Mountain Off Road Enterprises Tube End Inserts - TE12R
Want to build your own tie rods, track bars, radius arms or link bars, and need the tube ends inserts to perform the task? M.O.R.E has the most popular sizes. Tube ends weld to steel tubing to give you threaded ends for your custom project, without a lathe. Universal application;Bare steel;3/4 inch-16 right-hand thread;To be used with 1-1/4 inchX.188 wall D.O.M. Tubing; California Residents: WARNING
18.06 USD
Trail Gear Threaded Tube Adapter - 110113-1-KIT
These weld-in bungs are designed for Heim and Johnny Joints. Sold each Bung;Threaded Tube Adapter; California Residents: WARNING
18.15 USD
Trail Gear Steering Rod Bungs - 130320-KIT
These weld-in bungs are designed for Heim and Johnny Joints. Sold each Steering Rod Bungs;Weld In;Left Hand; California Residents: WARNING
39.99 USD
RockJock Threaded Bung - CE-9114BL1
Custom machined weld-in bung for use with forged Johnny Joint rod ends or any other 1in. thread rod end. Hex shaped - not round for ease of bar adjustment. Also included with this bung is a custom machined jam nut that is the same hex size as the bung. Threaded Bung;1 1/4 in-12;LH Thread; California Residents: WARNING
32.00 USD
RockJock 1-1/4 Inch -12 Threaded Bung With Jam Nut - RH Thread - CE-9114B
Custom machined, right hand thread, weld-in bung for use with forged Johnny Joint rod ends or any other 1 1/4 thread rod end. Hex shaped - not round - for ease of bar adjustment. Also included with this bung is a custom machined jam nut that is the same hex size as the bung. Designed to fit into a tube with a 1 1/2 i.d. Sold each. Universal Fit;Features 2-1/2 inch of 1-1/4 inch-12 Rh Threads;Fits inside a 1-1/2 inch I.D. Tube Minimum;Includes Custom Jam Nut;CNC Machined Steel Construction;Must Be Welded; California Residents: WARNING
39.00 USD
Synergy Manufacturing Double Adjuster Tube Adapter - 628567
The Synergy Double Adjuster Tube Adapter is designed to eliminate the need for jam nuts that are normally used when building link suspension & steering systems. The use of the Double Adjuster allows the suspension/steering link to be adjusted without removal. The Double Adjuster allows the user to fine-tune the suspension/steering geometry by loosening the pinch bolt and turning the adjuster sleeve. The tube adapter seals the link off from water or other debris entering the link which can cause damage over time. An integrated drain hole lets any water that enters the threads of the adapter drain out. 1 1/4 inch-12 LH Thread;Tube ID: 1 1/2 inch;Ideal for link suspension designs with weld on bushings/joints at one end or bent suspension links;Made from solid stock 1018 Steel;Adapters Include: (1) Weld on Tube Adapter with Pinch Bolt Slit and Tubes, (1) Zinc Plated Double Adjuster Sleeve to be used with a Thread Shank Rod End, and (1) Pinch Bolt Hardware;Welding required;Made in the U.S.A; California Residents: WARNING
60.00 USD
Rubicon Express 1 -14 x 6 Threaded Rod - RM12070
When fabricating your off-road monster use genuine Rubicon Express builder parts. 1 inch-14 Thread;Fits easily into 1 inch ID tubing;Sold in 6 inch increments only; California Residents: WARNING
12.99 USD
Synergy Manufacturing Double Adjuster Tube Adapter - 3620-07-14-10
The Synergy Double Adjuster Tube Adapter is designed to eliminate the need for jam nuts that are normally used when building link suspension & steering systems. The use of the Double Adjuster allows the suspension/steering link to be adjusted without removal. The Double Adjuster allows the user to fine-tune the suspension/steering geometry by loosening the pinch bolt and turning the adjuster sleeve. The tube adapter seals the link off from water or other debris entering the link which can cause damage over time. An integrated drain hole lets any water that enters the threads of the adapter drain out. 7/8 inch-14 LH Thread;Tube ID: 1 inch;Ideal for link suspension designs with weld on bushings/joints at one end or bent suspension links;Made from solid stock 1018 Steel;Adapters Include: (1) Weld on Tube Adapter with Pinch Bolt Slit and Tubes, (1) Zinc Plated Double Adjuster Sleeve to be used with a Thread Shank Rod End, and (1) Pinch Bolt Hardware;Welding required;Made in the U.S.A; California Residents: WARNING
61.99 USD
Synergy Manufacturing Double Adjuster Tube Adapter - 628566
The Synergy Double Adjuster Tube Adapter is designed to eliminate the need for jam nuts that are normally used when building link suspension & steering systems. The use of the Double Adjuster allows the suspension/steering link to be adjusted without removal. The Double Adjuster allows the user to fine-tune the suspension/steering geometry by loosening the pinch bolt and turning the adjuster sleeve. The tube adapter seals the link off from water or other debris entering the link which can cause damage over time. An integrated drain hole lets any water that enters the threads of the adapter drain out. 1 1/4 inch-12 LH Thread;Tube ID: 1 3/8 inch;Ideal for link suspension designs with weld on bushings/joints at one end or bent suspension links;Made from solid stock 1018 Steel;Adapters Include: (1) Weld on Tube Adapter with Pinch Bolt Slit and Tubes, (1) Zinc Plated Double Adjuster Sleeve to be used with a Thread Shank Rod End, and (1) Pinch Bolt Hardware;Welding required;Made in the U.S.A; California Residents: WARNING
60.00 USD
RockJock 1 -14 Left Hand Threaded Bung - CE-9113BL1
Custom machined, left hand thread, weld-in bung for use with forged Johnny Joint rod ends or any other 1-14 thread rod end. Hex shaped - not round - for ease of bar adjustment. Designed to fit into a tube with a 1 1/4 i.d. Threaded bung;1-14 left hand thread;Hex shaped;Designed to fit 1.25 inch ID tube;Sold individually; California Residents: WARNING
27.00 USD
RockJock 3/4 -16 Right Hand Threaded Bung - CE-9112B1
Custom machined, right hand thread, weld-in bung for use with forged Johnny Joint rod ends or any other 3/4 thread rod end. Hex shaped - not round - for ease of bar adjustment. Designed to fit into a tube with a 1 i.d. Threaded bung;3/4-16 right hand thread;Hex shaped;Designed to fit 1 inch ID tube;Sold individually; California Residents: WARNING
30.00 USD
Rubicon Express 1 Female Rod End Coupler - RM12040
Replace damaged rod ends with these individual units from Rubicon Express. Joint not included. Female Rod End Coupler;1 inch-14 Thread;Right hand thread; California Residents: WARNING
10.99 USD
Rubicon Express Threaded Weld Spud - RM12060
Billet threaded Weld Spud with 1.25 threads, CNC machined from 4142HT alloy for superior strength. To be used with 1.50 ID tubing. This is the same threaded weld spud Rubicon MFG uses in their lower long arm control arms. Billet threaded Weld Spud with 1.25 inch-12 threads;CNC Machined from 4142HT alloy for superior strength;To be used with 1.50 inch ID tubing;Welding Required; California Residents: WARNING
40.99 USD
RockJock 1 Inch -14 Threaded Bung With Jam Nut - LH Thread - CE-9113BL
Custom machined, left hand thread, weld-in bung for use with forged Johnny Joint rod ends or any other 1 thread rod end. Hex shaped - not round - for ease of bar adjustment. Also included with this bung is a custom machined jam nut that is the same hex size as the bung. Designed to fit into a tube with a 1 1/4 i.d. Sold each. Universal Fit;Features 2 inch of 1 inch-14 Lh Threads;Fits inside a 1-1/4 inch I.D. Tube Minimum;Includes Custom Jam Nut;CNC Machined Steel Construction;Must Be Welded; California Residents: WARNING
32.00 USD
Synergy Manufacturing Double Adjuster Tube Adapter - 628503
The Synergy Double Adjuster Tube Adapter is designed to eliminate the need for jam nuts that are normally used when building link suspension & steering systems. The use of the Double Adjuster allows the suspension/steering link to be adjusted without removal. The Double Adjuster allows the user to fine-tune the suspension/steering geometry by loosening the pinch bolt and turning the adjuster sleeve. The tube adapter seals the link off from water or other debris entering the link which can cause damage over time. An integrated drain hole lets any water that enters the threads of the adapter drain out. 1 inch-14 LH Thread;Tube ID: 1 1/8 inch;Ideal for link suspension designs with weld on bushings/joints at one end or bent suspension links;Made from solid stock 1018 Steel;Adapters Include: (1) Weld on Tube Adapter with Pinch Bolt Slit and Tubes, (1) Zinc Plated Double Adjuster Sleeve to be used with a Thread Shank Rod End, and (1) Pinch Bolt Hardware;Welding required;Made in the U.S.A; California Residents: WARNING
60.00 USD
Rubicon Express Tube Adapter - RM12010
Designed to Weld into 1 inside diameter tube. Universal builder part;3/4 inch right hand thread;Welding required; California Residents: WARNING
10.99 USD
RockJock 1 1/4-12 Threaded Bung - CE-9114B1
Custom machined, right hand thread, weld-in bung for use with forged Johnny Joint rod ends or any other 1 1/4 thread rod end. Hex shaped - not round - for ease of bar adjustment. Designed to fit into a tube with a 1 1/2 i.d. Tube Size: 1.5 ID tube;Thread Size: 1 1/4 inch, 12 TPI;Thread Direction: Right hand; California Residents: WARNING
32.00 USD
Trail Gear Tube Ends - 180189-KIT
These weld-in bungs are designed for Heim and Johnny Joints. Sold each 1020 Steel;Weld On;10 Per Pack; California Residents: WARNING
10.08 USD
Trail Gear Tube Ends - 180188-KIT
These weld-in bungs are designed for Heim and Johnny Joints. Sold each 1020 Steel;Weld On;10 Per Pack; California Residents: WARNING
10.08 USD
RockJock 1-1/4 Inch -12 Threaded Bung RH Thread - CE-9114BR
Custom machined, left hand thread, weld-in bung for use with forged Johnny Joint rod ends or any other 1 1/4 thread rod end. Designed to fit into a tube with a 1 1/2 i.d. Sold each. Threaded Bung;Round;w/o Jam Nut;Each; California Residents: WARNING
22.00 USD
Mountain Off Road Enterprises Tube End Inserts - TE14L
Want to build your own tie rods, track bars, radius arms or link bars, and need the tube ends inserts to perform the task? M.O.R.E has the most popular sizes. Tube ends weld to steel tubing to give you threaded ends for your custom project, without a lathe. Universal application;Bare steel;3/4 inch-16 left-hand thread;To be used with 1-1/2 inch x.250 wall D.O.M. Tubing; California Residents: WARNING
20.95 USD
RockJock 7/8 -14 Left Hand Threaded Bung - CE-9116BL1
Custom machined, left hand thread, weld-in bung for use with forged Johnny Joint rod ends or any other 7/8-14 thread rod end. Hex shaped - not round - for ease of bar adjustment. Designed to fit into a tube with a 1 1/4 i.d. Threaded bung;7/8-14 left hand thread;Hex shaped;Designed to fit 1.25 inch ID tube;Sold individually; California Residents: WARNING
22.00 USD
Trail Gear Trail Spike Tube End - 300181-KIT
Up the "Badass factor of your rock rig with Trail-Gear's new Trail Spikes. Trail Spikes can be welded on to any 1-3/4 OD x .120 wall or 1-1/2OD x .120 wall steel tubing in place of an end cap. This ain't no ice cream cone, 2 inches of solid steel give these spikes some serious muscle while providing the finishing touch to any custom tube-work application. Sold as a pair. Trail Spike Tube End; California Residents: WARNING
46.62 USD
Mountain Off Road Enterprises Tube End Inserts - TE10R
Want to build your own tie rods, track bars, radius arms or link bars, and need the tube ends inserts to perform the task? M.O.R.E has the most popular sizes. Tube ends weld to steel tubing to give you threaded ends for your custom project, without a lathe. Universal application;Bare steel;5/8 inch-18 right-hand tread;To be used with 1-1/8 inch X.188 wall D.O.M. Tubing; California Residents: WARNING
16.62 USD
RockJock 7/8 -14 Right Hand Threaded Bung - CE-9116B1
Custom machined, right hand thread, weld-in bung for use with forged Johnny Joint rod ends or any other 7/8-14 thread rod end. Hex shaped - not round - for ease of bar adjustment. Designed to fit into a tube with a 1 1/4 i.d. Threaded bung;7/8-14 right hand thread;Hex shaped;Designed to fit 1.25 inch ID tube;Sold individually; California Residents: WARNING
22.00 USD
Blue Torch Fabworks Link Inserts - BTF07003
BTF link inserts are cnc machined on a state of the art turning center. They are machined from cold roll steel. The weld surface has been machined to a 45 degree angle. It is recommended to cross drill the end of the tube to add additional area to weld. This insert was designed for 3/4 - 16 thread rod ends. It was designed to fit 1-1/2 od x 1/4 wall DOM meaning they will fit a inside dia of 1 inch. This part number is for RH thread only. Left hand inserts are available. Universal application;Machined from cold roll steel;Insert was designed for 3/4 inch - 16 thread rod ends;Designed to fit 1-1/2 inch od x 1/4 inch wall DOM meaning they will fit a inside diameter of 1 inch;Right hand thread only; California Residents: WARNING
7.99 USD
RockJock 3/4 -16 Left Hand Threaded Bung - CE-9112BL1
Custom machined, left hand thread, weld-in bung for use with forged Johnny Joint rod ends or any other 3/4 thread rod end. Hex shaped - not round - for ease of bar adjustment. Designed to fit into a tube with a 1 i.d. Threaded bung;3/4-16 left hand thread;Hex shaped;Designed to fit 1 inch ID tube;Sold individually; California Residents: WARNING
30.00 USD
Rubicon Express Tube Adapter - RM12000
Designed to weld into 1 inside diameter tube. Universal builder part;3/4 inch left hand thread;Welding required; California Residents: WARNING
10.99 USD