Advance Adapters 4.0L To CJ7 Series Transmission Conversion Aluminum Bellhousing - 712569
This adapter bellhousing assembly is used to adapt the Jeep 4.0L to the Jeep series SR4, T-4, T-5, T-150 & T-176 transmissions. Also fits 1972-86 AMC 232-258 6 cylinder and 304-401 V8 engines with SR-4, T-4, T-5, T-170, and T-150 transmissions. This kit is ideal when retro-fitting the Jeep 4.0L into a Jeep CJ series. The bellhousing kit includes a 356 T-6 aluminum bellhousing, universal dust cover plate, two pilot bushings with (.670 inch & .590 inch) inside pilot diameter, throw-out arm, ball pivot, throw-out boot, fastening hardware, and adapter instructions. Note: This bellhousing features two crankshaft positioning sensor locations for the 1987-2004 4.0L engines. Ideal for mounting a 4.0L into your CJ;Includes 2 pilot bushings; California Residents: WARNING
458.99 USD
Advance Adapters GM V8 Bellhousing for GM NV4550 - 712576
GM bellhousing for 1996-up GM with NV4550 with 5.125 index diameter. Bellhousing has stock GM bolt pattern and is 6 and 5/16 deep. Kit includes- one adapter bellhousing, one dust cover plate, one modified bearing retainer, one special pilot bearing, one clutch release arm, one ball pivot (installed), one clutch arm boot, and additional mounting hardware. Also includes instructions. ; California Residents: WARNING
435.99 USD
Advance Adapters AMC TH400 to GM Engine - 716133
Found in 1974-79 Jeep vehicles, these transmissions are bolted directly to the AMC engine with no factory cast iron adapter plate. The kit includes: bellhousing adapter, support bushing, spacers and hardware. A stock 153 or 168 tooth GM flywheel is also needed. Kit includes bellhousing adapter, support bushing, spacers and hardware; California Residents: WARNING
285.99 USD
Advance Adapters Chevy Bellhousing - 712548
Kit fits 1976-79 T-150 (1980-86) SR-4, T-4, T-5, and T-176/177 Jeep CJ transmissions. Transmission requires new 6 cylinder input shaft part #81314. For use with 1957-95 Chevy V8s and 4.3 V6. No driveline modifications required. The nose cone on the starters will have to be changed to # 1984097 168 nose cone. This bellhousing depth is 6.625. Kit includes: bellhousing, 2 special pilot bushings, dust cover plate and mounting hardware. This kit requires use of stock GM 168 or 153 tooth car flywheel. Other parts needed: 10-1/2 or 11 conversion disc and clutch cover assembly and part #614038 release bearing. This requires 1980-83 GM 4 cylinder slave cylinder and hose when using hydraulic clutch control system. T150, SR4, T4, T5 and T176/177 transmissions;Kit includes bellhousing, two special pilot bushings, dust cover plate and mounting hardware; California Residents: WARNING
404.99 USD
Advance Adapters Chevy to Torqueflite Adapter - 716138
Fits AMC 6 cylinder and V8 engines to GM TH350, 400, and 700R4 transmissions. This adapter can also be used on 1991-00 YJ and TJs with 4.0 liter engines; *only if the flywheel sensor located on the back of the engine is relocated to the harmonic balancer at the front of the engine. We sell a kit that will accomplish this, part # 8794033. Flex plate part #716138B would then work for the 4.0 liter application. With AMC 258 6 cylinder, 304, 360 or 401 V8 engines;GM TH350, TH400, 700R4; California Residents: WARNING
321.99 USD