading. Driveshaft lengths are for factory gasoline motors.
1078.96 USD
Rubicon Express Drive Shaft Package - JK1803
12-18 Wrangler JK, 2-Door;Manual transmission;07-11 Wrangler JK, 2-Door;Manual or automatic transmission;Includes front and rear drive shafts and yoke flanges;1310 U-joints;Dynamically balanced to eliminate vibration;Available from 15.5 to 38.5 inches long;Recommended in vehicles with 3.5 inches or more of lift;Billet aluminum flange; California Residents: WARNING Prevent driveline vibration after you lift your Jeep JK with our Dana Spicer 1310 CV style JK driveshafts. Designed to replace the factory shafts and to be ran with our replacement yoke and flange for the transfer case. Built for daily driving and the demands of off-roading. Driveshaft lengths are for factory gasoline motors.
1098.96 USD
J.E. Reel 1350 CV Heavy-Duty Front Drive Shaft - 3512JK-24F
2 and 4-door models;Fits stock to 6 lift; California Residents: WARNING The J.E. 1350 series heavy duty front drive shaft upgrades your driveline to accommodate the stress of larger tires. Designed to be used on JKs running tires up to 37 inch for mild use. For lifts up 6.
740.99 USD
Rubicon Express Drive Shaft Package - JK1802
12-18 Wrangler JK, 4-Door with manual trans only;07-11 Wrangler JK, 4-Door with manual or auto trans;Includes front and rear driveshafts;Includes front and rear driveshaft yoke flanges;Recommended in vehicles with 3.5 inches or more of lift; California Residents: WARNING Prevent driveline vibration after you lift your Jeep JK with our Dana Spicer 1310 CV style JK driveshafts. Designed to replace the factory shafts and to be ran with our replacement yoke and flange for the transfer case. Built for daily driving and the demands of off-roading. Driveshaft lengths are for factory gasoline motors. Spicer drive shafts and components are as good as they get. This drive shaft kit has everything you need to upgrade your front and rear driveshafts in your Jeep Wrangler JK. The kit is compatible with Atlas transfer cases and any other 1310 series CV yoke. Measurements are taken center to center on the u-joint with the slip stub at the center of its travel. Measure your vehicle on the ground in the running position to get correct length.
1106.96 USD
Crown Automotive Front Drive Shaft - 52853431AA
07-10 Grand Cherokee WK;07-10 Commander;With Quadradrive; California Residents: WARNING For over 50 years, Crown Automotive has been the leading manufacturer and distributor of replacement parts for Jeep vehicles. With over 8,000 different part numbers, including many factory-discontinued items, we offer you exceptional quality that is only matched by an exceptional warranty.
593.99 USD
Crown Automotive Front Drive Shaft - 52087805
94-95 Grand Cherokee ZJ with 5.2L and A500;Without CV;93-96 Grand Cherokee wih 4.0L or 5.2L;NP231 or 242 transfer case;Collapsed length:30.625 inches; California Residents: WARNING For over 50 years, Crown Automotive has been the leading manufacturer and distributor of replacement parts for Jeep vehicles. With over 8,000 different part numbers, including many factory-discontinued items, we offer you exceptional quality that is only matched by an exceptional warranty.
1010.99 USD
Fabtech Heavy-Duty Rear Drive Shaft - FTS94065
4-door models;Rear driveshaft;Perfect upgrade with 4 lift; California Residents: WARNING Fabtech's CV or heavy-duty style driveshafts are necessary for use with some lift kits. Fabtech, a world class manufacturer of Suspension Systems and Accessories that dominates the suspension system market!
717.83 USD
J.E. Reel 1310 CV Heavy-Duty Rear Drive Shaft - JER3112JK-2R
2 door model;Automatic Transmission; California Residents: WARNING The J.E. 1310 series heavy-duty front drive shaft upgrades your driveline to accommodate the stress of larger tires. Designed to be used on JKs running tires up to 35 inch for mild use.
597.99 USD
G2 Axle and Gear 1350 JL Sport M/T Front Drive Shaft - 92-2150-1M
Wrangler JL , 2 & 4 Door;Non-Rubicon models;Transmission: manual; Position: front; Lift height max: 6 inches; U-joint: 1350; Double cardan CV; Recommended use: recommended for stock to 6 in lift and up to 37 inch tires; California Residents: WARNING G2 Axle and Gear offers heavy duty 1 ton upgrade front and rear driveshafts for the Jeep JL models. These high quality driveshafts are made from heavy duty D.O.M. tubing for strength, include solid body 1350 series u-joints for durability, and are dynamically balanced to eliminate vibration.
799.99 USD
Omix-ADA CV Drive Shaft Repair Kit - 16950.01
07-18 Wrangler JK, 2 & 4 Door;Front or rear drive shaft; California Residents: WARNING Sometimes we get lucky and instead of having to replace an entire driveshaft we can repair the broken one. This CV driveshaft repair kit from Omix-ADA includes CV joint assembly, end caps, gasket, clamps, bolts, snap ring, and grease.
178.99 USD
G2 Double Cardan CV Style Front Drive Shaft - 92-2050-3
07-11 Wrangler JK, 2 & 4 Door;Automatic transmission;Position: Front;Lift Height Max: 6 inches;U-Joint: 1350;Driveshaft type: Double Cardan CV;Recommended use: Stock to 6 inch lift;Up to 37 inch tires; California Residents: WARNING G2 Axle and Gear offers Heavy Duty replacement front and rear driveshafts for the JK models. These high quality driveshafts are made from heavy duty D.O.M. Tubing for strength, include solid body U-Joints for durability, and are dynamically balanced to eliminate vibration.
799.99 USD
G2 Double Cardan CV Style Rear Drive Shaft - 92-2052-8
12-18 Wrangler JK, 4-Door;Automatic transmission;Position: Rear;Lift Height Max: 6 inches;U-Joint: 1350;drive shaft type: Double Cardan CV;Recommended use: Stock to 6 inch lift;Up to 37 inch tires; California Residents: WARNING G2 Axle and Gear offers Heavy Duty replacement front and rear drive shafts for the JK models. These high quality drive shafts are made from heavy duty D.O.M. Tubing for strength, include solid body U-Joints for durability, and are dynamically balanced to eliminate vibration.
824.99 USD
Rubicon Express CVF Drive Shaft - RE1898-175
17.5 inch long; California Residents: WARNING Spicer drive shafts and components are as good as they get. This drive shaft is compatible with the RE1801 / 1807 Slip yoke eliminator kit, Measurements are taken center to center on the u-joint with the slip stub at the center of its travel. measure your vehicle on the ground in the running position to get correct length.
369.99 USD
G2 Axle and Gear 1350 JL Sport A/T 2 Dr Rear Drive Shaft - 92-2149-2
Wrangler JL , 2-Door;Non-Rubicon models;Transmission: automatic; Position: rear; Lift height max: 6 inches; U-joint: 1350; Double cardan CV; Recommended use: recommended for stock to 6 in lift and up to 37 inch tires; California Residents: WARNING G2 Axle and Gear offers heavy duty 1 ton upgrade front and rear driveshafts for the Jeep JL models. These high quality driveshafts are made from heavy duty D.O.M. tubing for strength, include solid body 1350 series u-joints for durability, and are dynamically balanced to eliminate vibration.
799.99 USD
G2 Axle and Gear 1350 JL Rubicon A/T Front Drive Shaft - 92-2151-1
Wrangler JL Rubicon, 2 & 4 Door;Transmission: automatic;Position: front; Lift height max: 6 inches; U-joint: 1350; Double cardan CV; Recommended use: recommended for stock to 6 in lift and up to 37 inch tires; California Residents: WARNING G2 Axle and Gear offers heavy duty 1 ton upgrade front and rear driveshafts for the Jeep JL models. These high quality driveshafts are made from heavy duty D.O.M. tubing for strength, include solid body 1350 series u-joints for durability, and are dynamically balanced to eliminate vibration.
799.99 USD
Pro Comp CV-Style Drive Shaft - 4040
87-93 Wrangler YJ;4-5 of lift;For use with slip yoke eliminator;CV style drive shaft;17 collapsed and 21.5 extended; California Residents: WARNING Pro Comps rear CV replacement driveshaft's are designed to be used with Pro Comp slip yoke eliminator kits. They're 2-piece style driveshaft's made of high-quality steel.
407.99 USD
J.E. Reel 1310 Heavy Duty Rear Drive Shaft (Manual Transmission) - 3118JL-2RM
Wrangler JL, 2-Door;Rear driveshaft;Manual transmission;Recommended for stock to 4 1/2 lift;Up to 35 tires for mild use;Pinion yoke;Transfer case yoke;Retaining hardware; California Residents: WARNING This System is stronger than O.E. type applications recommended for stock to 4? lift & up to 35? tires for mild use. *2 door with 4? lift are recommended to use 1350 rear driveline. J.E. Reel Drivelines are designed to work with 2?? & 4?? lifts from most lift manufacturers. Lifts higher than 4? or long arm lifts must be measured for driveline length. It is best to measure all drivelines if possible. Note: JL 2018 Powertrain is installed at 9.25?. This means the Transfer Case rear output slopes down to rear axle and front output slopes up away from front axle. This is especially important to consider on the 2018 model JL. Maximum Angle 1310 C.V. Less than 26? and 1350 C.V. Less than 32?.
597.99 USD
J.E. Reel 1350 Front Drive Shaft for M186/Dana 30 (8 Speed Automatic Transmission) -3518JL-24FFT
4-door models;Front driveshaft;8 speed automatic transmission;Front axle;M186/Dana 30;Select Trac full time; California Residents: WARNING Note: JL 2018 Powertrain is installed at 9.25 degrees. This means the Transfer Case rear output slopes down to rear axle and front output slopes up away from front axle. This is especially important to consider on the 2018 model JL. Maximum Angle 1310 C.V. Less than 26 degrees and 1350 C.V. Less than 32 degrees.
777.99 USD
Yukon Gear & Axle OE Style Front Drive Shaft - YDS004
07-11 Wrangler JK, 2 & 4 Door;1310 u-joint;OE design;Includes transfer case yoke and retaining hardware;Recommended for stock to 2.5 lifts with up to 33 tires;Larger tires and lifts should upgrade to HD driveshafts; California Residents: WARNING Yukon Gear & Axle Performance Drive Shafts deliver unrivaled performance over stock, fitting vehicles with up to a 4-1/2 lift. Yukon drive shafts feature high strength steel, 1310-1410 u-joints, and apply sufficient slip travel. These complete drive shaft assemblies offer greater strength, increased operating angles, and longer life for whatever surface, trail, road, or terrain you seek. Yukon drive shafts are preferred by top off-road, diesel, and street racers because they can take the abuse of big tires and high horsepower. When your vehicle demands performance, durability, and strength choose Yukon Performance Drive Shafts. All Yukon Performance Drive Shafts come with a lifetime warranty (excluding u-joints). Yukon offers its Y.E.S. Plan which provides a lifetime, comprehensive, no-questions-asked protection plan covering your drive shaft for as long as you own your vehicle.
779.89 USD
G2 Axle and Gear 1350 JL Rubicon M/T 2 Dr Rear Drive Shaft - 92-2152-2M
Wrangler JL Rubicon, 2-Door;Transmission: manual; Position: rear; Lift height max: 6 inches; U-joint: 1350; Double cardan CV; Recommended use: recommended for stock to 6 in lift and up to 37 inch tires; California Residents: WARNING G2 Axle and Gear offers heavy duty 1 ton upgrade front and rear driveshafts for the Jeep JL models. These high quality driveshafts are made from heavy duty D.O.M. tubing for strength, include solid body 1350 series u-joints for durability, and are dynamically balanced to eliminate vibration.
799.99 USD
Rugged Ridge CV Rear Drive Shaft - 16592.05
2-6 inch of lift;18 inch extended and 14 inch collapsed; California Residents: WARNING This rear driveshaft fits 97-06 Jeep Wrangler with 2 to 6 inches of suspension lift with Rugged Ridge SYE kit. Reduces vibration and levels out driveline angle. It does not fit Rubicon models.
701.99 USD
Rubicon Express Drive Shaft Package - JK1801
12-18 Wrangler JK, 4-Door;Automatic transmission;Includes front and rear drive shafts and yoke flanges;1310 U-joints;Dynamically balanced to eliminate vibration;Available from 15.5 to 38.5 inches long;Recommended in vehicles with 3.5 inches or more of lift;Billet aluminum flange; California Residents: WARNING Prevent driveline vibration after you lift your Jeep JK with our Dana Spicer 1310 CV style JK driveshafts. Designed to replace the factory shafts and to be ran with our replacement yoke and flange for the transfer case. Built for daily driving and the demands of off-roading. Driveshaft lengths are for factory gasoline motors.
1086.96 USD
Crown Automotive Front Drive Shaft - 53002001
87-95 Wrangler YJ;With 4.0L or 4.2L engine;With manual transmission; California Residents: WARNING For over 50 years, Crown Automotive has been the leading manufacturer and distributor of replacement parts for Jeep vehicles. With over 8,000 different part numbers, including many factory-discontinued items, we offer you exceptional quality that is only matched by an exceptional warranty.
585.99 USD